The Measure app uses augmented reality (AR) technology to turn your device into a tape measure. You can gauge the size of objects, automatically detect the dimensions of rectangular objects and save a photo of the measurement. And with iPad Pro 12.9-inch (4th generation), iPad Pro 11-inch (2nd generation), iPhone 12 Pro and iPhone 12 Pro Max, you can measure objects more easily with visible guides, measure a person’s height and see a history of your measurements.
Measurements are approximate.
Before you start
First, make sure that your device's software is up to date. The Measure app works on these devices:
- iPhone SE (1st generation) or later and iPhone 6s or later
- iPad (5th generation or later) and iPad Pro
- iPod touch (7th generation)
Also make sure that you're in a place with good lighting.
How to take a single measurement
- Open the Measure app, then follow any on-screen instructions that ask you to move your device around. This gives your device a frame of reference for the object you're measuring and the surface it's on. Keep moving your device until a circle with a dot in the centre appears.
- Move your device so that the dot is over the starting point of your measurement, then tap the Add button .
- Slowly move your device until the dot is over the ending point of your measurement, then tap the Add button again.
After you take a measurement, you can adjust its starting and ending points. Touch and hold one of the points, then drag it where you want it to go. The measurement changes as you move the point.
Save your measurement
While the measurement is displayed, you can tap the number to see it in inches and centimetres. Tap Copy, and the value is sent to your clipboard so you can paste it into another app. Tap Clear to start again.
You can also take a photo that shows the object and its measurement. Just tap the Shutter button , and the photo appears in the lower-left corner of your screen. Tap it to make edits using Markup, or swipe left to save it to your Photos app.
How to take multiple measurements
- After you take the first measurement, move your device to place the dot over another location on or near the object.
- Tap the Add button to start the second measurement, then move your device to place the dot somewhere along the existing measurement.*
- Tap the Add button again and the second measurement appears.
- Repeat these steps to take as many measurements as you'd like.
Tap the Undo button to remove the most recent measurement, or tap Clear to start over.
* Additional measurements must start or end somewhere along an existing measurement. Otherwise, all previous measurements are replaced by the newest one.
Measure a rectangle
If your device detects that the object you're measuring is a square or rectangle, it automatically places a measurement box around the object. Tap the Add button and measurements appear for the object's width and length. Move your device slightly, and the object's calculated area appears.
While the measurement is displayed, you can tap the calculated area number to see the length of the diagonal as well as the area in square inches or square metres.
Use the Measure app with iPad Pro 12.9-inch (4th generation), iPad Pro 11-inch (2nd generation), iPhone 12 Pro and iPhone 12 Pro Max
iPad Pro 12.9-inch (4th generation), iPad Pro 11-inch (2nd generation), iPhone 12 Pro and iPhone 12 Pro Max use the LiDAR Scanner to help you measure objects more quickly and accurately with the Measure app.
Not sure if your device has a LiDAR Scanner? Find out which iPad model you have or which iPhone model you have.
Measure a person's height
When the Measure app detects a person in the viewfinder, it automatically measures their height from the ground to the top of their head, hat or hair. You can tap the shutter button to take a photo of the person with their height measurement. Then you can use Markup on the photo, save it and share it.
Here are some tips for getting a good height measurement:
- Make sure that you're in a place with good lighting.
- Avoid dark backgrounds and reflective surfaces.
- Check that the person you're measuring has nothing covering their face or head, such as a face mask, sunglasses or a hat.
- Try to step back from the person you're measuring. You might be standing too close.
Use vertical and edge guides
On iPad Pro 12.9-inch (4th generation), iPad Pro 11-inch (2nd generation), iPhone 12 Pro and iPhone 12 Pro Max, guidelines help you measure the height and straight edges of furniture, countertops, and other objects easily and precisely. Guide lines appear automatically along edges and when making a vertical measurement.
Snap your starting and ending points to the yellow guide line, then tap a measurement to see the expanded information that iPad Pro provides. You can view the measurement's elevation, distance away, angle and more.
See more granular measurements with Ruler View
The Measure app on iPad Pro 12.9-inch (4th generation), iPad Pro 11-inch (2nd generation), iPhone 12 Pro and iPhone 12 Pro Max adds a ruler overlay to line measurements, showing you the object's dimension in granular increments. Move your iPad Pro close to a line measurement to see the ruler view appear, then tap the shutter button to take a photo so you can use the increments for planning projects.
See your measurement history
Tap the list button to view all the measurements that you've taken during the current session, including screenshots that you've taken. This helps you keep track of dimensions as you measure a space or series of objects. You can copy the dimensions into Notes, Mail or any app you want to save your list in, or clear them to start over.
You can also use your iPhone or iPod touch as a level.