CM Labs Motormix Select buttons in Logic Pro

The Select buttons (the buttons just below the LCD) have multiple uses, depending on the current mode.

Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates that the control has an alternate use while the modifier is held down.

Mode				Assignment
Normal				Selects the channel displayed in the upper LCD line. Channels can be shifted to the left and right with the View left and right buttons.
Bank button LED flashing				Channel View: Select buttons switch between displayed channel strips: 1: Switches to Single view. 2: Switches to Arrange view. 3: All view, MIDI channels 4: All view, input channels 5: All view, audio channels 6: All view, instrument channels 7: All view, aux and bus channels 8: All view, output and master channels
WINDOW/tool button LED on				Window Select mode: Select buttons open, assign key focus, or close a particular window type. LED off: If the window is not open, the button opens it. LED on: If the window is open but does not have key focus, the button activates it. LED flashes: If the window has key focus, the button closes it. 1: Tracks window 2: Mixer 3: Event List 4: Score Editor 5: Step Editor 6: Piano Roll Editor 7: Control bar 8: Project Audio Browser
WINDOW/tool button flashes				Select Tool mode: Select buttons choose a tool. 1: Pointer 2: Pencil 3: Eraser 4: Text tool 5: Scissors 6: Glue tool 7: Solo tool 8: Mute tool
PLAY/transport button flashes				Transport section mode 1: Record 2: Pause 3: Stop 4: Play 5: Rewind 6: Fast Forward Upper LCD row displays current playhead position.
STOP/locate button flashes				Locate mode 1: Goes to the left locator. 2: Goes to the right locator. 3: Enables or disables Cycle mode. 4: Enables or disables Autopunch mode. 5: Enters Marker mode (see below). 6: Opens Marker List. Upper LCD row displays the current playhead position.
Marker mode				1 to 6: Select markers 1 to 6. Marker names are displayed in the upper LCD row. 7: Creates a new marker. 8: Deletes the selected marker.
Group Edit mode				Switches between group parameters. Parameter display can be shifted by the View left and right buttons when the SHIFT button is held down.
Effect Assign mode				Enters Effect Edit mode for the selected channel.
Effect Edit mode				Enables or disables the selected parameter, or resets it to the default value.
Instrument Assign mode				Enters Instrument Edit mode for the selected (instrument) channel.
Instrument Edit mode				Enables or disables the selected parameter, or resets it to the default value.

Note: In modal dialogs, the Select buttons generate the computer keyboard character shown on the button face.

Helpful?

Control Surfaces Support Guide for Logic Pro X

CM Labs Motormix Select buttons in Logic Pro