MacBook Pro (16-inch, 2023) Display Hinge Covers

Before You Begin

Remove the following parts before you begin:

Tools

  • Adjustable torque driver (10–34 Ncm)

  • ESD-safe tweezers

  • Torx T5 bit

Removal

  1. Use the 10–34 Ncm adjustable torque driver and T5 bit to remove the two T5 screws (923-06853) from each display hinge cover.

  2. Use ESD-safe tweezers to remove the two display hinge covers from the top case.

Reassembly

  1. Use ESD-safe tweezers to position the two display hinge covers in the top case.

    • Important: Ensure that the top edge of each display hinge cover sits under the top edge of the top case.

  2. Set the torque value of the adjustable torque driver to 10 Ncm.

  3. Use the 10–34 Ncm adjustable torque driver to reinstall two T5 screws (923-06853) into each display hinge cover.

Reinstall the following parts to complete reassembly:

Published Date: