Ringshifter delay parameters in MainStage
The effect signal is routed through a delay, following the oscillator.
Delay parameters
Time knob and field: Set the delay time. You can choose from: hertz values, when running freely, or note values, including triplet and dotted notes, when the Sync button is active.
Sync button: Synchronize the delay with the project tempo. You can choose musical note values with the Time knob.
Level knob and field: Set the level of the delay added to the ring-modulated or frequency-shifted signal. A Level value of 0 passes the effect signal directly to the output (bypass).
Delay Low/High Cut sliders and fields: Click the disclosure arrow at the lower left of the interface to access these extended parameters. Cut frequencies below the Low Cut value and above the High Cut value to shape the sound of delay repeats with highpass and lowpass filters. The filters are located in the feedback circuit, which means that the filtering effect increases in intensity with each delay repeat. If you want an increasingly muddy and confused tone, move the High Cut slider toward the left. For ever thinner echoes, move the Low Cut slider toward the right.