Mac Studio (2025) Housing
Before You Begin
Warning
Read Mac Electrical Safety and follow workspace handling guidelines before you begin.

Remove the following parts before you begin:
Tools
Torx T7 screwdriver
Refer to a full list of tools required for all repairs.
Note: You can remove the logic board with antenna 1, fan, battery, and left SSD module installed.
Removal
Note: If you’ve already completed the removal steps, skip to reassembly.
Stand the housing on its back side as shown.
Use the T7 screwdriver to remove the two T7 standoff screws (923-12503) from the housing.
Note: A replacement housing includes the power button (1) and status indicator light (2). The power button is also available as a replacement part.

Reassembly
Use the T7 screwdriver to install the two T7 standoff screws (923-12503) into the housing.
Reinstall the following parts to complete reassembly:
SSD module (right SSD module only)