Change camera settings in Final Cut Pro for iPad

You can set the codec, color space, frame size, and frame rate when recording in pro camera mode.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

2. In the camera screen, tap the camera settings at the top of the screen.

   

3. Do any of the following:

   • Set the codec: Tap the codec, then tap HEVC (H.265) or ProRes.

   • Set the color space: Tap the color space, then tap SDR (Rec. 709) or HDR (HLG).

   • Set the frame size: Tap the frame size, then tap 720p, 1080p, or 4K.

   • Set the frame rate: Tap the frame rate, then tap 24, 25, 30, or 60 fps. Frame rates up to 240 frames per second (fps) are available with certain devices and frame sizes.

   As you make your selections, Final Cut Pro calculates the maximum recording time based on the available storage space on your iPad.

   

4. Tap to close the camera settings.

Most settings are retained until you change them, even if you quit and reopen Final Cut Pro. You can also access these settings by tapping in the camera screen.

In pro camera mode in Final Cut Pro, the current zoom level is indicated by the lens focal length buttons. Each button represents a different lens on your particular model of iPad (for example, 13 mm and 24 mm). You can change the lens before shooting and adjust the zoom level during shooting.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

2. In the camera screen, do one of the following:

   • Switch between lenses: Tap a lens button to switch between lenses (24 mm to 13 mm, for example). You can’t switch between lenses during recording.

   • Drag the Continuous Zoom slider: Tap , then drag the slider to change the zoom level. You can control the rate of zoom by the distance you drag.

     Unlike the zoom controls in Camera on iPhone or iPad, the Continuous Zoom slider in pro camera mode is constrained to one lens at a time for smooth zooming.

   • Use the pinch gesture: In the viewfinder, pinch open to zoom in, or pinch closed to zoom out.

The camera maintains the zoom level until you change it or close the camera.

By default, pro camera mode in Final Cut Pro sets the exposure automatically, but you can manually adjust the exposure of your image. For example, if you’re shooting indoors (with less light) and want to show the detail of a subject through a window (which has more light), you can adjust the exposure to reveal the subject outside the window.

Deliberately underexposing or overexposing the image can also create a certain mood or feeling in the shot.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

2. In the camera screen, do one of the following:

   • Set the exposure for a subject: Tap the subject.

     Note: This method also sets the focus on the subject.

   • Adjust the automatic exposure setting: Tap , then drag the dial. This method doesn’t completely turn off autoexposure. Rather, it adjusts the automatic exposure setting lighter or darker.

     To reset the exposure, double-tap the dial.

   • Set exposure manually: Tap , tap Auto, then do any of the following:

     • Tap Shutter, then drag the dial to adjust the exposure duration.

     • Tap ISO, then drag the dial to set the ISO rating.

   To reset the exposure, double-tap the dial.

3. Tap to close the exposure controls.

The camera maintains your exposure setting until you change it or close the camera.

When recording with the rear camera on your iPad, you can manually focus on particular subjects.

You can’t change the focus for the front-facing camera.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

   By default, the camera is set to autofocus and focuses on the nearest subject. The camera recognizes people, animals, and many common objects.

2. Do one of the following:

   • Focus using a subject: Tap a subject in the camera’s viewfinder. The camera focuses (and sets exposure) based on that subject’s current location. If the camera loses focus, it reverts to the default autofocus (and autoexposure) in the center of the viewfinder.

   • Lock focus and exposure: Touch and hold a subject in the camera’s viewfinder to lock focus and exposure. A yellow AE/AF Lock indicator appears at the top of the screen. To unlock, tap anywhere on the screen.

   • Focus manually: Tap , tap Auto, then drag the dial to set a focal length. To reset the focus, double-tap the dial. To switch back to autofocus, tap Manual.

When you focus manually, the camera maintains your manual focus setting until you switch to autofocus or close the camera. If you touch and hold a different subject while a manual focus setting is active, the camera locks the exposure to the new subject, and a yellow AE Lock indicator appears at the top of the screen.

White-balancing an image removes color casts and ensures that white objects in the image appear white.

You can also adjust the white balance manually to set the mood for a shot. For example, setting the white balance cooler (lower) can give the scene a colder or harsher feel. Setting the white balance warmer (higher) can make the scene feel more inviting.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

2. In the camera screen, tap .

   By default, the white balance is set automatically to create a neutral white balance for the scene.

3. Do one of the following:

   • Set the white balance using a subject: Tap a subject in the camera’s viewfinder to create a neutral white balance for that subject.

   • Lock the white balance to the current level: Tap the button at the bottom of the White Balance dial, then tap Fixed. By default, the button at the bottom of the dial is set to Auto.

     

   • Set the white balance to a custom level: Drag the dial.

     To reset the white balance, double-tap the dial.

   • Set the white balance automatically: Tap the button at the bottom of the White Balance dial, then tap Automatic.

   • Use a white-balance preset: Tap the button at the bottom of the White Balance dial, then tap a preset.

     White-balance presets include the following:

     • Daylight (5600K)

     • Shadow (7000K)

     • Cloudy (6000K)

     • Tungsten (3200K)

     • Fluorescent (4000K)

     • Flash (5500K)

4. To close the White Balance controls, tap .

The camera maintains your white-balance setting until you set the white balance to Automatic.

Pro camera mode in Final Cut Pro can stabilize any shakes and bumps while you record video.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

2. Tap , tap Preferences, then turn on Stabilization.

3. Tap .

You can switch between the rear and front-facing camera on your iPad.

1. In Final Cut Pro for iPad, open a project, tap in the toolbar, then tap Pro Camera.

2. In the camera screen, tap .