Set up your MagSafe Charger
Connect the USB-C connector on your MagSafe Charger to a recommended 20 watt (W) or greater Apple USB-C power adapter or compatible third-party USB-C adapter. You can also connect to a USB-C port on a Mac or PC.
Place your MagSafe Charger face up—as shown—on a flat surface, clear of any metal objects or other foreign material.
Get up to 15W faster wireless charging
The MagSafe Charger is designed to quickly and safely wirelessly charge your iPhone 12. The system intelligently adapts to conditions in order to optimize charging iPhone 12 at up to 15W of peak power delivery for faster wireless charging. The actual power delivered to the iPhone will vary depending on the wattage of the power adapter and system conditions. For iPhone 12 mini, the MagSafe Charger delivers up to 12W of peak power delivery.
It's important to plug into a power source before placing your iPhone on the MagSafe Charger. This allows MagSafe to verify it's safe to deliver maximum power. If you happen to place your iPhone on the MagSafe Charger before plugging into a power source, simply remove your iPhone from the MagSafe Charger, wait three seconds, and then put it back on to resume maximum power delivery.
The MagSafe Charger is designed to negotiate the max power up to 9 volt (V) and 3 amp (A) with a USB PD-compatible power adapter. MagSafe will dynamically optimize power delivered to the iPhone. The power delivered to the iPhone 12 at any moment will vary depending on various factors, including temperature and system activity.
All power adapters have different ratings for amount and rate of power delivery. The MagSafe Charger requires the following ratings to deliver faster wireless charging.
Compatible power adapters for up to 15W faster wireless charging
- USB-C connector. USB-A is not supported
- 9V/2.22A or 9V/2.56A and higher
- iPhone 12 mini can get up to 12W for faster wireless charging with at least 9V/2.03A
- Higher wattage adapters at or above 9V/2.56A will also deliver a maximum of up to 15W peak power to iPhone 12*
When Lightning accessories such as headphones are connected, charging is limited to 7.5W to comply with regulatory standards.
* The MagSafe Charger will also function with power adapters that provide a minimum 12W (5V/2.4A) of power, but this will result in slower charging.
- Your MagSafe Charger is designed for faster and most efficient charging with iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, and Apple MagSafe accessories.
- When charging a non-MagSafe Qi-compatible device with a MagSafe Charger, power is reduced and charge times may be slower than on a typical Qi charger.
- Don't place credit cards, security badges, passports, or key fobs between your iPhone and MagSafe Charger, because this might damage magnetic strips or RFID chips in those items.
- If you have a case that holds any of these sensitive items, remove them before charging or make sure that they aren’t between the back of your device and the charger.
- If your iPhone is connected to both a MagSafe Charger and power via a Lightning port, your iPhone will charge via the Lightning connector.
- As with other wireless chargers, your iPhone or MagSafe Charger might get slightly warmer while your iPhone charges. To extend the lifespan of your battery, if the battery gets too warm, software might limit charging above 80 percent.
- If you keep your iPhone in a leather case while charging with your MagSafe Charger, the case might show circular imprints from compression of the leather. This is normal, but if you’re concerned about this, we suggest using a non-leather case.
- Learn how to clean your MagSafe Charger.
- Learn about the magnets in MagSafe products.