Mac Studio (2025) Power Cord Port

Before You Begin

Warning

Read Mac Electrical Safety and follow workspace handling guidelines before you begin.

Remove the following parts before you begin:

Tools

  • No tools are required for this procedure.

Caution

The power cord port is held in place by the Ethernet board and the combination I/O board. Don’t stand the computer on its side after those parts are removed. The power cord port could fall out and damage the logic board.

Removal

Note: If you’ve already completed the removal steps, skip to reassembly.

  1. Lift the power cord port out of the housing.

Reassembly

  1. Position the power cord port in the housing.

  2. Reinstall the combination I/O board and Ethernet board to secure the power cord port in the housing.

Reinstall the following parts to complete reassembly:

Published Date: