Multipressor display parameters in MainStage
Multipressor parameters are grouped into three main areas the graphic display in the upper section, the set of controls for each frequency band in the lower section, and the output parameters at the right.
Display parameters
Graphic display: View and adjust the frequency and gain for each frequency band. The amount of gain change from 0 dB is indicated by blue bars. The band number appears in the center of active bands. You can adjust each frequency band in the following ways:
Drag the horizontal bar up or down to adjust the gain makeup for that band.
Drag the vertical edges of a band to the left or right to set the crossover frequencies, which adjusts the overall band frequency range.
Crossover fields: Drag to set the crossover frequency between adjacent bands.
Gain Make-up fields: Drag to set the amount of the gain make-up for each band.