MDM

Dynamic WEP, WPA Enterprise and WPA2 Enterprise MDM settings for Apple devices

You can configure dynamic Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA and WPA2) Enterprise settings for Apple devices enrolled in an MDM solution. When configuring, you must select at least one EAP protocol and configure the EAP trust.

Setting	Description	Required
Available EAP protocols	Select an Extensible Authentication Protocol (EAP) type to use for 802.1X network authentication: TLS TTLS PEAP EAP-FAST EAP-AKA (requires no additional configuration)	Yes
EAP trust configuration	This is used by all EAP protocols. Specify which certificates should be trusted to validate the authentication server for the network connection. The Trusted Certificates list shows certificates added using the Certificates payload. Add the names of the trusted authentication servers to the Trusted Server Certificates Names list. Specify a particular server, such as server.example.com, or a partial name such as *.example.com.	Yes

Setting

Description

Required

Available EAP protocols

Select an Extensible Authentication Protocol (EAP) type to use for 802.1X network authentication:

TLS
TTLS
PEAP
EAP-FAST
EAP-AKA (requires no additional configuration)

Yes

EAP trust configuration

This is used by all EAP protocols.

Specify which certificates should be trusted to validate the authentication server for the network connection. The Trusted Certificates list shows certificates added using the Certificates payload. Add the names of the trusted authentication servers to the Trusted Server Certificates Names list. Specify a particular server, such as server.example.com, or a partial name such as *.example.com.

Yes

Helpful?

Mobile Device Management Settings

Dynamic WEP, WPA Enterprise and WPA2 Enterprise MDM settings for Apple devices