iPhone 12 and later: Camera Issues

Troubleshooting camera or LiDAR issues

Troubleshooting TrueDepth camera or Face ID issues

Troubleshooting camera or LiDAR issues

Identify issues

Read this article if you notice any of the following issues:

  • Photo or video image issue

    • Blurry or fuzzy

    • Too dark or too light

    • Colored lines or bands

    • Spots

    • Incorrect color balance

    • Abnormal flare, haze, or spot near the edge

    • Brightly colored scratches

  • Camera issue

    • Can’t take photos

    • Can’t record video

    • No preview visible in Camera app

    • Camera app quits unexpectedly

    • LED flash not working

    • Camera app doesn’t switch between camera and TrueDepth camera

    • Camera has issues switching to the telephoto camera for optical zoom beyond 2x in bright light conditions

    • Dust or other foreign material in camera lens

  • LiDAR issue

If the camera or flash on your iPhone, iPad, or iPod touch isn't working

If the issue wasn’t resolved by following a support article, continue to the next section.

Try quick troubleshooting steps

  1. Clean all camera lenses with a soft, slightly damp, lint-free cloth — for example, a lens cloth.

    • Important: Unplug all cables and turn off the iPhone first. Don't use products containing bleach or hydrogen peroxide. Avoid getting moisture in any openings, and don't submerge the iPhone in any cleaning agents. Don't use compressed air.

  2. Remove any case, accessory, or film that may block the camera or flash or that places a magnet near the camera. Remove all accessories before testing. Magnetic accessories might interfere with iPhone cameras.

  3. Inspect the iPhone for damage around the camera. Any damage to the camera, such as from dropping the iPhone, may require a camera repair.

Run manual and diagnostic tests

If the issue wasn’t resolved by following a support article or checking for potential causes, run these diagnostic and manual tests to help isolate the cause of the issue:

  1. Run the Mobile Resource Inspector (MRI) diagnostic suite.

  2. Run the Camera Image Quality diagnostic suite.

  3. Take a photo from the lock screen using the Camera app to test camera quality.

Open and inspect the iPhone

If the issue wasn’t resolved or isolated by following support articles or running diagnostics tests, refer to the iPhone repair manual to open and inspect the iPhone. A damaged or out-of-place part may be causing one of the issues.

Note: This section requires ordering parts and tools. Replacing a part may not resolve the device’s issue. You can find other service options at support.apple.com/repair.

Replace the part

If the issue wasn’t resolved or isolated by following the previous steps, replace the camera. Replace the back glass in iPhone 14 and 14 Plus models to resolve camera flash issues.

Note: This section requires ordering parts and tools. Replacing a part may not resolve the device’s issue. You can find other service options at support.apple.com/repair.

Troubleshooting TrueDepth camera or Face ID issues

Identify issues

Read these articles if you notice any of the following issues:

  • Photo or video image issue

    • Blurry or fuzzy

    • Too dark or too light

    • Colored lines or bands

    • Spots

    • Incorrect color balance

    • Abnormal flare, haze, or spot near the edge

    • Brightly colored scratches

  • Camera issue

    • Can’t take photos

    • Can’t record video

    • No preview visible in Camera app

    • Camera app quits unexpectedly

    • Camera app doesn’t switch between camera and TrueDepth camera

    • Dust or other foreign material in camera lens

  • Face ID issue

    • Can’t set up Face ID

    • Can’t recognize a person's face

    • Can’t unlock iPhone using Face ID

    • Can’t make a purchase using Face ID

    • “Face ID has been disabled” alert appears

If the camera or flash on your iPhone, iPad, or iPod touch isn't working

If an alert says Face ID has been disabled on your iPhone or iPad Pro

If the issue wasn’t resolved by following a support article, continue to the next section.

Try quick troubleshooting steps

  1. Clean all camera lenses with a soft, slightly damp, lint-free cloth — for example, a lens cloth.

    • Important: Unplug all cables and turn off the iPhone first. Don't use products containing bleach or hydrogen peroxide. Avoid getting moisture in any openings, and don't submerge the iPhone in any cleaning agents. Don't use compressed air.

  2. Remove any case, accessory, or film that may block the camera or flash or that places a magnet near the camera. Remove all accessories before testing.

  3. Ensure that your eyes, nose, and mouth are fully visible to the TrueDepth camera. If you're wearing sunglasses that block certain types of light, try using Face ID without sunglasses.

  4. Ensure that the iPhone is 10–20 inches from your face.

Run manual and diagnostic tests

If the issue wasn’t resolved by following a support article or checking for potential causes, run these diagnostic and manual tests to help isolate the cause of the issue:

  1. Run the Mobile Resource Inspector (MRI) diagnostic suite.

  2. Run the Face ID diagnostic suite.

  3. Take a photo from the lock screen using the Camera app with the TrueDepth camera to test camera quality.

Open and inspect the iPhone

If the issue wasn’t resolved or isolated by following support articles or running diagnostics tests, refer to the iPhone repair manual to open and inspect the iPhone. A damaged or out-of-place part may be causing one of the issues.

Note: This section requires ordering parts and tools. Replacing a part may not resolve the device’s issue. You can find other service options at support.apple.com/repair.

Replace the part

If the issue wasn’t resolved or isolated by following the previous steps, replace the TrueDepth camera.

Note: This section requires ordering parts and tools. Replacing a part may not resolve the device’s issue. You can find other service options at support.apple.com/repair.

Published Date: