Set aggregate device settings in Audio MIDI Setup on Mac

All devices in the aggregate device need to have the same sample rate. The sample rate of each device should match the sample rate of the device chosen from the Clock Source pop-up menu.

1. In the Audio MIDI Set-up app on your Mac, click the disclosure triangle next to the name of your aggregate device in the sidebar.

2. Above your aggregate device, select one of the devices that’s used in your aggregate device.

3. In the right side of the window, click the Format pop-up menu, then choose the sample rate and bit depth for the device you selected.

4. Repeat steps 2 and 3 for each device used in the aggregate device, choosing the same sample rate and bit depth for each device.

If the devices in your aggregate device aren’t synchronised using hardware, you need to enable drift correction, also known as resampling, to compensate for drift in the data between devices.

1. In the Audio MIDI Setup app on your Mac, select the aggregate device in the list.

2. Choose your aggregate device settings.

   • If all of the devices in the aggregate device aren’t synchronised through hardware, click Clock Source, then choose the device with the most reliable clock. Then select the Drift Correction checkbox for each device.

   • If some of the devices in the aggregate device are synchronised through hardware, click Clock Source, then choose the hardware synchronisation’s clock master. Then select the Drift Correction checkbox for each device that isn’t synchronised through hardware.

   • If all of the devices in the aggregate device are synchronised through hardware, click Clock Source, then choose the hardware synchronisation’s clock master. Make sure none of the Drift Correction checkboxes are selected.