Delay pedals in Logic Pro for Mac

Blue Echo is a simple delay effect.

• On/Off switch: Turn on or turn off the pedal. The LED indicates the pedal state.

• Time knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.

• Repeats knob: Determine the number of delay repeats.

• Mix knob: Set the level balance between source and effect signals.

• Tone Cut switch: Choose a fixed frequency internal filter circuit that allows more low (Lo) or high (Hi) frequency content to be heard. Choose Off to turn off the filter.

• Mute button: Passes the source signal through to the next pedal, while delay repeats continue.

• Sync button: Turn on to synchronize the Time value with the host tempo.

Spring Box emulates a spring reverb effect.

• On/Off switch: Turn on or turn off the pedal. The LED indicates the pedal state.

• Time knob: Set the length of the reverberation to short, medium, or long values.

• Tone knob: Set the cutoff frequency, making the effect brighter or darker.

• Style knob: Switches between algorithms, each with different characteristics. You can choose Boutique, Simple, Vintage, Bright, or Resonant.

• Mix knob: Set the level balance between source and effect signals.

Tie Dye Delay is a warm-sounding reverse delay effect that’s perfect for fans of 1960s and 1970s psychedelic rock.

• On/Off switch: Turn on or turn off the pedal. The LED indicates the pedal state.

• Time knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.

• Feedback knob: Set the amount of effect output sent to the effect input, changing the tonal color, making the effect more pronounced, or both.

• Tone knob: Set the cutoff frequency, making the effect brighter or darker.

• Bright/Dark switch: Both positions apply a fixed frequency internal EQ.

• Mix knob: Set the level balance between source and effect signals.

• Listen button: Passes the source signal through to the next pedal while delay repeats continue.

• Sync button: Turn on to synchronize the Time value with the host tempo.

Tru-Tape Delay emulates a vintage tape delay effect.

• On/Off switch: Turn on or turn off the pedal. The LED indicates the pedal state.

• Norm/Reverse switch: Change the delay playback direction. LED color indicates the switch state.

• Lo/Hi Cut knobs: Adjust the range of the fixed frequency internal EQ.

• Dirt knob: Set the amount of input signal gain, which can introduce an overdriven, saturated quality.

• Flutter knob: Emulate speed fluctuations in the tape transport mechanism.

• Sync button: Turn on to synchronize the Time value with the host tempo.

• Time knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.

• Feedback knob: Set the amount of effect output sent to the effect input. The buildup of repeating signals can be used creatively for dub-delay and other effects by adjusting Feedback in real time.

• Mix knob: Set the level balance between source and effect signals.