MXF presets in Compressor

Preset summary

The top section of the inspector displays the preset name and transcoding format used by Compressor, as well as an estimated output file size and a summary of video and audio properties. When you add a preset to a job or change the preset’s properties, this summary is automatically updated.

General Properties

• Name: Displays the name of the preset.

• Description: Displays the description of the preset.

• Extension: Displays the extension of the output file (.mxf).

• Allow export segmentation: Select this checkbox to have Compressor process the output file using available media engines or your shared computer group. Export segmentation requires macOS 14 or later and a Mac with Apple M1 Max, M1 Ultra, M2 Max, M2 Ultra, or M3 Ultra. For more on using shared computer groups, see Transcode batches with multiple computers using Compressor.

• Default location: Choose an item from the pop-up menu to set the default save location for transcoded files.

• Format: Use this pop-up menu to specify whether the output includes video and audio, or video only.

Retiming

Sets the processing algorithm used to adjust the frame rate during transcoding. Select one of the following options:

• Set to percent of source using: Modifies the output clip’s speed by a percentage of the source clip’s speed. Enter a value in the percentage field or choose a preset value from the adjacent pop-up menu (with a down arrow).

• Set to: Sets the duration of the clip. Enter a timecode duration in the field or click the arrows to increase or decrease the time.

• Set so source frames play at [frame rate] fps: Nondestructively changes the playback speed of the clip without discarding frames or creating new frames. This property has no effect unless the “Frame rate” value in the Video inspector is different from the source file’s frame rate. For example, if you add a 10-second source file with a frame rate of 24 fps to Compressor, set the “Frame rate” property in the Video inspector to 25 fps, and then select “Set so source frames play at 25 fps” in the General inspector, the resulting duration of the transcoded clip (at 25 fps) will be 9 seconds and 15 frames.

For more information, see Retime video and audio using Compressor.

Video Properties

• Frame size: Use the pop-up menu to set an automatically calculated frame size (resolution) for the output file. (Available options vary, depending on other presets in the Video Properties area.) See Intro to modifying frame size in Compressor.

• Center crop for output aspect ratio: Select this checkbox to ensure that when changing the aspect ratio in the Frame size pop-up menu, the video remains centered in the new aspect ratio.

• Pixel aspect ratio: Displays the ratio between the encoded width and the display width.

• Frame rate: Use this pop-up menu to set the playback rate (the number of images displayed per second) for the output file. See Retiming options in Compressor.

• Field order: Use the pop-up menu to set the output scanning method (either the field dominance or a conversion to progressive scanning). There are four options:

  • Automatic: Selects the most appropriate field order, based on the field order of the source and the capabilities of the selected codec.

  • Progressive: The video is displayed in complete frames with all lines sampled at the same instant in time.

  • Top First: The video is interlaced and displayed as two separate interleaved fields. The field containing the top line (even lines) is sampled at an earlier instant in time than the field containing the bottom line (odd lines). This field order is commonly used for high-definition video and standard-definition PAL video.

  • Bottom First: The video is interlaced and displayed as two separate interleaved fields. The field containing the bottom line (odd lines) is sampled at an earlier instant in time than the field containing the top line (even lines). This field order is commonly used for standard-definition NTSC video.

• Color space: Use this pop-up menu to convert the source media to a new color space. To have Compressor choose the best color space based on the applied preset, choose Automatic. (Depending on the compression method you choose, you may be able to transcode the video to wide color gamut. See Intro to wide color gamut and HDR.)

• RAW to log: Use this pop-up menu to select how ProRes RAW conversion is done. Choose Automatic to allow Compressor to choose the conversion method. You can also choose a manual preset to override the default. This option is available only if the source is ProRes RAW.

• Camera LUT: Use this pop-up menu to select the camera lookup table (LUT) applied to the source. Select a custom LUT to transform your video from one color space to another.

• Cinematic: Use this pop-up menu—available for video recorded in Cinematic mode with the iPhone Camera app—to specify how to handle Cinematic metadata (requires macOS 12 or later). There are two options:

  • Ignore: The Cinematic mode effect is not rendered in the output.

  • Render: The Cinematic mode effect is rendered in the output.

  Note: This menu is only visible if the video file you imported has Cinematic mode metadata. You may need to adjust certain settings to ensure the metadata is retained when you import the file. For more information, see the Motion User Guide.

• Stereoscopic: Use this pop-up menu—available for stereoscopic files or when you create a new stereoscopic preset—to choose how Compressor uses the left and right eye views in stereoscopic video:

  • Automatic: Automatically chooses a frame-packed or monoscopic output setting based on the source media. For monoscopic output, Compressor uses the hero eye if it can be determined from the file’s metadata; otherwise, the left eye is chosen.

  • Left Eye Monoscopic: Uses the left eye of the stereoscopic source to output a monoscopic video.

  • Right Eye Monoscopic: Uses the right eye of the stereoscopic source to output a monoscopic video.

• Codec: Use this pop-up menu to choose a transcoding method.

• Start timecode: Use this pop-up menu to set a forced timecode start point for the output file. The Automatic option uses the default timecode of the source file (typically, 00:00:00:00). Other options set the timecode start to 1 hour or 10 hours.

• Drop frame: Available when “Frame rate” is set to 29.97 fps or 59.94 fps and “Start timecode” is set to 00:00:00:00, 01:00:00:00 or 10:00:00:00. Select this checkbox to force the timecode to stay in sync with real-time duration during playback.

Cropping, Padding, and Rotation

Customize the final cropping, sizing, aspect ratio, and orientation of video in Compressor using the Cropping, Padding, Rotation, and Flip properties.

Cropping removes video content from an image. Padding scales the image to a smaller size while retaining the output image’s frame size. For more information about these properties, see Intro to modifying frame size in Compressor.

You can also rotate and flip the final output image in Compressor using the Rotation and Flip properties. These allow you to rotate a widescreen image to be vertical, or to reverse the image horizontally, vertically, or both.

• Cropping: Use this pop-up menu to set the dimensions of the output image. The default setting is None, but you can choose a cropping preset in the menu to change the dimensions of the output image. Choose Letterbox Area of Source to have Compressor detect image edges and automatically apply crop values. This is useful if you want to remove a source file’s letterbox area by cropping out the black bars above and below the widescreen image. Choose “Center crop for output ratio” to ensure that the video remains centered in the new aspect ratio when you modify the frame size of the output. For custom cropping, choose None, then enter pixel values into the Top, Bottom, Left, and Right text fields.

• Padding: Use this pop-up menu to set the scaling of the output image while retaining the size of the frame. This is particularly useful when you’re creating a pillarbox (black bars on the sides of the frame) or a letterbox (bars above and below the frame) around your source material. The default setting is None, but you can choose a padding preset in the menu. Choose Preserve Source Aspect Ratio to ensure that the aspect ratio remains unchanged when you modify the frame size of the output. For custom padding, choose None, then enter pixel values into the Top, Bottom, Left, and Right text fields.

• Rotation: Use this pop-up menu to set the rotation of the output image. The default rotation is None, but you can choose to rotate your image 90 degrees, 180 degrees, or 270 degrees. This is useful in situations when a camera was oriented incorrectly when capturing the video.

• Flip: Use this pop-up menu to flip the output image. The default setting is None, but you can choose Horizontal, Vertical, or Horizontal and Vertical. This is useful if you want the output image to mirror the input image horizontally, vertically, or both.

  Note: The Rotation property is always applied before the Flip property.

Quality

The following properties provide instructions for image analysis used by Compressor, including frame resizing, clip retiming, and deinterlacing:

• Resize filter: This pop-up menu sets the resizing method. There are several options:

  • Nearest Pixel (Fastest): Samples the nearest neighboring pixel when resizing an image. This option provides the fastest processing time, but it’s more likely to show aliasing artifacts and jagged edges.

  • Linear: Adjacent pixel values are averaged using a linear distribution of weights. This option produces fewer aliasing artifacts than Nearest Pixel, with a small increase in processing time.

  • Gaussian: Adjacent pixel values are averaged using a Gaussian distribution of weights. This option provides a medium trade-off between processing time and output quality.

  • Lanczos 2: Adjacent pixel values are averaged using a truncated sinc function. This option is slower than Gaussian but provides sharper results.

  • Lanczos 3: Similar to Lanczos 2 but averages more pixel values. This option is slower than Lanczos 2 but may produce better results.

  • Bicubic: Adjacent pixel values are averaged using a bicubic function. The processing time and output are most similar to Lanczos 2 and Lanczos 3.

  • Anti-aliased (Best): Provides the highest output quality, but can take substantially longer to process.

• Retiming quality: This pop-up menu sets the retiming method. There are four options:

  • Fast (Nearest Frame): Interpolates frames linearly using nearest neighbor frames.

  • Good (Frame Blending): Blends neighboring frames using a filter to produce good-quality interpolation.

  • Best (Motion Compensated): Uses optical flow to interpolate using areas of movement between neighboring frames to produce high-quality output.

  • Reverse Telecine: Removes the extra fields added during the telecine process to convert the film’s 24 fps to NTSC’s 29.97 fps. See Use reverse telecine in Compressor.

• Adaptive details: Select this checkbox to use advanced image analysis to distinguish between noise and edge areas during output.

• Anti-aliasing level: Sets the softness level in the output image. To increase softness, double-click the value and then manually enter a new value, or drag the slider to the right. This property improves the quality of conversions when you’re scaling media up. For example, when transcoding SD video to HD, anti-aliasing smooths jagged edges that might appear in the image.

• Details level: Sets the sharpness of detail in the output image. You can use this control to add detail back to an image being enlarged. Double-click the value and then manually enter a new value, or drag the slider to set the value. Unlike other sharpening operations, the “Details level” property distinguishes between noise and feature details, and generally doesn’t increase unwanted grain. Increasing this value may introduce jagged edges, however, which can be eliminated by increasing the “Anti-aliasing level” slider.

• Dithering: When selected, adds a certain type of noise to images to prevent large-scale distracting patterns such as color banding. If your image has excessive noise after rendering, deselect this checkbox.

Video Effects

For a list of available video effects in Compressor, and instructions on how to add a video effect to a preset, see Add and remove effects in Compressor.

Audio Properties

• Channel layout: Use this pop-up menu to set the audio channel layout.

• Sample rate: The number of times per second that music waveforms (samples) are captured digitally. The higher the sample rate, the higher the audio quality and the larger the file size. For all MXF presets, this value is locked at 48 kHz.

• Sample size: Use this pop-up menu to set the sample size of the audio signal.

• Channels as: Use this pop-up menu to set the distribution of audio channels. There are two options:

  • Mono tracks: The exported file uses a separate track for each audio channel.

  • Multitrack: The exported file combines all audio channels into a single track.

  Note: Not all compression presets provide both options.

Audio Effects

For a list of available audio effects in Compressor, and for instructions on how to add an audio effect to a preset, see Add and remove effects in Compressor.