Synchronize ES2 oscillators in Logic Pro for iPad
Typical oscillator sync sounds tend toward the aggressive, screaming leads that synthesizer manufacturers like to talk about. The rectangular and sawtooth waveforms of oscillators 2 and 3 feature a Sync option. When this parameter is turned on, the phase of oscillator 2 or 3 is synchronized with oscillator 1.
Every time oscillator 1 starts a new oscillation phase, the synchronized oscillator (oscillator 2 or 3) is also forced to restart its phase from the beginning. Between the waveform cycles of oscillator 1, the waveform cycles of the synchronized oscillators run freely.
You can achieve interesting synchronized oscillator sounds by modulating the frequency of the synchronized oscillator with an envelope generator. This constantly changes the number of phases within a section of the synchronization cycle, resulting in corresponding changes to the frequency spectrum.
Modulate the synchronized oscillator frequency with an envelope
In Logic Pro, set the oscillator 2 Waveform knob to Synced Sawtooth or Synced Pulse.
In any Mod Matrix Slot, set up a modulation routing as follows: modulation target Pitch 2, source Env 2.
Adjust the settings of Envelope 2.
Download this guide: PDF