Edit chart text, markings, and labels in Pages for iCloud

You can change the font, font style, and size of all the text in a chart at the same time.

1. Select the chart.

2. Click Chart at the top of the Format  sidebar on the right, then use the controls below Chart Font & Text Size to do any of the following:

   • Change the font and font style: Click the first pop-up menu and choose a font, then click the second pop-up menu and choose a style (bold, italic, and so on).

   • Change the font size: Click the small or large A button one or more times to make the font smaller or bigger.

The predesigned chart styles use different font sizes for labels and other text elements. When you make the font smaller or bigger, all text elements decrease or increase proportionally. You can’t choose an individual text element and change the size for only that element.

You can display the value of each data point in a data series. The values can be formatted as numbers, currency, percentages, and more.

1. Select the chart.

2. In the Format  sidebar on the right, do one of the following to add values to the chart:

   • For column, bar, line, area, and radar charts: Click Series at the top of the sidebar, then click the Value Labels pop-up menu and choose a number format.

   • For pie charts: Click Wedges at the top of the sidebar, then click the Value Data Format pop-up menu and choose a number format.

   • For donut charts: Click Segments at the top of the sidebar, then click the Value Data Format pop-up menu and choose a number format.

   • For bubble or scatter charts: Click Series at the top of the sidebar, then click the Value Data Format pop-up menu and choose a number format.

3. Choose additional formatting from the options that appear in the sidebar (below the Value Labels or Value Data Format pop-up menu), such as the number of decimal points.

   For detailed information about the options, see Format cells as currency, dates, and more in Pages for iCloud.

4. To add a prefix or suffix or position the value label, do any of the following:

   • Add a prefix or suffix: Enter the prefix or suffix in the corresponding field. Anything you enter is prepended or appended to the label.

   • Position value labels: Choose an option from the Location pop-up menu.

5. If you’re editing a bubble chart, you can also choose which data series value is shown. Make sure the Values checkbox is selected, then from the pop-up menu choose X, Y, or Size.

If you have a stacked column, stacked bar, or stacked area chart, you can add a label that shows the total sum for each stack.

1. Select a stacked chart, then in the Format  sidebar on the right, click the Series tab.

2. Under Summary Labels, click the pop-up menu, then choose a format.

3. To fine-tune how the summary label values are displayed, make your choices using the options that appear below the Summary Labels pop-up menu.

   The options vary depending on the chosen summary label format. For example, when Currency is selected, you can choose the number of decimals, whether negative values appear in parentheses or with a negative sign, and the currency format.

4. To add a prefix or suffix to each summary label, type the text you want to add in the fields below Prefix and Suffix.

5. To adjust the distance between the summary labels and the stacks, tap the up or down arrows next to Offset.

You can specify which labels appear on an axis, edit their names, and change their orientation.

1. Select the chart.

2. Click Axis at the top of the Format  sidebar on the right, click Value (Y) or Category (X) depending on the axis you want to modify (y or x), then do any of the following:

   • Show the axis name: Select the Name checkbox, then type the axis name.

   • Draw a line along the axis: Select the Axis Line checkbox.

   • Show the series names for the category axis: Make sure Category (X) is selected at the top of the Axis tab, then select the Series Names checkbox.

   • Show category labels: Make sure Category (X) is selected at the top of the Axis tab, then select the Category Labels checkbox.

   • Change the label angle: Click the Label Angle pop-up menu and choose an orientation.

Most charts have axis markings, which you can modify in a number of ways. You can change the axis scale, change the range and frequency of gridlines, and show or hide tick marks.

1. Select the chart.

2. Click Axis at the top of the Format  sidebar on the right, then click Value (Y) or Category (X) depending on the axis you want to modify (y or x).

3. Do any of the following:

   • Change the scale for the value axis: Choose an option from the Axis Scale pop-up menu. You can choose Linear, Logarithmic (for non-stacked charts only), or Percentage (for stacked charts only).

   • Set maximum and minimum values for the value axis: Enter a value in the corresponding Scale fields.

   • Set increments for major and minor gridlines for the value axis: Enter a value in the corresponding Steps fields.

   • Show gridlines: Select the checkboxes for the gridlines that you want to show.

     If you’re working with a radar chart, you can also click the pop-up menu below Radial Lines (in the Category (X) tab) and choose a line type.

   • Show tick marks: Select the Tick Marks checkbox.

     If you’re working with a radar chart and you want the tick marks to appear only the y-axis, select the Axis Line Only checkbox.

1. Select the chart.

2. To show the legend, click Chart at the top of the Format sidebar on the right, then select the Legend checkbox.

3. Click Edit Chart Data below the chart (the chart must be selected to see it), then edit the row or column headings in the chart data table.

4. To move or resize the legend, select only the legend (click the chart, then click the legend), then do any of the following:

   • Move the legend: Drag the legend to a new location.

   • Resize the legend: Drag the handles on the left or right side of the legend.

You can add reference lines to show the average, median, minimum, and maximum values in a chart (excluding stacked, 2-axis, pie, and donut charts). You can also add custom reference lines to show any value you want.

1. Select the chart.

2. Click Axis at the top of the Format  sidebar on the right, then click the Value button.

3. Click the Add Reference Line pop-up menu, then choose a type:

   • An automatically calculated value: Choose Average, Median, Maximum, or Minimum, and if you like, edit the name.

   • A custom value: Choose Custom, then enter a number for the reference line, and if you like, a name.

     For example, you might want to show a line that represents last year’s top sales amount.

4. Do any of the following:

   • Hide the reference line name or value: Deselect its checkbox.

   • Add another reference line: Click the Add Reference line pop-up menu, then choose a new type.

     You can add up to five reference lines.

   • Delete a reference line: Move your pointer over the reference line item in the sidebar, then click the Trash icon that appears.

You can add labels to the data series in a scatter, bubble, pie, or donut chart to indicate the type of data shown.

1. Select the chart.

2. Do one of the following:

   • For scatter or bubble charts: Click Series at the top of the Format  sidebar on the right, then select the Show Series Name checkbox.

     Tip: If some labels overlap in a bubble chart, deselect the Show Labels In Front checkbox to show each label on top of its bubble, but potentially behind other bubbles.

   • For pie or donut charts: Click Wedges or Segments at the top of the Format sidebar on the right, then select the Data Point Names checkbox.

By default, interactive charts include a slider and buttons that you can use to view the chart data—just drag or click the slider to change the data that’s shown. You can also choose to interact using only buttons.

You can also place data set names above or below an interactive chart.

1. Select an interactive chart, then click Chart at the top of the Format  sidebar on the right.

2. Do one of the following:

   • Change the interactive controls: Click the Interactive Chart pop-up menu, then choose Slider and Buttons or Buttons Only.

   • Change the location of the data set name: Click the Data Set Name pop-up menu (below Interactive Chart), then choose Above or Below.