
Record in Quick Sampler in MainStage
You can use Quick Sampler to record the signal from any audio input.

Quick Sampler Recorder mode parameters
Record button: Click to start and stop recording.
Input pop-up menu: Choose the audio input source.
Monitor button: Turn on to hear the incoming signal.
Tip: Take care with levels to avoid audio feedback.
Record Start pop-up menu: Choose to start recording immediately when the Record button is pressed or when the signal reaches the defined threshold level.
Note: If “Wait for signal to pass Threshold” is chosen in the Record Start pop-up menu, recording won’t start until the Record button is clicked.
Level meter: Shows the input signal level.
Level meter slider: Set the threshold level for the input signal.
Record audio in Quick Sampler
In MainStage, choose an input from the Input pop-up menu.
Click the Record button.
Choose the Record Start pop-up menu option you want to use.
To begin recording when you click the Record button, choose “Start immediately.”
To begin recording when a defined level is reached, choose “Wait for signal to pass Threshold.”
To hear the incoming audio signal, turn on the Monitor button.
Tip: Take care with levels to avoid audio feedback.
If you chose “Wait for signal to pass Threshold” in the Record Start pop-up menu, keep an eye on the level meter to set the level meter slider value.
Press the Record button to begin recording.
Press the Record button again to stop recording.