Apple Vision Pro User Guide
- Welcome
- Let others use your Apple Vision Pro
-
- Capture
- Clock
- Encounter Dinosaurs
- Mindfulness
- Numbers
- Pages
- Shazam
- Shortcuts
- Tips
-
- Use built-in privacy and security protections
- Keep your Apple ID secure
-
- Sign in with passkeys
- Sign in with Apple
- Automatically fill in strong passwords
- Change weak or compromised passwords
- View your passwords and related information
- Use shared password groups
- Share passkeys and passwords securely with AirDrop
- Make your passkeys and passwords available on all your devices
- Automatically fill in verification codes
- Sign in with fewer CAPTCHA challenges on Apple Vision Pro
- Manage two-factor authentication for your Apple ID
- Create and manage Hide My Email addresses
- Protect your web browsing with iCloud Private Relay
- Use a private network address
- Use Contact Key Verification on Apple Vision Pro
- Copyright
Attach or remove the Apple Vision Pro Light Seal or head band
The Light Seal, Light Seal Cushion, Solo Knit Band, and Dual Loop Band are detachable, so you can take them off for cleaning, or if you want to use a different size Light Seal, Light Seal Cushion, or head band.
Attach or remove the Light Seal and Light Seal Cushion
Put on the cover to protect Apple Vision Pro, then make sure your Apple Vision Pro is sitting on a stable surface, like a table or desk.
To prevent scratches and cracks, don’t place Apple Vision Pro with the glass facing down.
Do any of the following:
Attach the Light Seal: Align the Light Seal with the frame, with the Light Seal Cushion facing out (so it touches your face when you put it on). You should feel the Light Seal magnetically attach to the frame.
Attach the Light Seal Cushion: Align the Light Seal Cushion with the Light Seal, with the Light Seal Cushion facing out (so it touches your face when you put it on). You should feel the Light Seal Cushion magnetically attach to the Light Seal.
Remove the Light Seal: Gently pull on the Light Seal until it disconnects from the frame.
Remove the Light Seal Cushion: Gently pull on the Light Seal Cushion until it disconnects from the Light Seal.
Attach or remove the head band
Put on the cover to protect Apple Vision Pro, then make sure your Apple Vision Pro is sitting on a secure surface, like a table or desk.
To prevent scratches and cracks, don’t place Apple Vision Pro with the glass facing down.
Do any of the following:
Attach the Solo Knit Band: Align the connector on either side of the Solo Knit Band with the connector on the inside of each Audio Strap (with the orange release tab facing inwards), then push in until you hear a click.
You may need to pull the orange release tab as you put the connector in place, then release when it’s attached.
Attach the Dual Loop Band: Make sure the size indicator is positioned on the left, with the upper strap pointing directly upwards and the lower strap oriented to go around the lower part of your head. Then align the connector on either side of the Dual Loop Band with the connector on the inside of each Audio Strap, then push in until you hear a click. Make sure to loosen the straps before putting on Apple Vision Pro.
Detach the head band: Pull the orange release tabs on the inside of the head band until it disconnects from the device.
Note: Before putting on Apple Vision Pro, gently pull the connection points for the head band to ensure they’re attached properly.