Space Designer Output EQ in Logic Pro for iPad
Space Designer has a six-band Output EQ consisting of high and low pass bands, two parametric mid-bands, plus a low shelving filter and a high shelving filter.
Output EQ parameters
Output EQ On/Off button: Turn on or turn off the Output EQ, which adjusts frequencies of the overall combined reverb and source signal.
Low Cut button: Turn on a highpass filter that allows high frequencies to pass and cuts the level of low frequencies below the set frequency.
Low Cut Freq knob and field: Set the frequency for the Low Cut band.
Low Cut Order pop-up menu: Choose the filter rolloff amount for the Low Cut band. Higher order filters have a steeper rolloff.
Low Cut Q field: Set the Q factor—the width—for the Low Cut band. Low values result in a narrow frequency band selection. High values encompass a broad frequency band.
Low Shelf button: Turn on the low shelving filter to increase or decrease the frequencies below/above the Frequency value.
Low Shelf Freq knob and field: Set the frequency for the Low Shelf band.
Low Shelf Gain knob and field: Cut or boost the Low Shelf band.
Low Shelf Q field: Set the Q factor—the width—for the Low Shelf band. Low values result in a narrow frequency band selection. High values encompass a broad frequency band.
Low Mid button: Turn on a parametric bell filter with three controls.
Low Mid Freq knob and field: Set the frequency for the Low Mid band.
Low Mid Gain knob and field: Cut or boost the Low Mid band.
Low Mid Q field: Set the Q factor—the width—for the Low Mid band. Low values result in a narrow frequency band selection. High values encompass a broad frequency band.
High Mid button: Turn on a parametric bell filter with three controls.
High Mid Freq knob and field: Set the frequency for the High Mid band.
High Mid Gain knob and field: Cut or boost the High Mid band.
High Mid Q field: Set the Q factor—the width—for the High Mid band. Low values result in a narrow frequency band selection. High values encompass a broad frequency band.
High Shelf button: Turn on a high shelving filter to increase or decrease the frequencies below/above the Frequency value.
High Shelf Freq knob and field: Set the frequency for the High Shelf band.
High Shelf Gain knob and field: Cut or boost the High Shelf band.
High Shelf Q field: Set the Q factor—the width—for the High Shelf band. Low values result in a narrow frequency band selection. High values encompass a broad frequency band.
High Cut button: Turn on a lowpass filter that allows low frequencies to pass and cuts the level of high frequencies above the set frequency.
High Cut Freq knob and field: Set the frequency for the High Cut band.
High Cut Order pop-up menu: Choose the filter rolloff amount for the High Cut band. Higher order filters have a steeper rolloff.
High Cut Q field: Set the Q factor—the width—for the High Cut band. Low values result in a narrow frequency band selection. High values encompass a broad frequency band.
Download this guide: PDF