EVOC 20 Filterbank output controls in Logic Pro for iPad
The output parameters provide control over the level and stereo width. The output section also incorporates an integrated overdrive (distortion) circuit.

Output parameters
Output Level knob and field: Set the volume of the output signal.
Stereo knob and field: Distribute the output signals of the filter bands in the stereo field.
At the 0 position to the left, the outputs of all bands are centered.
At the centered position at the top, the outputs of all bands ascend from left to right.
At the full position to the right, the bands are output to the left and right channels alternately.
Distortion button: Turn the overdrive circuit on or off.
Note: To hear the overdrive effect, you might need to increase the level of one or both filter banks with the Boost A or Boost B sliders.
Stereo Mode pop-up menu: Choose the input/output mode.
In Mono/Stereo mode (mono input/stereo output), a stereo input signal is first summed to mono before being routed to the filter banks.
In Stereo/Stereo mode (stereo input/output), the left and right channels are processed by separate filter banks.
Download this guide: PDF