macOS High Sierra
“导航”偏好设置
使用“系统偏好设置”中“切换控制”辅助功能内的“导航”面板来设定使用“切换控制”进行导航的选项。
若要打开此面板,请选取苹果菜单 >“系统偏好设置”,点按“辅助功能”,点按“切换控制”,然后点按“导航”。
导航时 | 通过播放声音和/或朗读项目指明项目在扫描期间何时高亮显示。 若要更改所使用的声音,请选取苹果菜单 >“系统偏好设置”,点按“辅助功能”,然后点按“语音”。 |
重新开始位置 | 重新扫描项目(如面板、群组或窗口)时从中开始的位置。 |
选择后自动扫描 | 默认情况下,在选择某个项目时,会暂停自动扫描;您必须按下“选择项目”切换才能继续自动扫描。若要使自动扫描在选择项目后自动继续,请点按弹出式菜单,然后选取“继续”。 |
指针到达边缘时 | 当扫描用户界面时,指针到达边界时要执行的操作。 |
切换控制光标大小 | 扫描用户界面时的“切换控制”的边框粗细。 |
指针精度 | 选择屏幕上的项目时控制指针的精度。 低:按下“选择项目”切换时,蓝线(用于“移动”、“移动与点按”和“滑移”)或指针(用于“旋转”)会停止。 高:按下“选择项目”切换时,蓝线或指针明显减慢,以便可以更准确地选择其停止位置;当您再次按下切换时,它会停止。 |
循环 | 扫描面板、群组或窗口的次数,最多 10 次。 |
定时 | 设定导航的定时选项: 滑动与旋转光标速度:块、扇区和蓝线在屏幕上移动的速度,从 0(最慢)到 100(最快)。 面板中的自动扫描间隔:在面板中从一个项目步进到另一个项目所需的秒数,最多 25 秒。 界面中的自动扫描间隔:在用户界面中从一个项目步进到另一个项目所需的秒数,最多 25 秒。 在第一项上暂停:自动扫描在面板、群组或用户界面中停在第一个项目处的秒数,最多 10 秒。 |
另请参阅使用切换控制