Ringshifter Envelope Follower controls in Final Cut Pro
The Ringshifter oscillator Frequency and Dry/Wet parameters can be modulated with the internal envelope follower—and the LFO (see Ringshifter LFO modulation controls in Final Cut Pro). The oscillator frequency even allows modulation through the 0 Hz point, thus changing the oscillation direction.
The envelope follower analyzes the amplitude (volume) of the input signal and uses this to create a continuously changing control signal—a dynamic volume envelope of the input signal. This control signal can be used for modulation purposes.
For information about adding the Ringshifter effect to a clip and showing the effect’s controls, see Add Logic effects to clips in Final Cut Pro.
Power button: Turn the envelope follower on or off.
Sens (Sensitivity) slider and field: Determine how responsive the envelope follower is to the input signal. At lower settings, the envelope follower reacts only to the most dominant signal peaks. At higher settings, the envelope follower tracks the signal more closely, but may react less dynamically.
Attack slider and field: Set the response time of the envelope follower.
Decay slider and field: Control the time it takes the envelope follower to return from a higher to a lower value.