M-Audio iControl Assignment buttons in Logic Pro
You can use the buttons along the left side of the iControl, in the areas labeled All Tracks and Selected Track, to select different functions for the rotary encoders located along the right edge, in the channel strip area. In some cases, the channel strip area controls can change the functionality of the Select buttons.
Volume button: Press the Volume button to assign the rotary encoders (in the channel strip area) to control volume for the eight active channels. The channel strip buttons—Select, Record Enable, Mute, and Solo—work as described in M-Audio iControl channel strip controls in Logic Pro.
Pan button: Press the Pan button to assign the rotary encoders to control the pan/balance of the eight active channels. The channel strip button functionality is as per their defaults.
Track Info button: Press the Track Info button to activate Channel view. In this view, you can use the Select (Sel) buttons and rotary encoders to edit global parameters of the selected channel strip. The Record Enable, Mute, and Solo buttons retain their default functions.
Sel button 1 to 5: Switches the bypass state of the first five Insert slots.
Sel button 6 and 7: Switches the bypass state of the first and second Send slots.
Sel button 8: Not assigned
In Channel view, each of the Select buttons is lit when the respective Insert or Send slot is enabled, and unlit when the slot is bypassed.
Encoder 1: If the selected channel is an audio channel strip with a Noise Gate effect, controls the Threshold parameter of the Noise Gate (if inserted in the selected channel strip).
Encoder 2: If the selected channel is an audio channel strip with a Compressor effect, controls the Compressor’s Ratio.
Note: The assignments for Encoder 1 and 2 are optimized for GarageBand Real Instrument tracks, which have a default Noise Gate and Compressor effect inserted.
Encoder 3: Not assigned
Encoder 4: Not assigned
Encoder 5: Controls the Pan knob of the channel.
Encoder 6: Controls the send level for the first send of the channel.
Encoder 7: Controls the send level for the second send of the channel.
Encoder 8: Controls the Volume fader of the channel.
Generator button: If the selected channel strip is a software instrument channel strip, pressing the Generator button assigns the rotary encoders to edit the sound generation parameters of the instrument. These assignments are in groups of eight parameters. The Arrow Up and Arrow Down buttons switch to the previous or next page of eight parameters. Use of the Generator button has no effect if the selected channel strip is not a software instrument channel strip.
Effect 1 and Effect 2 buttons: Press Effect 1 to assign the rotary encoders to edit the parameters of the third Insert slot of the selected channel strip. Press Effect 2 to assign the rotary encoders to edit the parameters of the fourth Insert slot (if a fourth Insert slot exists). The Arrow Up and Arrow Down buttons switch to the previous or next page of parameters.
Hold down Option while pressing the Effect 1 or Effect 2 button to switch the bypass state of Insert slots 3 and 4, respectively.
When using the Arrow buttons to switch between parameter pages—accessed through use of the Generator, Effect 1, or Effect 2 button—the parameters change in groups of eight (unless the parameters on the last page do not make a complete group of eight). For example, if a plug-in has 19 parameters and the iControl is controlling parameters 1 to 8:
Press the Arrow Up button to shift to parameters 9 to 16.
Press the Arrow Up button again to shift to parameters 12 to 19.
Press the Arrow Down button to shift back to parameters 9 to 16, not 4 to 11.
This way, you always revert to the page positions you expect to find and are comfortable with.
EQ button: Press the EQ button to edit the EQ parameters of the selected channel strip. If a Channel or Linear Phase EQ is inserted in the selected channel strip, pressing the EQ button opens the EQ plug-in window. If no Channel or Linear Phase EQ exists on the selected channel strip, a Channel EQ is inserted automatically. The Arrow Up and Arrow Down buttons switch to the next or previous parameter page.
Each Assignment button has two modes—Mixer view and Channel view—that determine whether the rotary encoders (and in some cases, the Select buttons) edit separate channels or the same channel. For more information, see M-Audio iControl Mixer and Channel view in Logic Pro.
Download the guides:
Logic Pro User Guide: Apple Books | PDF
Logic Pro Instruments: Apple Books | PDF
Logic Pro Effects: Apple Books | PDF
Control Surfaces Support Guide: Apple Books | PDF