Tascam US-2400 encoders in Logic Pro
In CHAN mode (CHAN button on), the encoders control these parameters on the selected channel:
Control | Assignment | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Encoder 1 (AUX 1) | Controls Send 1 level. | ||||||||||
Encoder 2 (AUX 2) | Controls Send 2 level. | ||||||||||
Encoder 3 (AUX 3) | Controls Send 3 level. | ||||||||||
Encoder 4 (AUX 4) | Controls Send 4 level. | ||||||||||
Encoder 5 (AUX 5) | Controls Send 5 level. | ||||||||||
Encoder 6 (AUX 6) | Controls Send 6 level. | ||||||||||
Encoder 7 | Controls Send 7 level. | ||||||||||
Encoder 8 | Controls Send 8 level. | ||||||||||
Encoder 11 (GAIN 1) | Controls the Gain parameter of band 3, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 12 (FREQ 1) | Controls the Frequency parameter of band 3, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 13 (Q 1) | Controls the Q factor of band 3, if a Channel or Linear Phase is inserted. | ||||||||||
Encoder 14 (GAIN 2) | Controls the Gain parameter of band 4, if a Channel or Linear Phase is inserted. | ||||||||||
Encoder 15 (FREQ 2) | Controls the Frequency parameter of band 4, if a Channel or Linear Phase is inserted. | ||||||||||
Encoder 16 (Q 2) | Controls the Q factor of band 4, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 17 (GAIN 3) | Controls the Gain parameter of band 5, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 18 (FREQ 3) | Controls the Frequency parameter of band 5, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 19 (Q 3) | Controls the Q factor of band 5, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 20 (GAIN 4) | Controls the Gain parameter of band 6, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 21 (FREQ 4) | Controls the Frequency parameter of band 6, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 22 (Q 4) | Controls the Q factor of band 6, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 24 (PAN) | Controls Panning. | ||||||||||
In CHAN mode, with the SHIFT button held down, the encoders control the following parameters on the selected channel:
Control | Assignment | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Encoder 1 (AUX 1) | Controls Pan/Surround Angle. | ||||||||||
Encoder 2 (AUX 2) | Controls Surround Radius. | ||||||||||
Encoder 3 (AUX 3) | Controls Surround LFE (level). | ||||||||||
Encoder 4 (AUX 4) | Controls Surround Spread. | ||||||||||
Encoder 5 (AUX 5) | Controls Surround X. | ||||||||||
Encoder 6 (AUX 6) | Controls Surround Y. | ||||||||||
Encoder 11 (GAIN 1) | Controls the Slope parameter of band 1, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 12 (FREQ 1) | Controls the Frequency parameter of band 1, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 13 (Q 1) | Controls the Q factor of band 1, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 14 (GAIN 2) | Controls the Gain parameter of band 2, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 15 (FREQ 2) | Controls the Frequency parameter of band 2, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 16 (Q 2) | Controls the Q factor of band 2, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 17 (GAIN 3) | Controls the Gain parameter of band 7, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 18 (FREQ 3) | Controls the Frequency parameter of band 7, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 19 (Q 3) | Controls the Q factor of band 7, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 20 (GAIN 4) | Controls the Slope parameter of band 8, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 21 (FREQ 4) | Controls the Frequency parameter of band 8, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 22 (Q 4) | Controls the Q factor of band 8, if a Channel or Linear Phase EQ is inserted. | ||||||||||
Encoder 24 (PAN) | Controls Pan/Balance (of mono or stereo channels). | ||||||||||
Download the guides:
Logic Pro User Guide: Apple Books | PDF
Logic Pro Instruments: Apple Books | PDF
Logic Pro Effects: Apple Books | PDF
Control Surfaces Support Guide: Apple Books | PDF