Final Cut Pro User Guide
- Welcome
-
- What’s new in Final Cut Pro 10.5
- What’s new in Final Cut Pro 10.4.9
- What’s new in Final Cut Pro 10.4.7
- What’s new in Final Cut Pro 10.4.6
- What’s new in Final Cut Pro 10.4.4
- What’s new in Final Cut Pro 10.4.1
- What’s new in Final Cut Pro 10.4
- What’s new in Final Cut Pro 10.3
- What’s new in Final Cut Pro 10.2
- What’s new in Final Cut Pro 10.1.2
- What’s new in Final Cut Pro 10.1
- What’s new in Final Cut Pro 10.0.6
- What’s new in Final Cut Pro 10.0.3
- What’s new in Final Cut Pro 10.0.1
-
- Intro to effects
-
- Intro to transitions
- How transitions are created
- Add transitions
- Set the default transition
- Delete transitions
- Adjust transitions in the timeline
- Adjust transitions in the inspector and viewer
- Merge jump cuts with the Flow transition
- Adjust transitions with multiple images
- Modify transitions in Motion
-
- Add storylines
- Use the precision editor
- Conform frame sizes and rates
- Use XML to transfer projects
-
- Glossary
- Copyright
If your camera isn’t recognized in Final Cut Pro
If you’ve connected your camera or device to your computer but the Media Import window doesn’t open, or your device can’t be controlled from within Final Cut Pro, there are several things you can do to try to establish the connection.
Check your equipment and system
Before importing media into Final Cut Pro, make sure that you’re using the correct equipment configuration:
Your camcorder or camera must be compatible with Final Cut Pro. For a list of compatible devices, see the Apple Support article Cameras supported by Final Cut Pro.
Your device must be properly connected to your computer.
Your camcorder must be set to the correct output mode. On some camcorders, this is called VTR or VCR mode, but not all camcorders use the same terminology, so check the documentation that came with your device. On some camcorders you must set the output to DV mode or HDV mode, depending on whether the content is standard (DV) or high definition (HDV).
If you’re connecting a tape-based camcorder to your computer, you should be using a FireWire cable (also called IEEE 1394, or i.LINK), not a USB cable.
If you’re importing video clips from a still camera or other flash memory device, make sure the file format of your video is compatible with Final Cut Pro. See Media formats supported in Final Cut Pro.
If your still camera is not supported by Final Cut Pro, try importing the media as files, using a card slot on your Mac or an external card reader. See Import into Final Cut Pro from your Mac or storage device.
See Import into Final Cut Pro from your Mac or storage device.
If you’ve enabled Fast User Switching, make sure no one else is trying to use the camcorder from a different account at the same time.
If you still can’t import media after checking the items above, try the following:
Turn the device off and on again.
Disconnect the cable from both the device and your Mac, then reconnect it.
Quit and then reopen Final Cut Pro.
Restart your Mac.
Try using a different cable.
Try using a different computer with Final Cut Pro installed.
If you’re using a file-based camcorder, use the Finder to copy the mounted volume to a local disk. Then open the files in Final Cut Pro in the same way that you open an archive.
Note: When you see red frames and a yellow alert triangle in the timeline or in an event, it means that part of your project or event is missing. See Alert icons in Final Cut Pro.