Fourteen bays with independent 100MB/s ATA channels for up to 7TB of storage
Also included
M5, M6 and 10/32-inch mounting screws; caged nuts; two agency-approved 12-foot power cables
Service and support
90 days of free telephone support and one-year limited warranty. Optional AppleCare Support plans are available.
Specifications
RAID controllers and cache memory
Dual independent controllers, each with environment management coprocessor for out-of-band remote management and monitoring
512MB of cache per controller (1GB total)
Cache Backup Battery Modules (sold separately) for over 72 hours of memory protection
RAID operation
Support for RAID levels: 0, 1, 3, 5, 0+1,10, 30, 50 (10, 30 and 50 require host-based software RAID)
Support for multiple RAID sets, multiple hosts and LUN masking and mapping
Background RAID set creation; automatic variable background rebuilding; online expansion; LUN slicing; global drive hot sparing (per RAID controller) (2)
Fibre Channel storage-to-host connection
Dual 2Gb Fibre Channel ports (SFP), 200MB/s throughput per channel with guaranteed delivery (400MB/s full duplex) (3)
Host connectivity using 2Gb Apple Fibre Channel PCI-X Card or Apple Fibre Channel PCI Express Card (cards sold separately) or compatible third-party PCI card
Support for point-to-point, loop and fabric (switched) topologies
Dual 10/100BASE-T Ethernet for remote management
Apple Fibre Channel PCI Express Card (sold separately)
Dual-channel 2Gb Fibre Channel PCI Express Bus Adapter
Runs at full bandwidth in a four-lane or eight-lane PCI Express slot on the new Power Mac G5; not compatible with PCI or PCI-X
Two 2.9-meter Fibre Channel copper cables with embedded SFP transceivers; compatible with SFP fiber-optic cables and transceivers
Apple Fibre Channel PCI-X Card (sold separately)
64-bit, 133MHz card with two SFP 2Gb Fibre Channel ports; compatible with 32-bit, 66MHz PCI slots and 64-bit, 100 MHz or 133 MHz PCI-X slots
Two 2.9-meter Fibre Channel copper cables with embedded SFP transceivers; compatible with SFP fiber-optic cables and transceivers
Supported SFP Types
Short-Haul Transceiver (supports up to 500m with 50/125 m MMF)
Finisar FTRJ-8519-P1BNL
Pico Light PL-XPL-VE-S24-11
Pico Light PL-XPL-VC-S23-11
JDS Uniphase JSM-21S0AA1
JDS Uniphase JSP-21S0AA1
Long-Haul Transceiver (supports up to 10km with 9/125 m SMF)
Finisar FTRJ-1319-P1BTL
Cooling
Redundant hot-swap cooling modules with self-regulating speeds and front-to-back cooling
Environmental monitoring system for automatically maintaining optimal ambient temperature
Electrical requirements
Redundant load-sharing hot-swap power supplies (450W); universal input (100V to 240V AC), power factor corrected
Maximum input current: 7.6A (100V to 127V) or 3.6A (200V to 240V)
Power usage: 300W typical continuous power, 400W maximum continuous power
Dual DB-9 serial ports for UPS systems
Frequency: 50Hz to 60Hz, single phase
Environmental requirements
Operating temperature: 50° to 95° F (10° to 35° C)
Storage temperature: -40° to 116° F ( -40° to 47° C)
Relative humidity: 5% to 95% noncondensing
Maximum thermal output: 1365 BTUs per hour
Maximum altitude: 10,000 feet
FCC Class A approved
Size and weight
3U rack-optimized: 5.25 inches (13.3 cm) high by 17 inches (43.2 cm) wide by 18.4 inches (46.7 cm) deep
Fits EIA-310-D-compliant industry-standard 19-inch-wide four-post racks from 24 to 36 inches deep; deeper racks require third-party extender
60-100 pounds (27-45 kg), depending on configuration (4)
For hard drive capacity measurements, 1GB = 1 billion bytes and 1TB = 1 trillion bytes; actual formatted capacity less.
Automatic rebuild requires a designated hot spare; not available for RAID level 0.
Actual rates will vary depending on configuration and RAID level.
Weight varies by configuration and manufacturing process.
Product specifications are subject to change without notice.