Logic Pro for Mac release notes

Learn about the enhancements and improvements in the most recent versions of Logic Pro for Mac.

Before updating Logic Pro for Mac, make sure to back up the currently installed version of the Logic Pro application and your Logic Pro projects.

New in Logic Pro 11.1.1

New features and enhancements

• Logic Pro can now import a two layer recording from Voice Memos as individual tracks.

Stability and reliability

• Resolves an issue where certain projects would hang when Option-clicking on a Track Stack disclosure triangle.

• Resolves an issue where Logic Pro would quit unexpectedly when bypassing control surfaces while the Key Commands window was open.

• Resolves an issue where Logic Pro would quit unexpectedly when replacing the minimum value in a Text Fader with a value larger than the previous maximum.

• Resolves an issue where Logic Pro would quit unexpectedly when rapidly changing synthesis modes in Sample Alchemy after preview playback.

• Logic Pro no longer quits unexpectedly when the Step Editor is opened with no region selected on a Mac with an Intel processor.

• Resolves an issue where Logic Pro could quit unexpectedly when turning on Hermode Tuning.

• Fixes an issue where Logic Pro could become unresponsive when the QRS plug-in window is open.

Mixer

• Plug-ins on Software Instrument tracks are now unloaded as expected when the Off button is activated.

• Duplicating a Software Instrument track with the Off button activated no longer loads its plug-ins.

• Projects saved with input monitoring buttons turned on will now open with the input monitoring state set to Off.

• When both the Record Enable and Input Monitoring buttons are enabled for an audio channel, existing regions on the track will not be audible, as expected.

Plug-ins

• The legacy Electric Piano and Tonewheel Organ software instruments now work correctly.

• Deleted default categories in Plug-in Manager no longer restore unexpectedly after Logic is relaunched.

• Adding a plug-in to the top level of the plug-in menu no longer causes the Amps & Pedals folder to be moved to the top level as well.

• Search for tracks in the Side Chain menu now correctly shows all relevant results.

Flex Time and Flex Pitch

• Join Regions now works as expected when Flex View is active on a track.

Automation

• Automation points are now properly created at region borders when Cut Section between Locators or Insert Section at Playhead are performed.

• Clicking on curves for Relative Pan or Relative Volume no longer causes them to jump to unexpected postions.

Track Stacks

• Performing Drum Replacement in nested Summing Stacks no longer causes tracks in the stack to be deleted.

Apple Loops

• Search in Untagged Loops now works correctly.

Environment

• Typed in values for text faders are now correctly retained when the Lower Range of the fader has been set to a value other than 0.

Control surfaces and MIDI controllers

• Restores the ability to learn a new controller assignment for a parameter that has been already assigned.

• The Channel Strip parameter assignment in the Controller Assignments Expert View now works correctly.

• Using Learn Assignment with Absolute controller messages from a MIDI device now learns the messages in Scaled mode, as expected.

General

• Show/Hide Colors no longer marks a project as edited.

• Long-clicking the Playhead no longer causes it to jump to an unexpected position.

Previous versions

Logic Pro 11.1

New features and enhancements

• With the new Quantec Room Simulator plug-in, add the legendary sound of the most acoustically accurate reverb ever created.

• Channel strips can now be re-ordered directly in the Mixer.

• Plug-ins can now be searched for and added with a Key Command.

• Beat Breaker now includes a Bypass Below control that you can automate to allow low frequencies to remain unprocessed.

• Sampler now offers a new command “Create Zones split at Transients.”

• Multi-track AAC files are now supported.

• The Input and Output assignment fields in the New Track Sheet are now searchable.

• Plug-ins or sends can now be easily removed from a channel strip in the Mixer by Command-clicking them.

• It is now possible to select multiple tracks along with regions using the Marquee tool.

• The Join Regions/Notes command now works on selected Flex Pitch notes.

• There is a new Record setting in the Track Inspector when Internal MIDI In is active that allows incoming MIDI to be recorded along with the internal MIDI.

• In Beat Breaker, the Time Graph is now shown in the background when the view is set to Volume mode.

• Performance is improved in projects with large Scores.

 Stability and reliability

• Resolves an issue where Logic Pro might quit unexpectedly when idle.

• Resolves an issue where Logic Pro might quit unexpectedly when using the Option key to duplicate a track.

• Resolves an issue where automating the Drive parameter for ChromaGlow on an audio track could cause Logic Pro to quit unexpectedly.

• Fixes an issue where opening a project from Recents while another project is open could cause Logic Pro to quit unexpectedly.

• Resolves an issue where Logic Pro might hang when quitting the app.

• Resolves an issue where creating MIDI from a Flexed audio region could cause Logic Pro to quit unexpectedly.

• Fixes an issue where creating a Smart Tempo Multiset from multiple Apple Loops could cause Logic Pro to quit unexpectedly.

• Resolves an issue where Logic Pro could quit unexpectedly when selecting a Pattern region after changing the length of another Pattern region on a different track.

• Resolves an issue where Logic Pro would quit unexpectedly when importing Aux channels from another project.

• Fixes an issue where adding a file with Japanese double-corner bracket characters in its filename to Quick Sampler could cause Logic Pro to quit unexpectedly.

• Resolves an issue that prevented certain projects saved in a previous version of Logic Pro from opening.

 Performance

• Performance is improved when switching track selection from a live Software Instrument track to a Folder Track Stack.

• Scrolling performance is improved with projects that contain one or more very long regions with Flex Pitch enabled.

• The progress bar when applying destructive edits in the Audio File Editor now indicates the progress of the operation more accurately.

• Fixes an issue where using The MIDI FX modulator plug-in with an AUv3 instrument could lead to an unexpectedly high CPU load.

• Performance is improved when selecting Flex-pitched notes in long audio files.

• Performance is improved when Scroll in Play is enabled.

• Tap-holding a tool in the Score during playback no longer prevents the screen from refreshing.

Accessibility

• The Swing and Fill amount knobs in the Session Players are now fully accessible using VoiceOver.

• VocieOver properly announces chord names in the Chord Track.

• The Tempo menu in the Drummer Editor is now accessible using VoiceOver.

• Using VoiceOver to close the Key Signature menu in the New Project window now closes the menu instead of the entire window.

• VoiceOver now reads out the playhead's new position after inserting notes with Step Input.

• Fixes an issue where deleting a region could unexpectedly move the VoiceOver cursor to the Track Header.

• VocieOver now announces Tempo changes made with the Tap Tempo button.

• VoiceOver can now be used to right-click open the contextual menu on a channel strip in the Mixer.

• VoiceOver now announces the positions of chords in the Chord Track.

• Single chords within a chord group can now be accessed using VoiceOver.

• The handles to adjust the left/right positions and lengths of chords are now accessible using VoiceOver.

• VoiceOver can now set the state of a track to “has focus.”

• Chords created using VocieOver are placed at the mouse-click position as expected.

• Scene trigger buttons in the Live Loops grid can now be activated using VoiceOver.

• Includes various improvements to VoiceOver support for Alchemy.

• VoiceOver now reads out the items in the Chord menu in Session Player editors.

• The names of demo projects are now read out correctly by VocieOver.

• VoiceOver now reads out the positions of chords in a chord group in the global Chord Track.

 Session Players

• Timing is improved with Session Bass Player performances that include slides.

• Bass Session Player regions that have been converted to MIDI regions no longer revert to Session Player regions when the project is re-opened.

• Resolves an issue where notes just outside the region border on Electronic Drummer tracks could cause individual drum hits to flam when the region is looped.

• Resolves an issue where using Pitchbend with the Studio Bass session player could cause scrape sounds to click.

• Includes improvements to the way Session Drummer handles odd time signatures.

• The Feel knob in the Drummer editor now works with all kit pieces.

• Fixes an issue where drummer regions with the Tempo control set to Automatic could switch off the region setting when a region is added that is not set to Automatic, and a new Drummer style is loaded.

• Option-clicking on the Complexity and Intensity sliders in the Session Player editors now resets them to their defaults, as expected.

• Hanging notes will no longer occur with Session Keyboard or Session Bass player when there are tempo changes at the end of an active cycle range.

• Resolves an issue where the Roots Brush Drummer snare could cut off unexpectedly when playing fills.

• Fixes an issue where creating a new region on a newly created Session Bass Player track after deleting the region created by default could create a Drummer region.

• Resolves an issue where the Create Region at Playhead command could create an unexpectedly very short region when used multiple times in succession on a Drummer track.

• The Feel knob in the Drummer Session Player editor now works consistently for all kit pieces.

• Session Bass Player performances that include slides are now tighter.

• Session Drummer regions set to play in half time or double time now start with a crash if the previous region in the track ends with fill.

 Studio Instruments

• Resolves an issue where playing many notes at once into the Studio Upright Bass could lead to hung MIDI notes.

• All articulations now work correctly when playing the Upright Bass instrument with Polyphonic voice mode enabled from a MIDI controller.

 Chord Track and chords

• The position of a chord added to the Global Chord track using the Add Chord button + now accounts for the current Snap setting.

• Fixes an issue where Opening an editor in the Main Window that hides the Chord Track could leave it impossible to view the Chord Track after the editor has been closed.

• A right-click in the Chord Track to create a new chord now places the created chord on the downbeat of the bar.

• Double-clicking a chord in an unselected chord group now immediately opens the Chord Picker.

• When pressing Tab after creating a chord, the length of the current chord is extended if a new chord name is not entered.

• Chords added with the Add Chord button + in the Chord Track are placed at the Playhead position as expected.

• Dragging the right border of the last chord in the Chord Track no longer changes the position of its left border.

• Chord track editing is improved in projects that start earlier than 1 1 1 1.

 Stem Splitter

• Using Stem Splitter on a region on the bottom track of a Summing Track Stack no longer routes the stack containing the stems to Stereo Out instead of the bus of the enclosing Track Stack.

• Stem Splitter now generates mono tracks when used on a mono source file.

• Stem Splitter now creates a single track when only one option is selected to be extracted.

 Spatial Audio

• Tracks converted to 3D objects in a Spatial Audio project now remain in sync as expected.

• Renderer Warping mode is now correctly preserved when importing ADM files.

• Software Instrument tracks now reliably play in sync in Spatial Audio projects.

• The Atmos plug-in now allows typed input for values for the Downmix and Trims controls in manual mode.

• Exported ADM files now include Auto Trim if it is enabled in the Atmos plug-in.

 Mastering Assistant

• The Mastering Assistant Loudness Compensation button now works as expected when a project that has been saved with it enabled is re-opened.

• There is now a setting to toggle “Show ‘Mastering Assistant’ Button in Stereo Output.”

Mixer

• The pre-fader setting now affects metering on Main Output channels.

• Fixes an issue where a soloed track that is also muted is could unexpectedly unmute when another track is unsoloed.

• Fixes an issue where tracks set to "No Output" could show an Input Monitoring button.

• The VCA fader for a newly created Folder Stack that reuses an existing VCA now immediately controls the volume of the stack, as expected.

• If multiple audio tracks are selected in the Track List, changing the input for one of them in the Mixer in Single Track mode will not also change the input of the other selected tracks in the Track List.

• The view in the Mixer now updates properly when the Mixer > View > Follow Hide setting is disabled.

• On Apple Silicon Macs, dragging or copying a 3rd party Audio Unit to a different slot in the Mixer no longer causes its window to unexpectedly open

• Resolves an issue where dragging a plug-in to a different position in a channel strip could cause its UI to close, and another plug-in UI to open.

• Choosing an Instrument track greater than 256 as side chain input now sets the correct track.

• The "Mute All" command no longer mutes Output or Master channel strips.

• Multi Output Software Instrument tracks in the Mixer now follow the order in the Track list as expected.

• Holding the Shift key now temporarily disables Group for a control on a channel strip.

 Sampler, Quick Sampler, and Quick Alchemy

• The Zone Per Note feature in Sampler now works as expected.

• Pressing the Play button in Quick Sampler now works immediately after loading a sample or Drum Machine Designer kit piece.

• Voices in the Sampler plug-ins play back as expected when their samples are a higher sample rate than the project sample rate.

• Moving the Trim Start/End marker while holding Option in Sample Alchemy now moves the entire selection.

• Pressing Shift while adjusting Filter Freq for FM and Comb PM filters now allows for fine adjustments in Sample Alchemy.

• There is now an option in Quick Sampler to export audio files.

• Sampler now offers an option to "Name Zones by Audio File Name" in the Zones Mapping editor.

• The Delete Slice Marker and Ignore Sensitivity commands in Quick Sampler are now available under the Gear menu.

• Fixes an issue where dragging loop handles while Sample Alchemy is in Record could create MIDI events.

• Sample Alchemy now includes a limiter.

• Resolves an issue where changing the audio file assigned to a Zone in Sampler could change the name of the Zone, if it was named for the original file.

• Duplicating or copy/pasting a Group in Sampler now duplicates the Zone content as well as the settings.

• Fixes an issue where cropping a sample in Sampler with a loop that starts at the beginning of the sample could lead to an unexpected crop, and a shift of the loop range to the right.

• Sampler now correctly reads the root key meta data from audio files.

• Waveform Position A/B/C/D are now available as Mod Matrix targets in Sample Alchemy.

• The option to adjust Loop settings in Sampler are now available in the Zones editor.

• Sampler now offers a command “Update Selected Zone(s) Info from Audio File".

• The Tab key now can be used to navigate between zones and groups in Sampler.

• Pressing Enter now directly allows text input to more easily rename items in Group or Zones in Sampler.

 Alchemy

• The Modulation arc in Alchemy now reliably shows the complete range.

• The Sample Tempo field now offers precision to two decimal places.

• The root note of unpitched samples imported into Alchemy is now set to C3 as expected.

• The Mod Rack now reliably shows the correct modulation when Arp is switched between "All" and "Source".

• Fixes an issue where the Master Glide knob could show a modulation arc when the knob is highlighted to add modulation.

• When importing an EXS instrument, Alchemy now reports any missing samples.

• Processing time when performing additive analysis is improved.

• Spectral Mask is now always disabled when importing audio files to Zones.

 Plug-ins

• Plug-ins inserted on Auxes recall the user-set Wet setting as expected when using Compare.

• Controls on ChromaGlow, Studio Pianos, and Studio Bass now respond immediately to mouse clicks when the plug-in window is not in focus.

• Plug-ins with a single Wet/Dry mix control now default to 100% wet when inserted on an Aux channel.

• Drag and drop from File Browser to most Audio Unit plug-ins that support drag and drop now works as expected.

• Dragging up on a Trackpad or with a scroll wheel now consistently moves all plug-in controls clockwise.

• Fixes an issue where the Vintage Tube EQ could output a DC offset of -30 dB when switching the output from Silky to Punchy.

• Resolves an issue where toggling the Low/High Cut filter on ChromaGlow could cause a loud click.

 Recording

• When punching in on an audio recording, the existing recording is now played back during the count-in, as expected.

• Resolves an issue where MIDI recordings made in Cycle mode, with the setting "merge" enabled could extend the region left to include an existing earlier region in the track and omit the newly recorded MIDI passes from the resulting region.

• There is a new Recording Setting to select between auto-record enabling the focused track, or all selected tracks when recording MIDI.

• When Auto Input Monitoring is enabled, input to record-armed tracks is no longer audible during playback, unless the Input Monitoring button for the track is also enabled.

 MIDI

• MIDI Tracks using Internal MIDI In now sync immediately with their source track when MIDI is played into them.

 Automation

• It is now possible to set multiple selected channels to Automation Trim mode

• Resolves an issue where Automation trim in the Track Header could stop working.

• Resolves an issue where Aux channels added to the Tracks Area could include automation lanes from the currently selected track.

• The automation lane in the Piano Roll now updates to reflect left corner position changes to the region after velocity has been scaled.

 Flex Time and Flex Pitch

• Flattening a Take folder with flexed comp segments on a track that's a member of a Quantize-locked edit group no longer leads to unexpected changes in length of the resulting regions.

• Resolves an issue where audio on flex-timed tracks that are members of a phase-locked edit group could shift position unexpectedly when the Q-reference button in the Track Header is activated.

 Smart Tempo

• The Smart Tempo editor now opens as expected when an audio file is selected after trying to open it with an Apple Loop selected.

• Fixes an issue where Tempo Analysis always detects a constant tempo when running Logic Pro in Rosetta mode.

• SMPTE-locked markers now immediately move to the correct beat position when Tempo events are edited.

• The metronome in the Smart Tempo editor now properly plays back time signature changes with Downmix files.

• Resolves an issue where adjusting a Smart Tempo Marker during playback could cause playback to jump to the beginning of the region.

 Live Loops

• The Scroll to Selection command now works in the Live Loops grid.

• Resolves an issue where the Queue Cells key command could incorrectly trigger a “Command Not Available Because the Selected Cells are Muted” error when the selected cells are not muted.

• MIDI input to other tracks is now audible when recording into a Live Loops cell.

• MIDI Loops in the Live Loops grid now update as expected when the project key is changed.

 Step Sequencer

• Inspector tabs in Step Sequencer now have individual heights, to improve visibility of parameters when scrolling.

• Fixes an issue where subrows in Step Sequencer could unexpectedly shift position when grabbed with mouse for repositioning.

• When previewing a Pattern Region on the top level of a Track Stack that has rows assigned to output to different sub-tracks on different MIDI channels, the Preview in Step Sequencer now honors the MIDI channel assignments of the rows.

Takes and comping

• Resolves an issue where the current comp in a Take Folder could unexpectedly reset to the most recent take.

• Resolves an issue where the Pack Take Folder option could unexpectedly display for Session Player regions.

• Comp segments from imported Take folders can now be moved in projects that start before 1 1 1 1.

 Track Stacks

• Changes to the color of a Track Stack are now immediately visible.

• Multitimbral Instrument tracks within a Track Stack are no longer converted to independent tracks in a duplicate created from the Track Stack.

• Resolves an issue where dragging from a track within a Track Stack to the area beneath all existing tracks could unexpectedly nest the new track within the Track Stack.

• Keyboard arrow keys can now be used to choose between the Folder Stack and Summing Stack options when creating a Track Stack

 Export and bounce

• The Project Name Element in the Export All Tracks as Audio Files dialog now updates to the new name of a renamed project.

• Enabling a file format in the Bounce window now automatically highlights the file type, to show the details for the format.

• It is now possible to bounce multiple regions in place per track at once.

 Import

• Logic Pro no longer displays a “File does not exist” alert when importing ADM files that contain split stereo audio files.

 Apple Loops

• Search in the Loop Browser now works in column view.

• Adding an Apple Loop to an empty project that has chords in the Chord Track no longer changes the project key signature.

• Loop export now shows all possible key signatures when adding a loop to the Loop Library.

• When the Play in Project Key setting in the Loop Browser is enabled, previews for Apple Loops now play as expected in their original key if project playback is stopped.

 Global Tracks

• Fixes an issue where adding an Arrangement Marker with the + button in the Track Header could cause the Marker Track to be unhidden.

• Text formatting is now preserved when copy/pasting from one Marker to another.

 Project Templates

• Saving a project that contains multiple Project Alternatives as a Template now removes all but the currently active alternative, as expected.

 Sound Library

• Step Sequencer pattern regions now load from Search in the Sound Library as expected.

 Key Commands

• Resolves an issue where the Automation Value Nudge Up/Down commands could nudge by twice the expected value when the Chord Track is displayed.

• The Close Window key command no longer closes open plug-in windows as well as the focused window.

• The “Open/Close Instrument Plug-in of Focused Track” key command now opens the correct instrument plug-in as expected when used in the Score window.

• The Loop On/Off key command no longer sets the Region default to Loop when no region is selected.

• The various Nudge key commands now also apply to Marquee selections.

• The “Split Regions/Events at Rounded Playhead Position” key command now works as expected.

• There is now a new “Delete unused Track Alternatives” key command.

• Resolves an issue where Track header color bars could be unexpectedly shown when the Color Tracks by Region/Cell command is used.

• Fixes an issue where the Repeat Notes key command could unexpectedly restore a shortened region to its original length.

• There is now a key command to extend a selected audio region's start or end to the current Playhead position.

• There are now Key Commands for “Previous/Next Setting for Linked Plug-in Window.”

• Fixes an issue where opening the Library pane could unexpectedly block some key commands from working.

 Logic Remote

• Fixes an issue where violins performed from Logic Remote Chord Strips using the Smart Strings instrument in Pizzicato mode could play legato.

• The double bass sound now triggers as expected for all chords triggered in the Smart Strings instrument from Chord Strips in Logic Remote.

• Resolves an issue where swiping on the “Bdim” Chord Strip in Logic Remote with the Smart Strings instrument could cause hung notes.

 Control surfaces and MIDI Controllers

• It is now possible to assign the 3D Object Panner "Size" parameter to a control on Mackie Control

• There is now a setting to determine whether selecting a track on a control surface opens a plug-in window.

• Track names now display as expected in the Softube Console 1.

• MIDI Device scripts that use CC32 now work properly when MIDI 2.0 is enabled.

 Undo

• Resolves an issue where performing Undo after punching in with the Recording Setting Content Erase and Replace Mode enabled could delete the region rather than undoing the recording.

• Fixes an issue where using Undo after creating a new track could cause an Ultrabeat track in the project to lose or change its loaded preset.

• Resolves an issue where using Undo after starting a MIDI recording over multiple existing regions with the Overlapping Recordings setting set to Merge could unexpectedly merge the two existing regions if recording was stopped before any MIDI was played.

• Notes in audio takes that have been flex pitched now sound at their original pitches after Undo is performed.

• Touching a Volume fader without changing its value no longer creates an Undo step.

• Undo now works as expected after using Perform Again in a Session Player editor.

• The Regenerate command from the Edit Context menu of Session Player regions now creates an Undo step.

 Score

• The Score now displays chord text, chord grids and text objects in the looped iterations of regions

• Resolves an issue where the Set Locators by Region key command could unexpectedly create a Skip Cycle at -9 1 1 1 when the Score Editor has focus and the selected region is at a position other than 1 1 1 1.

• Resolves an issue where the Score Editor could unexpectedly display a staff when open with an audio Apple Loop selected.

• Performing edits in the Score no longer causes all Session Player regions to regenerate.

• Clicking and dragging a selection of notes in the Score now selects all notes dragged over as expected.

• When the language in the Chords & Grids project settings is set to “Roman (Do, Re, Mi, Si…),” “Si” chords no longer incorrectly display as “Ti” in the LCD key signature menu, the Loop Browser, and in chord grids.

 Editing

• The “Set Region/Event/Marquee Start to Playhead position” command now works as expected with selected notes in the Piano Roll in regions with a start time before 1 1 1 1.

• The Playhead now consistently displays at the correct position in the Piano Roll when a MIDI Take Folder is opened and closed.

• Resolves and issue where copy/pasting notes in the Piano Roll would extend a shortened region to its original size.

• Notes selected in the Piano Roll now play with their actual Release Velocity value, rather than a value of 64.

• Resolves an issue where the “No track selected for editing in Editor” error could be displayed when double-clicking an audio region to open the Audio Track Editor.

• Resolves an issue where the view in the Audio Track Editor could scroll unexpectedly when starting and stopping solo playback in the editor.

• Resolves an issue where clicked notes in the Piano Roll could sound unexpectedly shortened.

• Releasing the Shift key after using it to limit the Brush Tool in the Piano Roll to horizontal operation now returns the tool to both horizontal and vertical operation.

• Audio Apple Loops dragged to a track now display correctly in the Event List after a different audio region has been selected and then the Apple Loop is selected again, with Content Link enabled.

• Fixes an issue where the Rotate tool could include events outside the region border.

• The Event List now immediately updates to show the result of using the Delete MIDI Events Outside Region Borders key command.

• There are now view options in the Event List to show the creation date, and last modified date for regions.

• The Velocity slider in the Piano Roll works as expected on selected notes in cases where Link mode is off, and the region being edited is not currently selected.

• The Vertical 5 style fader in the Environment now fades as expected.

• Resolves an issue in which the Info Popover for a note in the Piano Roll could cover the note.

• In the Environment, Vector Faders in nested Macros now work as expected.

• The "Toggle Zoom to fit Selection or All Contents" command now works correctly in the Piano Roll with projects that start earlier than 1 1 1 1.

• The SysEx editor for faders in the Environment now shows all text as expected.

 General

• New Software Instrument tracks now use the default settings defined in the New Track Sheet.

• Assigning track color to multiple selected tracks now works correctly when there are regions on some of the tracks.

• There are now independently stored Nudge settings for Musical Grid enabled and disabled.

• Resolves an issue where changing the delay setting in Ticks mode could also changes the saved setting in ms mode.

• Zooming behavior in the Tracks Area using a track pad has been improved.

• The green "+" glyph now displays as expected when Option-dragging regions in the Tracks Area.

• It's now easier to use the Length tool with Flex Pitch notes in the Tracks area.

• Resolves an issue when the selected track is out of view, and activating Input Monitoring on another track could cause the view to scroll to the selected track.

• Dragging a region past the Project End marker no longer causes the view to scroll to its new position.

• The last note in a region now plays all the way to the region end when the region Gate Time parameter is set to "Legato".

• The LCD can now be configured to show the I/O Buffer Size control.

• Resolves an issue where right-clicking an unselected marker to delete it could unexpectedly delete a selected marker instead.

• When replacing a custom icon with another, the new icon now immediately shows up in the Custom Icon picker.

• Fixes an issue where clicking and holding a track header with Option pressed could unexpectedly create a duplicate track with content.

• Logic Pro projects now have larger, scrollable QuickLook previews.

• Fixes an issue where tapping a key on an iPad used as an additional display in Sidecar mode could always toggle the Automation View.

• Swipe to delete markers in the Marker list now works with Magic Mouse and Magic Trackpad.

• When the Auto option is used when using the Repeat command on regions, the new regions are now placed at bar/beat positions rather than simply at the end of the selected region.

• Resolves an issue where activating “Show Event Position and Length as Time” in the Marker editor could cause unexpected scrolling in the Tracks area.

• Resolves an issue where toggling “Show/Hide All Inactive Track Alternatives” could scroll the selected track out of view with large vertical zoom settings.

• Resolves an issue where drawing a vertical rectangle with the Zoom tool in the MIDI Draw area of the Piano Roll could unexpectedly zoom horizontally as well as vertically.

• The focused track now reliably remains in view when Automation view is toggled on.

• The tooltip on the Duplicate Tracks button now updates to show functions available when pressing modifier keys.

• Selected automation points are now kept in view when zooming.

• “Play from Selected” now works when a marker is selected and the Mixer has focus.

• Audio files and loops dragged into the Tracks area now snap to the current Snap setting as expected.

• All Project settings for the Metronome now show labels when the Enable Complete Features setting is disabled.

• Fixes an issue where renaming a region on a track that is not currently selected could cause the view to scroll to the selected track.

• The locators are now set correctly when the “Set Rounded Locators and Enable Cycle” command is used in a project that does not start at 1 1 1 1.

• Marquee selection in the Tracks Area now works as expected after using key commands to navigate in the Track header.

• Selection of tracks is now performed on mouse-down rather than mouse-up.

• “Instrument without MIDI Thru Function” can now be enabled for tracks using an External Instrument.

• Resolves an issue where the playhead could move unexpectedly to the rightmost side of the visible area when using the Forward or Reverse key commands.

• The LCD now displays MIDI output to external instruments when MIDI 2.0 is enabled.

• Tracks created by dragging an Apple Loop into the Tracks area now get focus as expected.

• When rubber-bad selecting regions while dragging in the forward direction, the Region Inspector updates to show the current selection of regions while dragging.

Logic Pro 11.0.1

Performance

• Launch time when running Logic Pro in Rosetta is greatly reduced.

• Performance is improved when working in Logic Pro while downloading content.

• Auditioning an audio file in the Files browser no longer causes Logic Pro to calculate file overviews, blocking interaction with the app in the interim.

• Fixes an issue where Logic Pro could sometimes show unexpected “Disk is too slow” messages when bouncing regions.

Stability and reliability

• Fixes an issue where Logic Pro could quit unexpectedly when opening certain Logic 5 projects.

• Dragging an audio region into the Chord Track area no longer causes Logic Pro to quit unexpectedly.

• Resolves an issue where Logic Pro could quit unexpectedly when the Repeat Once command is used.

• Improves performance and stability with the Studio Bass Player instrument by automatically enabling Virtual Memory in cases where it is not enabled.

• Fixes an issue where Logic Pro could quit unexpectedly when previewing Untagged Loops in the Loop Browser.

Compatibility

• Existing projects with Transposition events now retain the Transposition track when opened in Logic Pro 11.0.1 as expected.

Session Players

• Session Player regions now regenerate immediately when a Chord Group is adjusted in the Inspector.

• Resolves an issue in which adding a new Session Player region to a Session Bass track might unexpectedly create a Drummer region.

• Resolves an issue in which the left hand of the Session Piano Player might not play as expected with the current settings.

• Resolves an issue where Bass Session Player regions that have been converted to MIDI could revert to Session Player regions after saving and reopening the project.

• Fixes an issue where regions on a Session Drummer track using the "Roots Songwriter" style could be silent when certain Time Signatures are used.

Plug-ins

• Resolves an issue in Scripter that caused all Program Change events to be sent as Program Change 0.

• Half Sustain pedal positions now work as expected in the Studio Piano instrument.

• The Studio Bass instrument no longer outputs hiss when the Hum and Hiss slider are set to the lowest value.

• Resolves an issue in which using a continuous damper pedal with Studio Piano might cause hanging notes.

Spatial Audio

• Downmix and Trim settings are now correctly exported to ADM files.

Automation

• The Cut Time command now shifts Track Based Automation correctly.

Export and bounce

• Bouncing a folder in place no longer places the bounced region 1 bar to the left of the original position.

Live Loops

• Pattern Loops dragged to Live Loops cells now transpose as expected.

MIDI

• It is now possible to edit LSB messages for Bank Change in the Event List when MIDI 2.0 is enabled.

Undo

• Undo now works correctly if the Smart Tempo Editor is closed and then reopened after performing a Beat Marker edit.

General

• Play from Selection with a Marker selected now plays from the correct position in projects that start earlier than 1 1 1 1.

• Fixes an issue where using Option-drag to copy a region into a new track pastes audio that was copied into the clipboard from another app.

• Deleting a Marquee selection of a newly recorded audio region no longer ask if you want delete the entire file.

Logic Pro 11.0

New Features and enhancements

• New AI-enhanced tools join Smart Tempo and the Pitch Correction plug-in to augment your artistry.

• Bass Player and Keyboard Player join Drummer to complete a set of Session Players — all built with AI making it easy to create performances that respond to your direction.

• Session Players can follow the same chord progression using Global chord track.

• Add warmth to any track with ChromaGlow, an advanced plug-in with five saturation models designed to simulate the sound of vintage analog hardware.*

• Use Stem Splitter to separate a stereo audio file into stems for vocals, drums, bass and other parts.*

• Session Players, ChromaGlow, and Stem Splitter also come to Logic Pro for iPad 2 — making it simple to move between projects created in Logic Pro for Mac.

• Play any of six deeply-sampled acoustic and electric basses with Studio Bass.

• Perform any of three meticulously-sampled pianos with Studio Piano.

• Loops that contain chord tags will automatically populate the chord track when added to a project.

• Three new Producer Packs are available: Hardwell, The Kount, and Cory Wong.

• Original multi-track project of Swing! by Ellie Dixon available as in-app demo song.

• Downmix and Trim options allow custom monitoring and mixing for non-7.1.4 configurations..

• User-edited Downmix and Trim parameters are now written into the ADM BWF file on export.

• Bounce in place adds automatic real-time recording for External Instrument regions or tracks that use external hardware using the Logic Pro I/O plug-in.

• Route MIDI signals generated by supported software instruments and effects to the input of other tracks for creative layering during playback or recording.

• Edit more efficiently using key commands for moving, extending, or resizing marquee selections.

• The Nudge Region/Event Position key commands now also nudge Marquee selections.

• The Transpose Region/Event key commands now also move or expand the Marquee selection up/down.

• Pattern regions can now be created on Drummer tracks, and Drummer regions can be converted to Pattern regions.

• New key commands include Trim Note End to Following Notes (Force Legato) With Overlap and Trim Note End to Selected (Force Legato) With Overlap.

• Bounce in Place and Track Freeze can now be performed in real time, allowing for use of external instruments, I/O plug-ins, and external inserts.

• Mastering Assistant analysis now can be performed in real time, allowing for use in projects that incorporate external I/O or instruments.

• Downmix and Trim settings are now imported when creating a new project from an ADM BWF file.

• The Recent Projects list can now be configured to show up to 50 projects.

Stability and reliability

• Scripts with 1071 characters or more in Scripter no longer cause Logic Pro to quit unexpectedly.

• Fixes an issue where creating a an event in a lane assigned to Note off in Step Sequencer could cause Logic Pro to quit unexpectedly.

• Fixes an issue where Logic Pro could fail to launch with an Error Initializing Core MIDI message when the system is under heavy load performing other tasks.

• Resolves an issue where Logic Pro could quit unexpectedly when a 64-bit floating point IR file is loaded into Space Designer.

• Fixes an issue where Logic Pro could stop responding when opening a project while the Project Settings > MIDI window is displayed.

• Logic Pro no longer quits unexpectedly when creating multiple Aux tracks with multiple existing Aux tracks selected.

• Improves stability when bypassing control surfaces with Musical Typing open when EuControl software is installed.

• Fixes an issue where Logic Pro could stop responding when quitting a project containing a large number of instances of Sampler.

• Fixes an issue where Logic Pro could quit unexpectedly when replacing a playing Live Loops cell with another loop.

Performance

• The UI is now more responsive when adjusting Flex Pitches directly on regions in Deviation mode.

• Performance is improved when editing Transient Markers in Take regions with Flex enabled.

• Performance is improved when making Flex Pitch edits in the Tracks area with a large number of selected regions.

• Alchemy's performance is improved.

• Performance is improved when moving regions in projects with a large number of tracks and regions.

• Projects containing a large number of flex-pitched regions now open more quickly.

• Resolves an issue where loading a project saved with a Summing stack selected that contains Software Instruments that have no regions or with the tracks turned off could load the Software Instruments into memory.

Accessibility

• VoiceOver now announces the state of Automation mode buttons on channel strips.

• VoiceOver now announces the status of the Pause button in the LCD.

• VoiceOver no longer announces hidden controls in the Smart Controls view.

• VoiceOver no longer reads the values of pan knobs that are currently hidden in Sends on Faders mode.

• VoiceOver now announces the state of the Details button and the Follow button in the Drummer Editor.

• VoiceOver now announces left-click and Command-click Tool selections in the Control Bar.

• VoiceOver now announces the name of the Time Quantize button in the Piano Roll.

• VoiceOver now announces changes in value when the Next/Previous key commands are used to change Quantize values.

• VoiceOver now announces state of key commands for Cycle, Mute, Track Solo, Input Monitoring, Track On/Off, and Lock/Unlock Track.

• VoiceOver now announces the selection state of focused tracks.

Spatial Audio

• Fixes an issue where adding a new 3D Object track for the first time to a Spatial Audio project could cause the Renderer to switch from the current model to the Apple renderer.

• The Dolby Atmos plug-in now offers a 5.1.2 monitoring option.

• Fixes an issue where setting a project to Dolby Atmos could output to 7.1.4 even when the mode defaults to Apple Renderer.

• It is now possible to monitor Dolby Atmos projects directly via HDMI to a surround capable receiver/amplifier.

• The metering for Height channels now shows as post-fader on the Master channel as expected.

• Loading a Master Bus channel strip setting in the 7.1.4 channel format now preserves the 7.1.4 channel layout as expected.

Session Players

• Resolves an issue where loading a user-created Drum Machine Designer patch could set the input to a bus and fail to load the Drum Machine Designer instrument.

• Using the Create Drummer Region command in a Marquee selection now creates a region that corresponds to the Marquee.

Smart Tempo

• In cases where there is not an existing Smart Tempo Multitrack Set, selecting an audio file in the Smart Tempo Multitrack Set window and disabling the “Contribute to analysis” checkbox now causes the Update button to change to Analyze as expected.

• Pressing the Space bar now immediately stops a Free Tempo recording.

• Fixes an issue where projects previously open in the same Logic Pro session could unexpectedly affect “Contribute to Analysis” in the Smart Tempo editor.

Recording

• Audio regions recorded to unnamed tracks now include the project name and track number in their name.

Mixer

• The channel strip Stereo Pan control and the Pan menu now can be adjusted when Caps Lock is enabled.

• Creating a single Multi-timbral Software Instrument in the New Track Sheet no longer creates two Software Instrument instances in the All view of the Mixer.

• Resolves an issue where remaining tracks in a Multitimbral Software Instrument Track Stack could unexpectedly rename the channel strip.

• Adjusting the activity status of a speaker in the Surround panner no longer causes the signal to unexpectedly mute.

• Groups now immediately show as inactive when switched off for a selected set of channels in the Mixer.

• Metering now correctly works on individual channel strips with plug-ins that send to more than two channels and are routed to a surround bus.

• Option-clicking on a send in a selected group of channel strips now sets all corresponding sends to 0 dB as expected.

• Fixes an issue where performing Undo after adjusting the fader values of grouped channels with Group Clutch enabled and then disabled could cause the faders to jump up to +6 dB when one member of the group is touched.

• Setting multiple selected channels to No VCA now works as expected

Alchemy

• The oscillator section in Alchemy offers a new Wide Unison mode.

• All controls for Additive Effects now accept typed-in values as expected.

• Values typed into parameters related to milliseconds (MS) in Acoustic Reverb are no longer interpreted as full seconds.

• Resolves an issue where performance control destinations for modulation could show as duplicated.

Sampler, Quick Sampler, and Quick Alchemy

• The Playback direction button in Quick Sampler now immediately updates when clicked.

• The view now scrolls correctly when dragging the Trim marker in Sample Alchemy.

• It is now possible to adjust the level of a group in Sampler up to +24 dB.

• The Up/Down buttons for navigating zones in Sampler now remain available after adjusting the start or end positions of samples.

• The general Zoom/Scroll key commands now can be used to trim the current view in Sample Alchemy.

• Handles and Trim Handles in Sample Alchemy behave correctly when click-dragged, even when the plug-in window does not have focus.

• The Ancient Vocal Chop and Baily Glide plug-in settings for Quick Sampler now open in Classic mode, as expected.

Plug-ins

• The MIDI Scripter plug-in now shows in Logic Pro when running in dark mode.

• Fixes an issue where clicking on Sampled IR in Space Designer could activate Synthesized IR mode unexpectedly.

• Resolves an issue where repositioning the playhead could cause audio to cut out on channel strips that use Step FX.

• The preset Note Repeater in Scripter now works as expected.

• The wet/dry setting on Ringshifter is now always set to 100% wet when inserted on an Aux.

• There's now a DI Delay Compensation switch in Bass Amp Designer to improve phase correlation when blending between Amp and Direct Box in the plug-in.

• StepFX now includes presets using Sidechain.

• The Beat Breaker preset called “Basic / 2 Slices, Speed 66%” no longer plays the slices at 50% speed instead of 66%.

• Resolves an issue where ES2 could produce glitching sounds when using Sine Level or Poly Voice mode on Apple Silicon computers.

• Mono > Stereo instances of Console EQ no longer can cause unexpected feedback.

• Using the Delete all Automation key command while an Audio Unit window has key focus no longer causes the Audio Unit window to go blank.

• The menu for the compression section of Phat FX can now be opened by clicking on the Up/Down arrows.

• Beat Breaker now offers new default patterns divided evenly into 2, 4, 8, 16, and 32 slices.

Mastering Assistant

• There is no longer unexpected latency with bounces from projects that use the Clean or Clean + Excite mode in Mastering Assistant.

• Mastering Assistant analysis is no longer incorrectly triggered in projects that contain no regions, but are previewing audio from Ultrabeat, etc.

• Mastering Assistant no longer allows the -1 dBFS peak limit to be exceeded in certain cases.

Automation

• The Consolidate Relative and Absolute for Visible / Automation menu item now only displays when automation types that support relative automation are active in the lane.

• Region-based Automation is now pasted as Track-based Automation when pasted to an area of a track that does not contain regions.

• Pitchbend now works as expected with zones in Sampler that do not have Flex Pitch enabled.

• Selecting Region-based automation points on a region now deselects previously selected automation points on other regions

• Disabling Region-Based Automation no longer dims the Power button for MIDI CC data lanes in the Piano Roll.

• The movie window now updates to show the correct frame when moving Region-based automation points.

• The Autoselect automation parameter now works as expected when clicking any plug-in control.

• Automation of the Gain plug-in no longer exhibits unexpected latency.

• Region-based automation is now drawn correctly when recorded into projects that start earlier than 1 1 1 1.

• Automation lane views for all tracks are now maintained when switching into Flex view and then back to Automation view.

Flex Time and Flex Pitch

• Flex Pitched notes now play as expected when clicked while Record or Input Monitoring is active on the track.

• Flexed audio tracks using Monophonic or Slicing mode no longer produce clicks at tempo changes.

Takes and comping

• Fade-ins are now applied when flatten and merge is performed on Comps.

• Renaming a take that encompasses the entire length of an audio file no longer unexpectedly changes the file name.

• Comps in Take Folders are now preserved when performing Cut Section Between Locators on a section that includes the end of one Take folder and the beginning of another, with a gap in-between.

Track Stacks

• Record-arming a Track Stack now arms grouped audio tracks in a Track Stack it contains.

• Dragging a subtrack out of a Track Stack that is assigned to a VCA now removes the assignment for the subtrack.

• Fixes an issue where Track Stacks could sometimes be dimmed when some, but not all, subtracks are muted or off.

• It's now possible to replace stacked instrument patches that are inside a Summing Stack with single track patches.

Track Alternatives

• Loading a patch on a Summing Stack containing sub-tracks with Track Alternatives no longer causes inactive alternatives to be deleted.

• Track Alternatives can now be created for the Stereo Output track.

Selection-Based Processing

• Using Selection-Based Processing on a Marquee selected section within a Take Folder no longer creates an unexpected comp.

• Selection-Based Processing on a comp now retains the comp.

Score

• The spacing of notes is improved in cases where there is a dotted note on a line with the stem is pointing upward.

• Command-Z to undo now works after deleting a Score Set.

• Upward bends in TAB staves now display correctly.

• Importing an instrument track no longer can cause Score Sets in the current project to disappear.

• Imported Score Sets can now be deleted from a project.

Live Loops

• “Join Region and Fill Cell” now works as expected.

• Recording a performance in Live Loops now temporarily puts all tracks into Automation: Latch mode.

• Fixes an issue where changing patches for a Live Loop track could cause the length of cells to change unexpectedly.

• It's now possible to paste MIDI notes into a Live Loops cell.

Step Sequencer

• It's now easier to use the disclosure triangle to open sub-rows in Step Sequencer.

• Pattern regions now play back correctly immediately after being nudged.

• Pattern Regions now immediately play as expected after using the Slip/Rotate tool to drag their contents to the left.

• The “Separate pattern region by kit piece” command on Drum Machine Designer tracks is now applied to the correct area of the Pattern Region, in cases where the left border of the region has been moved to the right.

• The Step Sequencer Inc/Dec controls now work in Loop Edit mode.

• Fixes an issue where Pattern Regions on frozen tracks be edited unexpectedly.

• Region-based automation now displays properly on Pattern regions in tracks that have been partially frozen, and on regions that have been frozen and then unfrozen.

• It's now possible to assign MIDI channels per step in a Pattern Region.

• Channel and Articulation IDs can now be set per step.

• Use the Recurrence Cycles and Recurrence Iteration step parameters to control how often a step plays.

MIDI

• Reset messages for Software Instruments now work correctly.

• Sustain messages are now sent correctly when playing back regions with Clip Length enabled in cycle mode.

• There is now an “Internal MIDI in” setting in the Track Inspector to allow for recording MIDI from any other software instrument or External MIDI Instrument track.

• The “Send all MIDI settings” key command now sends program changes to external devices assigned to empty tracks.

• Resolves an issue where 3 bytes of random MIDI data would be sent when playing back regions containing SysEx data with MIDI 2.0 disabled

• New “Internal MIDI in”

• feature allows recording of MIDI from other tracks, including MIDI FX plug-in output and 3rd party MIDI generators.

• The “Delete MIDI events outside region boundaries" key command now correctly creates a starting CC event in the region to match the last matching CC of the same type in the track.

• Fixes an issue where Chase could cut off notes that are preceded by notes of the same pitch on tracks with third-party instrument plug-ins.

Editing

• The Humanize transform set now works as expected when the Randomize functions for Position, Length, or Velocity are set to very small values.

• The menu item Delete and Move in the Event List is now only displayed if regions are displayed in the window.

• When MIDI 2.0 is selected in the Settings, clicking on an Event in the Event List no longer plays events back with MIDI 1.0 resolution.

• Fixes an issue where using the Cut command in the Audio Track Editor could switch the view to another editor.

• When a region in the Project Audio window is double-clicked, the Audio Track editor now opens as expected.

• The content link buttons for the Piano Roll and Score show the correct color as expected when toggled using the mouse.

• The Event List correctly updates to reflect changes made by using key commands to select notes in other editors.

• Resolves an issue where the Velocity tool in the Piano roll could affect the values of non-note events.

• Fixes an issue where applying the Transform set Double Speed could cause the notes to disappear from the Piano Roll.

Step Input

• Extending the length of note entered using Step Input now works correctly.

Global Tracks

• Adding multiple audio Apple Loops of the same key to different tracks of a new project now changes the project key as expected.

• Clicked in Tempo points are now placed at their correct positions in projects that start earlier than 1 1 1 1 .

Share and export

• When No Overlap is enabled, regions bounced onto existing regions no longer overlap them.

• Audio files bounced from Logic Pro now include the proper Encoded Date in the metadata.

• Fixes an issue where MIDI regions could be truncated when bounced in place.

• Fixes an issue where audio files including Volume/Pan automation exported from mono tracks that use plug-ins could export as stereo files.

• It is now possible to bounce sub-channels of multitimbral instrument tracks as individual files.

Import

• Resolves an issue when dragging multiple audio files into a project, choosing the “Place all files on one track” option could create a second track and places the first file on one track, and the rest on the second.

• Output channels in the Mixer can now be imported from other Logic Pro projects.

Apple Loops

• The Loops browser now correctly shows the same enharmonic key an Apple Loop was tagged with.

• Apple Loops now preview using the Key Signature active at the current position of the playhead.

• It's now possible to add Aliases to bookmarks and untagged loops.

• Dragging an Apple Loop from the loop browser to an existing track no longer changes the input for the track.

• Fixes an issue where MIDI Apple Loops could jump to the start of the nearest bar position when dragged from the Loop Browser to the middle of a bar.

Video Support

• A secondary screen that is running a full screen video with Show Animations off will no longer remain black after closing the project.

Key Commands

• The “Increase (or Decrease) last clicked parameter” key commands now work for controls in the LCD.

• The “Record off for all” key command now works on Software Instrument tracks in cases where one or more audio tracks are also record-enabled.

• There is now a key command to add to the current selection of regions or cells that are assigned to a toggle solo group.

• The Zoom Toggle key command now works in the Step Editor.

Compatibility

• GarageBand projects that use Pitch Correction now sound the same when opened in Logic Pro.

Undo

• If Undo is used immediately after creating a project, the New Track Sheet is displayed as expected rather than leaving a project with no tracks.

• Undo/Redo now works as expected with Audio Unit v3 plug-ins.

• Changing the Automation Mode, or changing a Track On/Off state now creates an Undo step.

• Performing Undo after adding a surround track no longer corrects Drummer tracks in the project.

Logic Remote

• Logic Remote immediately updates to show time and signature changes made in Logic Pro.

Control Surfaces and MIDI controllers

• Controls on Control Surface devices that use Lua scripts now provide feedback when learning assignments for them in Logic Pro.

• Illuminated buttons on control surfaces now show the correct state for Show/Hide Track Editor.

General

• The LCD now displays the Cycle start and end times in both SMPTE time and Bars/Beats when the secondary ruler is displayed.

• Search in the All Files browser now finds matching items in bookmarked folders.

• Fixes an issue where the visible editor in the Main window could unexpectedly switch when rubber-band selecting regions.

• Audio Take folders created in Cycle mode now loop as expected after recording when Loop is enabled in the Region Inspector.

• It's now possible to create external MIDI tracks when Core Audio is disabled in Logic Pro.

• Resolves an issue where deleting a Flex marker from an audio region while a Marker List is visible could switch the key focus to the Marker List.

• Track information pasted into a text editor now includes the TIME position when the Use Musical Grid setting for the project is not enabled.

• Input monitoring buttons are now displayed on audio tracks when Logic Pro has fallen back to an alternate audio device because the selected device is not available.

• Previewing an audio region in the Project Audio window no longer causes it to jump to the top of the window.

• Command-Option clicking on the On/Off button of a track now toggles the button for all tracks, as expected.

• Copy/paste of regions now works when Automation view is enabled.

• Right-clicking on a looped segment of a region now opens the contextual menu as expected.

• It's now easier to see when black keys are depressed in the Musical Typing window.

• The right arrow key now reliably moves the text cursor in the Bounce > Save As file name panel.

• Groove Templates created from audio regions now work in Smart Quantize mode.

• Dragging multiple regions from the same audio file from the Project Audio browser to the Tracks area now works correctly.

• Audio regions are no longer moved to unexpected positions when trimming, if absolute Snap mode is on and the region anchor is moved away from the start of the region.

• Fixes an issue where pasting a Marquee selection with No Overlap and Snap Edits to Zero Crossings mode enabled could delete a non-overlapping part of an existing region.

• Autozoom now triggers when a region's upper-right corner is dragged in the Main window, or the Audio Track Editor.

• The Playhead no longer may briefly appear to be in the wrong position when zooming horizontally.

• The Time Ruler now immediately updates to reflect changes made to the “Bar Position [bar position] plays at SMPTE” setting.

• The File browser correctly shows the full path when using Save As.

Learn more

• For previous Logic Pro release notes, see the following:

  • Logic Pro 10.8 release notes

  • Logic Pro 10.7 release notes

  • Logic Pro 10.6 release notes

  • Logic Pro 10.5 release notes

  • Logic Pro 10.4 release notes

  • Logic Pro 10.3 release notes

  • Logic Pro 10.2 release notes

  • Logic Pro 10.1 release notes

  • Logic Pro 10.0 release notes

• Logic Pro User Guide

• Logic Pro support