Revive or restore a Mac with Apple silicon using Apple Configurator
In very rare circumstances, such as a power failure during a macOS update or upgrade, a Mac may become unresponsive and so the firmware must be revived or restored.
Important: First try reviving the computer. If that fails or if you can’t start the Mac from the startup volume or the recoveryOS, you must restore the firmware and erase the internal flash storage.
What does a revive do to your Mac?
A revive updates the firmware and updates recoveryOS to the latest version. A revive is designed to not make any changes to the startup volume, the user’s data volume, or any other volumes. User data may be retained if recoverable.
What does a restore do to your Mac?
A restore updates the firmware, updates recoveryOS to the latest version, and erases and installs the latest version of macOS on your internal storage. When this process is complete, any data on any internal volumes is unrecoverable.
You must restore the firmware and erase the internal flash storage if:
Reviving the firmware is unsuccessful
You can’t start the Mac from the startup volume or the recoveryOS
Before you begin
These revive and restore instructions cover the following Mac computers with Apple silicon:
Mac Pro (2023)
Mac Studio (2023)
Mac Studio (2022)
iMac (24-inch, M1, 2021)
MacBook Pro (16-inch, 2023)
MacBook Pro (14-inch, 2023)
MacBook Pro (13-inch, M2, 2022)
MacBook Pro (16-inch, 2021)
MacBook Pro (14-inch, 2021)
MacBook Pro (13-inch, M1, 2020)
Mac mini (2023) with M2 Pro
Mac mini (2023) with M2
Mac mini (M1, 2020)
MacBook Air (15-inch, M2, 2023)
MacBook Air (M2, 2022)
MacBook Air (M1, 2020)
Make sure you have:
The latest version of Apple Configurator installed on a Mac running macOS 12.4 or later
Internet access
You may need to configure your web proxy or firewall ports to allow all network traffic from Apple devices to Apple’s network 17.0.0.0/8. For more information on the ports used by Apple products, see the Apple Support article Use Apple products on enterprise networks. For more information on whether your network uses a web proxy or firewall, consult your router manual or your internet provider.
A supported USB-C to USB-C charge cable, such as the one sold by Apple (may not be available in all countries or regions) or a supported USB-A to USB-C cable
The USB-C cable must support both power and data. Thunderbolt 3 cables aren’t supported.
How the revive and restore processes work
The revive and restore processes involve the following steps:
Step 1. Plug the Mac computers together with a supported USB-C cable, locate Apple Configurator in the Applications folder or in Launchpad, then launch Apple Configurator on the first Mac.
Step 2. Restart the second Mac using a special key sequence. The key sequence varies according to the type of Mac you want to revive or restore.
Step 3. Use Apple Configurator to revive the Mac.
Step 4. If a revive is unsuccessful, you can use Apple Configurator to restore the Mac.
Step 1: Connect the Mac computers
Make sure your first Mac with Apple Configurator installed is plugged into a power source and started.
Shut down the second Mac.
Plug in the USB-C cable (along with any adapters needed) and connect the two Mac computers.
For the desktop Mac Pro, plug the USB-C cable into the Thunderbolt port farthest away from the power button.
For the rack mount Mac Pro, plug the USB-C cable into the Thunderbolt port closest to the power button.
Launch Apple Configurator
.
Step 2: Prepare the Mac you want to revive or restore
If reviving or restoring an iMac (24-inch, M1, 2021)
1. Disconnect the iMac from power.
2. While holding down the power button, connect the iMac to power and continue to hold the power button for about 3 seconds.
Note: You won’t see any initial screen activity from the iMac you want to revive or restore. After the revive or restore begins, you’ll see an Apple logo and progress bar.
If reviving or restoring a Mac Studio or Mac mini
1. Optionally connect a monitor (if you want to see when the process is complete).
2. Disconnect the Mac Studio or Mac mini from power for at least 10 seconds.
3. Press and hold the power button.
4. Reconnect power while still holding the power button.
5. Release the power button.
The status indicator light should turn amber, and a DFU icon should appear in Apple Configurator on the Mac mini.
Note: You won’t see any initial screen activity from the Mac Studio or Mac mini you want to revive or restore. After the revive or restore begins, you’ll see an Apple logo and progress bar if a monitor is connected.
If reviving or restoring a Mac portable computer
1. Plug the Mac portable into power.
2. Press and release the power button.
3. Press the power button again and at the same time press all three of the following keys for about 10 seconds:
The right Shift key
The left Option key
The left Control key
4. After 10 seconds, immediately release the three keys but continue to hold down the power button until a DFU icon appears in Apple Configurator on the first Mac.
Note: You won’t see any initial screen activity from the MacBook Air or MacBook Pro you want to revive or restore. If the MacBook Pro uses a MagSafe connector, you won’t see the LED charging light. After the revive or restore begins, you’ll see an Apple logo and progress bar.
Step 3: Revive the firmware and install the latest recoveryOS
In the Apple Configurator
window on the first Mac, select the DFU icon of the Mac whose chip firmware you want to revive and whose recoveryOS you want updated to the latest version.
Do one of the following:
Choose Actions > Advanced > Revive Device, then click Revive.
Control-click the selected DFU icon, then choose Advanced > Revive Device, then click Revive.
Note: If you lose power to either Mac during this process, begin the revive process again.
Wait for the process to complete. During this process, an Apple logo will appear and disappear on the second Mac.
After the process successfully completes, your Mac will reboot.
Note: If the revive was unsuccessful, proceed to Step 4 below.
Quit Apple Configurator on the first Mac, then unplug any cables and adapters.
Step 4: Restore the firmware, erase all data and reinstall the latest version of recoveryOS and macOS
In the Apple Configurator
window on the first Mac, select the DFU icon of the Mac to be restored.Do one of the following:
Choose Actions > Restore, then click Restore.
Control-click the selected DFU icon, then choose Actions > Restore, then click Restore.
The restore confirmation dialog. Note: If you lose power to either Mac during this process, begin the restore process again.
Wait for the process to complete. During this process, an Apple logo will appear and disappear on the second Mac.
After the process completes, your Mac will restart.
If the process was successful, you’re presented with the macOS Setup Assistant on the second Mac. If the macOS Setup Assistant doesn’t appear, repeat the restore process.
Quit Apple Configurator on the first Mac, then unplug any cables and adapters.