Products, services, and OS functions
may not be available in this country.

11.2

11.0

10.7.3

10.6

10.5

Select version:

Modifying this control will update this page automatically

Table of Contents

Yamaha DM2000 Encoder and Fader Mode controls in Logic Pro

The table outlines the ENCODER MODE and FADER MODE controls and their assignments.

Control				Assignment
PAN				Assigns pan/surround control to encoders. In Insert Display mode, assigns pan/surround parameters of the selected channel strip to virtual encoders. In Channel Display mode, assigns pan/surround parameters of the 16 channel strips in current bank selection to virtual encoders.
AUX/MTRX				Assigns Send level control to encoders. In Insert Display mode, assigns Send level parameter of the selected channel strip to virtual encoders. In Channel Display mode, assigns Send level parameters of the 16 channel strips in current bank selection to virtual encoders.
ASSIGN 1				Assigns channel strip input assignment to encoders. While held down, the channel strip display shows the current channel strip input assignment.
ASSIGN 2				Assigns channel strip output assignment to encoders. While held down, the channel strip display shows the current channel strip output assignment.
ASSIGN 3				When encoders display a Send level, switches them to Send Destination assignment mode. Press the encoder button (or ASSIGN 3 again) to confirm the assignment.
ASSIGN 4				Determines mode of channel strip SEL buttons: Indicator off: SEL button used for channel strip selection Indicator on: SEL button used for insert selection or insert bypass, depending on MATRIX SELECT [MATRIX 4]
FADER				Enables or disables Flip mode.
AUX/MTRX				Enables or disables Flip mode.

Download the guides:

Logic Pro User Guide: PDF

Logic Pro Instruments: PDF

Logic Pro Effects: PDF

Control Surfaces Support Guide: PDF

Helpful?