Use hearing devices with your Mac
You can pair Made for iPhone (MFi) hearing aids or sound processors directly to your Mac to stream audio and adjust their settings.
Note: Made for iPhone hearing devices can be paired only with select Mac computers with the M1 chip, and all Mac computers with the M2 or M3 chip. For a list of supported hearing devices and more information about Mac system requirements, see the Apple Support article List of Made for iPhone hearing devices.
Pair hearing devices with your Mac
Before you begin, make sure your hearing devices are charged and within range of your Mac. If your hearing devices are already paired to another nearby device, such as an iPhone or iPad, make sure Bluetooth® is turned off on those devices. (When you finish pairing your hearing devices to your Mac, you can turn Bluetooth on again on those devices.)
On your Mac, choose Apple menu
in the sidebar, then click Hearing Devices. (You may need to scroll down.)If prompted, turn on Bluetooth.
Power your hearing devices off and back on again.
If you’re not sure how to power off your hearing devices, refer to the instructions that came with them, or check with the audiologist who helped you set them up.
When your hearing devices appear in the list of available devices, move the pointer over them, then click Connect.
Pairing can take as long as 60 seconds—don’t try to stream audio or otherwise use the hearing devices until pairing is finished. When pairing is finished, you hear a series of beeps and a tone.
You need to pair your devices with your Mac only one time. After that, your hearing devices automatically reconnect to your Mac whenever they are on and in range.
Stream audio from your Mac to your hearing devices
You can stream audio from your Mac to your hearing devices.
Click the Sound module
in the menu bar, or click Control Center 
in the menu bar, then click the Sound module.If you don’t see the Sound module in the menu bar, you can add it. Choose Apple menu
in the sidebar, go to Sound, then choose Always Show in Menu Bar. (You may need to scroll down.)Below Output, click the name of your hearing device.
View the status of your hearing devices and adjust their settings
You can view the status of your hearing devices, such as connection and battery level, and adjust settings like microphone level.
In System Settings: Choose Apple menu
From the desktop: Click the Hearing module
in the menu bar, or click Control Center in the menu bar, then click the Hearing module.If you don’t see the Hearing module, you can add it. Choose Apple menu
For information about the available settings, see Change Hearing Devices settings for accessibility.
Unpair hearing devices from your Mac
On your Mac, choose Apple menu
Click “Forget this device,” then click Forget.