Use the Beat Sequencer in GarageBand for iPhone

• Tap the Browser button , swipe to Drums, then tap the Beat Sequencer button.

The Beat Sequencer comes with many drum patterns that you can change and save.

• Tap the Patterns button under the Beat Sequencer, then tap a pattern shown in the list.

• Tap the Navigation button in the control bar, tap the Sounds button, then tap the drum kit you want to play. You can also swipe left or right on the Sounds button to change to the previous or next drum kit.

  

• Play the Beat Sequencer by itself: Tap the Start/Stop button in the Beat Sequencer.

• Play the Beat Sequencer along with recorded tracks: Tap the Play button in the control bar.

• Tap the Step On/Off button under the grid and then do any of the following:

  • Tap a step to turn it on or off.

  • Drag across the grid in any direction to turn multiple steps on or off.

  • Tap a row header to open the Row Settings, then tap Randomise Step On/Off to turn on random steps for that row.

You can change the volume and attack of steps by adjusting their velocity.

• Tap the Step Settings button , tap Velocity, then do any of the following:

  • Drag up or down on a step to raise or lower the velocity.

  • Touch and hold a step to see an expanded view, then drag up or down.

  • Drag left or right to change the velocity for multiple steps.

  • Tap a row header to open the Row Settings, then tap Randomise Velocity to create random values for that row.

You can set the note to repeat in each step to create effects like snare rolls and double hits.

• Tap the Step Settings button , tap Note Repeat, then do any of the following:

  • Drag up or down on a step to raise or lower the number of repeats.

  • Touch and hold a step to see an expanded view, then drag up or down.

  • Drag left or right to change the number of repeats for multiple steps.

  • Tap a row header to open the Row Settings, then tap Randomise Note Repeat to create random values for that row.

Using the Chance value, you can add variations to your drum patterns so they sound a bit different each time they repeat. The Chance value of a step determines the probability of whether or not a step is played when lit.

• Tap the Step Settings button , tap Chance, then do any of the following:

  • Drag up or down on a step to raise or lower the probability.

  • Touch and hold a step to see an expanded view, then drag up or down.

  • Drag left or right to change the probability for multiple steps.

  • Tap a row header to open the Row Settings, then tap Randomise Chance to create random values for that row.

• Tap the Step Settings button , tap Loop Start/End, then do either of the following:

  • Drag the handle on the left or right edge of the loop to change its start or end point.

  • Tap a row header to open the Row Settings, then tap Randomise Loop Start/End to create random start and end points for that row.

You can change which kit piece a row plays.

1. Tap the row header to open the Row Settings, then tap Kit Piece.

2. Tap the play button in the list to preview the kit piece.

3. Tap the name of the kit piece to select it for that row.

4. When you finish, tap the row header to close the Row Settings.

• Tap the Dice button at the bottom of the grid.

  You can tap the Dice button multiple times to try out different drum patterns.

1. Modify an existing drum pattern or create your own.

2. Tap the Patterns button under the Beat Sequencer, then tap Save.

3. Type a name for your custom drum pattern, then tap Done.

   The first time you save a custom drum pattern, a new Custom category appears, with an icon for your drum pattern. You can rename or delete the drum pattern by tapping Edit, then tapping the icon (to rename the sound) or the red circle (to delete the sound).

• Tap the Inspector button , tap Length, then tap the number of steps for the drum pattern.

If your drum pattern is longer than 16 steps, an overview of each section appears above the grid.

• Tap the section at the top of the grid to select which one you want to view and edit.

• Tap the Inspector button , tap swing, then choose a swing value from the list.

1. Touch and hold the icon of the row you want to reorder.

   The row dims to indicate that it can be moved.

2. Drag the dimmed row up or down to move it to a new position in the grid.

• Add a row: Drag the row header up, tap the Add Row button , then tap a kit piece for the row.

• Delete a row: Tap the icon for the row you want to delete, then tap Delete.

• Drag the row header to the right and do one of the following:

  • Mute the row: Tap the Mute button .

  • Solo the row: Tap the Solo button .

The playback mode determines the order in which steps are played. You can change the playback mode for the whole drum pattern or for each row.

• For the whole drum pattern: Tap the Inspector button , tap Playback Mode, then choose a playback mode from the list. Tap the Inspector button when you are done.

• For a row: Tap the row header for the row you want to change, tap Playback Mode, then choose a playback mode from the list. Tap the row header when you are done.

By changing the playback mode, you can create interesting and dynamic rhythms. You can choose from four modes:

• Forward: The pattern plays from left to right, to the end of the loop, and then repeats.

• Reverse: The pattern plays from right to left, to the end of the loop, and then repeats.

• Ping pong: The pattern plays back and forth, first from left to right, then from right to left.

• Random: The steps in the pattern are played randomly.

• Tap the Inspector button , tap Clear Pattern, then tap Clear.

After you create a drum pattern, you can record it to use in the song.

1. Tap the Record button in the control bar.

2. If you turn steps in the grid on or off, or change their settings, your changes are recorded as part of the pattern.

3. When you finish, tap the Play button in the control bar to stop recording.

After you record your pattern, it appears as a region in Tracks view.