Use the Euphonix Inserts knobset in Logic Pro

This knobset allows you to:

Note: This knobset only relates to insert effects and not to instrument plug-ins.

Edit an effect plug-in

With your EuCon device connected to Logic Pro:

Press the Inserts knob top, or key, to display all effect plug-ins inserted in the currently selected channel strip. This key is labeled “*” (asterisk) on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The effect plug-in names are displayed on the Soft Keys, the touchscreen, or the display, depending on the system you are using.
If more than eight effect plug-ins are inserted, you can use the Page keys to display ensuing plug-ins.
Press the knob top that features the name of the effect plug-in you want to edit.
The parameters are displayed in the order shown in the Controls view of the effect.
Rotate the respective knob to change the value.
Depending on the system you are using, for parameters with only two values, you can either press the On key, or turn the respective knob, to switch between the two values. The On key is lit when the value is 1 (or on) and unlit when the value is 0 (or off).
Pressing a knob top sets the controlled parameter to its default value.
If there are more than eight parameters, use the Page keys to navigate between them.
Press the Back key to return to the top-level knobset.

With your EuCon device connected to Logic Pro:

Press the Inserts knob top or key. The key is labeled “*” (asterisk) on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
Press both Page keys simultaneously to display the Inserts Configuration knobset.
The first eight Insert slots of the selected channel strip are displayed.
If an Insert slot already contains an effect plug-in, the On key is lit (on the MC Professional and MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the knob image.
Select the Insert slot you want by pressing the respective knob top. Press the Page keys to display Insert slots 9 to 15.
The Effect plug-in menu appears. Press the Page keys to display ensuing plug-ins and to move through the effect plug-in hierarchy.
Choose the effect plug-in you want:
- Pressing the knob top enters a submenu or inserts a selected effect plug-in.
- Pressing the Back key navigates up one level in the menu hierarchy.

Helpful?