This article has been archived and is no longer updated by Apple.

Logic Pro 10.3 release notes

Find out about current and previous Logic Pro 10.3 updates.

Before updating Logic Pro, make sure youback up the currently installed version of the Logic Pro application and your Logic Pro projects.

New in Logic Pro 10.3.3

New Features/Enhancements

  • Logic Pro now supports up to 36 cores.

  • Sculpture and Amp Designer are now optimised for iMac Pro, and deliver up to 12 times the performance of previous versions.

  • Sculpture offers a new high-definition mode that provides higher string resolution.

Stability and Reliability

  • Loops, Channel Strip settings and other content are available again on Macs using APFS (Apple File System), and on which Logic 8 or Logic 9 had been installed prior to Logic Pro.

  • Logic no longer shuts down unexpectedly:

    • When user loops created in Logic Pro 10.0.7-10.1.1 are dragged into the Tracks area.

    • When adjusting the left-hand corner of a region in projects that contain an Environment Macro that includes a Sysex fader.

    • When the Enter key has been pressed to start a bounce while the mouse is being used to adjust the start or end point of the bounce.

    • When the Tracks menu is selected while the Audio File Editor is open and no audio region has been loaded.

    • When Repeat Section has been used on a region in an Electronic Drummer track.

    • When previewing audio in the Audio Bin after enabling Transient Editing in the Audio File Editor.

    • When on a MacBook Pro with Touch Bar the Shift key has been used to add to the region selection in the Tracks area where the Score window has focus.

    • When the Shift and Option keys have been used while adjusting the length of notes in an independent Event List window.

    • When inserting Program Change events into the Piano Roll in MIDI Draw view.

    • When right-clicking a line break in the Score.

    • When pressing OK to confirm a clef change in the Score.

    • Logic no longer occasionally hangs when the "Convert Sustain Pedal to Note Length" Score function is used.

Plug-ins

  • Sidechain detection is no longer delayed when the side chain source is a Software Instrument track in Live Mode.

  • Latency compensation now works reliably with plug-ins inserted as Dual Mono or Multichannel.

  • Amp Designer no longer occasionally changes gain unexpectedly after stopping or repositioning the Playhead.

  • Tracks that include MIDI plug-ins play back again when frozen.

  • Scripter now reliably transmits MIDI events on time in scripts that start with a Needs TimingInfo = true statement.

  • Software Instrument tracks that include a Scripter plug-in no longer occasionally reset the instrument to a default sound when the project has been reloaded or the audio driver has been relaunched.

  • Tracks using the EXS24 Coffee Shop Percussion or Latin Percussion instruments now play in sync when triggered by the Scripter “Drum Probability Sequencer” script.

Alchemy

  • Alchemy no longer fails to show its installed Library in certain very rare cases.

Editing

  • The Piano Roll now shows velocity bars reliably on notes the first time it is opened after recording MIDI into a new project.

  • The Piano Roll shows MIDI notes again as they are being recorded.

  • The length display of notes in the Event List is now reliably correct in projects that include time signature changes.

  • The Step Editor now updates immediately as notes are moved using the Finger Tool.

  • Vertical Auto-zoom works correctly again in the Audio Track Editor.

  • The keystroke combination to temporarily limit dragging to one direction in the Piano Roll works again as expected.

  • Roland U-110 synth modules no longer display a checksum error when an associated Sysex Fader in the Environment is adjusted.

  • It is again possible to create velocity ramps in MIDI Draw that maintain the existing relative values of note velocities.

Accessibility

  • It is again possible to modify the start and end time of a bounce using VoiceOver

  • The VoiceOver cursor now reliably remains functional when shortening a region at all zoom levels.

  • Navigating into an open Take Folder with VoiceOver no longer causes a continuous system beep.

  • Switching from the Main Window Piano Roll to the Score with VoiceOver no longer causes the editor to close.

  • Using the Shift key with the cursor with VoiceOver to adjust the granularity of movement while positioning the Playhead no longer causes a Logic is Busy alert or an unexpected hang.

  • Adjusting the loop length of a Drummer region with VoiceOver no longer causes the loop handle to occasionally jump unexpectedly to the next region in the track.

Score

  • There is no longer a large unexpected offset when inserting objects into the score in page mode in documents with multiple pages.

  • Brackets for Guide Accidentals in the Score are visible again as expected.

Track Alternatives

  • Packing regions into a folder no longer causes Track Alternatives on other tracks to disappear.

  • Hidden Track Alternatives that are packed into a Folder are no longer displayed in the wrong position when viewed inside the Folder.

Export/Rendering

  • Bouncing a project while Logic is downloading content no longer occasionally results in bounced files with corrupted audio.

  • Mono tracks that contain Mono > Stereo plug-ins play back again as stereo after they have frozen.

Takes/Comping

  • Comping now works correctly when the “Select Tracks on Region Selection” preference has been turned on.

Control Surfaces/MIDI Controllers

  • Waveform zoom works again as expected with Mackie C4 control surfaces.

  • Logic no longer displays an incorrect “Incompatible EuCon version” error with EuCon software version 3.7.

Videos

  • Videos now play back when the Show/Hide Video command is used while the video preview is closed in the Inspector.

General

  • MIDI settings for External Instruments that are saved as part of a Patch are now reliably maintained when the patch has been reloaded.

  • Setting a Track Delay on an External MIDI track no longer affects the timing and note lengths of notes on other tracks.

  • The note overview of MIDI regions is now updated immediately to reflect changes to the region content when Automation is visible.

  • Notes sent to External MIDI tracks no longer occasionally hang when using Rewind or Rewind by Division when there is a Track Delay set for the External Instrument track.

  • Custom icons are now reliably sorted into the correct order on Macs with APFS-formatted drives.

  • Logic now successfully creates project backups on macOS High Sierra.

  • The Musical Grid is now displayed reliably when it has been set as the secondary ruler.

Previous versions

Logic Pro 10.3.2

New features and enhancements

  • Includes three new Drummers who play percussion in the styles of Pop, Songwriter and Latin.

  • Add new Drummer loops to your song and then customise them with performance controls.

  • The pitch of an audio region can now be transposed or fine-tuned.

  • Alchemy includes an automatic time-align feature for improved morphing.

  • New additive effects in Alchemy expand the options for filtering and modulating sound.

  • There is now a key command to Copy Section Between Locators (Global), which copies all content between the locators regardless of selection.

  • In Flex Pitch, there is now a contextual menu item to reset all Flex Pitched notes in all currently selected regions.

  • Adds support for creating momentary buttons in Scripter.

  • The Surround Panner and Surround Balancer have been updated with new Retina-ready interfaces.

  • In the Arpeggiator, it is now possible to adjust the lengths of individual steps in the pattern grid.

  • Option-clicking a MIDI Monitor object in the Environment now clears the contents of all MIDI Monitor objects in the project.

  • There is now a key command to Toggle Help Tags.

  • Pressing Option while showing or hiding Track Alternatives now toggles the setting for all tracks.

  • It is now possible to link L and R controls for Dual Mono plug-ins.

  • There is now a key command Remove Fades.

  • There is now an Audio > General preference to reserve lowered number buses from auto-assignment.

  • Shift-clicking when closing in a plug-in window now closes all open plug-in windows.

Stability and reliability

  • Logic Pro no longer quits unexpectedly after performing the Undo function after the command Copy Selected Regions to Selected Track on a marquee selection has been used.

  • Logic Pro no longer occasionally quits unexpectedly when:

    • Using the Repeat Regions/Events command after inserting a note with the Pencil tool in the Piano Roll when Link is off and the Library is open.

    • Opening a project that contains instances of Camel Audio Alchemy 1.5 and Logic Pro Alchemy.

    • Moving a marquee selected set of flex markers in the Audio Track Editor.

    • Selecting a newly downloaded Drum Machine patch while the Musical Typing window and Drummer Editor are open.

  • Logic Pro no longer hangs when importing audio into an independent Project Audio window when no other windows are open.

  • Logic Pro no longer occasionally hangs when:

    • Arrowing between certain patches in the Library.

    • Copying several times to the Tracks area in quick succession.

    • The Change Gain function is used in the Audio File editor.

Performance

  • Improves responsiveness of the graphical user interface especially on Retina or other high-resolution displays when doing the following:

    • Resizing windows and areas.

    • Dragging and trimming regions.

    • Opening and closing the Piano Roll editor.

    • Zooming and scrolling in large projects, especially those that contain a large number of flex edits or tempo events.

    • Stepping through tracks using the up/down arrow keys.

    • Adjusting parameters of multiple selected events in the Event List when the Step Editor is also open.

    • Selecting grouped tracks with Flex edits using a EuCon control surface.

    • Adjusting region borders.

  • Adjusting region parameters on audio regions with Flex Pitch active while playing back no longer leads to occasional bursts of noise.

  • Indexing the Apple Loop library is now much faster.

  • Performance is improved in Alchemy’s Spectral Editor and other real-time displays.

  • Dragging regions with a Force Touch trackpad no longer occasionally causes the trackpad to vibrate unexpectedly.

  • Audio quantisation in projects that contain a large number of tempo changes is now much faster.

Alchemy

  • Alchemy adds five new Additive effects: Saw+Noise, Noise, Comb, EQ, Filter, Strum, Ripples plus additional controls for Pulse/Saw.

  • Alchemy adds 12 new synthesised formant filter shapes.

  • Alchemy now time-aligns sources automatically when morphing.

  • Alchemy now offers a Tune control in the Noise section.

  • Alchemy’s modulators now have a new On trigger mode, which allows Effects parameters to be re-triggered on all new MIDI notes.

  • There are new options in Alchemy’s Note Properties menu, Stepped4, Stepped8 and Stepped16. These options function like the Flip Flop property, but also produce a modulation signal that cycles through equally spaced values between successive notes.

  • There is now a setting in the Key Trigger menu in Alchemy’s arpeggiator Cycle Reset that ensures the pattern always starts at the first note at step one of the sequencer.

  • The Browser in Alchemy now includes Newer Than and Older Than column options to constrain the preset list based on the installation date of the content.

  • The default rate for a new instance of the Arpeggiator in Alchemy is now 1/16.

  • The maximum number of partials in Alchemy’s Great quality mode has been raised from 128 to 256.

  • Alchemy adds 21 new Arpeggiator presets.

  • Alchemy’s Additive Effects knobs for Pulse/Saw – Sync, Shift – Pitch and Magnet – Pitch now show semitones when being edited.

  • Effects in Alchemy’s Effects Rack are now sorted into categories.

  • Copy/pasted modulations now include the full routings assigned to all associated depth knobs.

  • Alchemy’s Keyswitching now defaults to KEYSW1 instead of SNAP1.

  • Alchemy's Zone Editor now handles the display of large numbers of Warp Markers by only showing every 10th marker when there are more than 30 markers to be displayed.

  • The Alchemy interface now responds instantly to mouse input on wide colour P3 displays.

  • Alchemy uses up to 40% less memory than previous versions.

  • Apple Loops imported into Alchemy now remain reliably in sync.

  • When changing from Arpeggiator Snapshot to non-Arpeggiator Snapshot and back, the Arpeggiator is now switched back on.

  • The sound quality of Spectral Stretch has been improved at low speeds.

  • Auto Gain is now set to Off by default in Alchemy’s Morph XY/Lin mode.

  • It is now possible to modulate Alchemy’s Keyswitch knob with Arp Mod.

  • The last step in the Alchemy Arpeggiator/Step Sequencer is no longer unexpectedly tied when a MIDI file is imported.

  • In Spectral mode, adjusting the Simplify control in the Cloud Spectral effect no longer cancels the effect.

  • Random note property modulators assigned to Keyswitch knobs mapped to samples in Alchemy now correctly randomise the keyswitches.

  • Setting a Comb Filter’s feedback value to 99% or higher in Alchemy’s Delay effect can no longer lead to uncontrolled feedback.

  • FM Keyfollow now scales correctly when two notes are played in a patch with the Voice Count set to 1.

  • When importing EXS instruments, Alchemy now merges EXS groups that are mapped to the same keyswitch or articulation.

  • The browser in Alchemy now retains user choices for column selections when switching from one preset to another.

  • The Waveshaper Bipolar button in Alchemy’s Effects Rack functions again as expected.

Drummer

  • Switching between Drummer characters during playback no longer occasionally causes Drummer to stop playing until playback has been stopped and started again.

  • The record button on Drum Machine Designer tracks is no longer unexpectedly disabled when changing drum kits.

  • The Duplicate Track command now works for Drummer or Software Instrument tracks assigned to Drum Machine Designer or Drum Kit Designer producer kits.

  • Drum Machine Designer tracks now always appear as expandable Track Stacks in the Tracks Area so that sub-tracks are available immediately for automation or other tasks.

  • Option-dragging a Drummer or Software Instrument track that uses Drum Machine Designer now correctly creates a Track Stack containing all the kit pieces.

Automation

  • Automation of grouped tracks now works when Project Settings > MIDI > General > Control Change 7/10 controls Volume/Pan of channel strip objects setting is active.

  • Region-based automation is now retained when Take folders are unpacked to Track Alternatives.

  • Automation points no longer occasionally jump to unexpected positions when edited after the Project start position has been adjusted.

  • Volume automation resets as expected when a cycle returns to the beginning.

  • The relative automation levels are once again maintained when using the Marquee tool to select and adjust automation on multiple tracks at once.

Flex

  • Audio regions with Flex edits no longer occasionally snap back to their original lengths when divided if Snap Edits to Zero Crossings has been enabled.

  • Velocities for MIDI notes created from Flex Pitched regions are now correctly scaled from 0-127.

  • The Transpose region parameter is now available for flexed regions.

  • Flex pitched notes no longer appear to shift in pitch when they are grabbed if the Select tracks on region selection preference has been enabled.

  • The pitch of any audio region, not just Apple Loops, can now be transposed or fine-tuned.

  • Audio regions no longer occasionally shift very slightly in time when Flex Pitch has been enabled.

Fades

  • When the right-hand portion of a crossfade has been adjusted, the left-hand region is no longer selected in order to avoid unintended edits to a previous crossfade.

  • Fades now reliably take immediate effect when created during playback.

Touch Bar

  • Swiping with two fingers on the Touch Bar in navigation mode now repositions the visible frame without moving the Playhead.

  • Global key commands are now available in the Touch Bar when there is no open window.

  • Labels for key commands on the Touch Bar can now occupy two lines, making them easier to read.

  • The Metronome button on the Touch Bar now dims when the Metronome is disabled and a count-in is enabled.

  • The Touch Bar drum pad no longer triggers a duplicate C#1 note from the button that should trigger a crash cymbal with a C#2 note.

  • When the Touch Bar keyboard is set to the melodic minor scale, certain notes no longer hang when playing a descending scale.

  • Tapping a key command on the Touch Bar when the Key Commands window is open now selects the command in the window instead of triggering the command.

  • The Touch Bar now correctly displays the glyph for the "Set Locators by Region" key command.

  • Pressing a modifier key now switches the Touch Bar to display key commands assigned to that modifier.

Takes and comping

  • The Snap Regions to relative value setting now works inside Take Folders.

  • When the right-hand edge of a Take folder is clicked, the display of the unused audio in the current comp no longer occasionally overlaps the next region in the track.

  • "Flatten and Merge" now works the same way, regardless of whether it is triggered from the widget on the Take Folder or by using the key command.

Track Alternatives

  • Show/Hide inactive Track Alternatives now works on all selected tracks.

  • It is now possible to rename a Track Alternative by double-clicking its name in the Track Header.

  • The Deselect All command now deselects all hidden inactive Track Alternatives.

  • Regions in the currently active Track Alternative are no longer occasionally lost after performing Undo of the command "Copy Selected Regions to Selected Track".

  • Performing the Repeat Section command no longer causes inactive Track Alternatives to be renamed unexpectedly.

  • Regions in all tracks of a group are now selected as expected when some tracks have Track Alternatives and others don’t.

  • Hidden Track Alternatives are now copied as expected when duplicating a track by option-dragging the track to a new empty track.

  • The Hide all Track Alternatives key command now also works when the currently selected track contains no Track Alternatives.

Track Stacks

  • Software instrument tracks in duplicated Track Stacks now maintain their correct track names.

  • Using the "New track with same Channel" command when the last track in a Track Stack is selected now places the new track inside the Track Stack.

  • The main track of a Summing Stack no longer doubles the MIDI Thru values for Transpose and Velocity when it has been selected.

  • Track names are now correctly retained when Software Instrument track stacks are Option-dragged to copy them.

Mixer

  • It is now possible to adjust either the pan or spread position of a Stereo Panner using a mouse or swipe gesture on a Magic Mouse, or two-finger swipe on a trackpad.

  • When duplicating a record-armed track, the newly created track is now armed.

  • There is now audio hardware device control for stereo tracks.

  • The solo button in the track header is now consistently displayed when a track is set to "Solo-safe".

  • Clicking the solo button in the Track Header of a Solo-safe track no longer disables "Solo-safe".

  • If there are split stereo files in the project, the Edit menu in the Project Audio window now offers options to disconnect a selected split stereo file, or to reconnect all split stereo files.

  • The R buttons on armed tracks now continue to blink reliably after a recording has started.

  • A stereo track with a mono plug-in now continues to sound mono when the plug-in has been bypassed.

  • I/O Labels are now associated with their correct hardware Outputs in the New Tracks window.

  • Patches saved with plug-ins that use Software Instrument tracks as side chain inputs now correctly recall the side chain setting when reloaded.

  • Dual mono plug-ins saved as part of an Aux channel strip setting are no longer converted to stereo when the setting has been reloaded.

  • Loading a patch no longer erases existing track notes in a track.

  • Dual Mono plug-ins on a track that has been set from stereo to mono now switch immediately to mono mode.

  • The Create Track command in the Mixer now works reliably.

  • The dry level for plug-ins inserted on Aux channels serving as summing buses are no longer unexpectedly set to zero when a new channel is routed to that Aux.

  • The first note played to a Software Instrument channel strip that includes sends no longer includes an unexpectedly large amount of reverb.

  • Low Latency mode now works as expected on Output channels above Output 1-2 that do not have plug-ins inserted on them.

  • User patches that include routing to channels that include a slash (/) in their name are now loaded correctly.

Plug-ins

  • When importing EXS instruments into Ultrabeat, up/down arrows to navigate sample zones are displayed again.

  • Adjustments to a bandwidth in the Channel EQ made by dragging the vertical helper lines in the interface are now reflected in the channel strip EQ thumbnail.

  • The Arpeggiator now starts again as expected when it receives a new set of notes while it's running.

  • There is now a preference to control whether the most recently used plug-ins are displayed in the plug-in list.

  • EXS24 now finds sampler Instruments as expected when there is an alias Sampler Instruments folder at the default location linked to a folder on an external drive.

  • Software Instrument channel strips with a MIDI plug-in inserted no longer occasionally stop playing.

  • Automatically playing patches now continue to run when the channel strip has not been selected.

  • It is now possible to copy/replace a plug-in in the Sample-Based Processing window by Option-dragging it.

  • The output resolution for the Modulator MIDI plug-in has been increased.

  • There is now a dedicated button to toggle Separation in the Surround Panner plug-in.

  • Undoing a change to the position of a plug-in in a channel strip no longer also undoes the last parameter change that has been performed on a plug-in.

  • When EXS24 is configured to change instruments when receiving certain MIDI notes, those same notes sent to an instance of Drum Designer no longer cause it to change presets.

  • Ultrabeat’s Voice Auto Select now works for muted notes.

  • The EXS24 option "extract MIDI Region from Instrument created from Audio Regions" is now consistently available.

  • Changing parameter values in Sculpture’s factory default setting now activates the Compare button.

  • Dragging EXS instrument files from the Finder onto the Ultrabeat interface now shows visible feedback.

  • Multiple instances of the Modulator MIDI plug-in set to output the Random waveform now each output a different waveform after the project has been closed and reopened.

  • The timing of the modulation of multiple instances of the Modulator MIDI plug-in now remains reliably in sync.

  • The Retrosynth plug-in settings now include a fourth modulation slider and target.

  • EXS24 now offers a Sample Select Random Offset setting for Groups

  • The Drum Machine Designer interface no longer changes unexpectedly when a new track is created by double-clicking below the last track in the Track header while Drum Machine Designer is open.

  • Custom arrangement of cells in Drum Machine Designer is now maintained when user created patches are reloaded.

  • The decay time in the Correlation Meter plug-in can now be adjusted to Slow, Medium or Fast.

  • The Loudness Meter now continues to show values after bouncing a project.

  • Sample Select Random in EXS24 now does a better job randomising samples when played with velocity values of 127.

  • EXS24 now shows the correct path to Instruments in cases where there is another Instrument with the same file name in a different folder.

  • The Ringshifter plug-in now offers controls for Delay Low Cut and Delay High Cut.

  • Dragging a control after setting it numerically no longer causes the value to jump to its original value in some Logic Pro plug-ins.

  • The Retro Chorus pedal in the Pedalboard plug-in no longer exhibits excessive warble at higher Depth settings.

  • When the cursor is hovered over the display area of the Channel EQ, the centre handles for all bands are now displayed.

  • Program changes are now passed to Software Instruments if there are no saved Performance Channel Strip settings.

  • The MIDI Transposer plug-in now reliably plays the correct notes when a user scale is selected.

  • The Library is now always updated as expected when changing plug-ins while the focus is on the plug-in presets.

  • Parameters set to read-only in Scripter no longer write automation.

  • A Scripter parameter defined as Read-Only will no longer write automation data.

Selection-Based Processing

  • Selection-Based Processing applied to a marquee-selected portion of a looped region now only affects the selected area.

  • Selection-Based Processing now recognises a marquee-selected area that had previously been saved in a newly opened project.

  • When cancelling a Selection-Based Processing operation using Command – Full Stop(.), the Selection-Based Processing channel strip no longer remains in the Tracks Area.

Global

  • Setting the beat grouping in the Transport Display Time Signature menu now works as expected.

  • It is again possible to copy the timecode position of a locked marker.

  • There is now a visible indication when dragging regions from the Tracks area to the Marker Global Track.

  • Command-clicking a marker in the Marker track adds it to the current selection again.

  • Option-dragging a signature again copies it as expected, instead of simply moving it.

  • Zooming with the mouse scroll wheel no longer deselects items in Global Tracks.

  • Command-dragging a marker to the time ruler when the Global Tracks are closed now enables Cycle, as well as setting the locators to the range encompassed by the marker.

  • Dragging markers to the right now works consistently.

  • Logic Pro no longer quits unexpectedly when naming a marker in the Marker track whose name had previously been removed from the Marker List.

  • When a new Time Signature is added, the field for the numerator is pre-selected again.

Exporting and sharing

  • Exported Music XML files are now more compatible with Dorico.

  • Tempo events are now reliably included in exported MusicXML files.

  • The dialogue asking whether changes made to a project shared to GarageBand for iOS should be imported will no longer be shown again if "No" is chosen the first time it is displayed.

  • The File Name Example in the Export Track dialogue now reflects the actual cycle range values when the "Export Cycle range" option is selected and Bar Range is one of the Elements selected for the Pattern.

  • File names for exported tracks that include the Bar Name element are now formatted more reliably and occasionally truncated.

  • It is now possible to bounce with audio tails when the bypass effects option has been enabled.

  • Music XML files exported from Logic Pro now include TAB Staff Styles when opened in Dorico.

  • Bounce-in-place now works for Drum Machine Designer and Drum Kit Designer track stacks.

  • Bounce-in-place now works for MIDI regions on tracks assigned to auxiliary channels receiving input from a multi-out Software Instrument.

Import

  • When importing Final Cut Pro XML projects containing multichannel audio files, Logic Pro now maintains channel assignments reliably.

  • Large Final Cut Pro XML files now load more quickly.

  • Final Cut Pro XML files are now imported reliably with the correct Sub-Role Names.

  • Logic Pro now creates a Summing Stack for each Parent Role when importing FCPX XML files.

  • It is now possible to import content from a track where the currently active Track Alternative is empty, but other Track Alternatives have content.

  • When importing a track with assigned sends and take folder regions, the dialogue for managing the routing of those sends now appears just once, rather than repeatedly for each take, when you choose to re-route a send to an existing auxiliary.

Logic Remote

  • The labels for the buttons that halve and double the delay length in the Stereo Delay plug-in are now labelled correctly in Logic Remote.

  • The Sync Time control in the Tape Delay plug-in is now visible in Logic Remote.

  • Logic Remote now updates the Track display immediately in the Mixer and LCD after the track order has been changed in Logic Pro.

  • Logic Remote now displays all plug-in parameters reliably.

Control surfaces and MIDI controllers

  • The Crumar Mojo controller can now be used to control the Vintage Organ.

Accessibility

  • VoiceOver now accurately states what the Stop/Go to Beginning button will do, depending on whether Logic Pro is currently playing or not.

  • VoiceOver now correctly announces the contents of a cell within the List Editor rather than the title of the column.

  • It is again possible to select a Drummer using VoiceOver.

Score

  • The behaviour of snapping of objects in the Score has been improved.

  • The Toggle View key command in the Score now toggles between all three available view modes.

  • Markers are now displayed in the ruler of the Score even when Global Tracks are hidden.

Editing

  • Adjusting velocity with MIDI Draw now only affects selected notes.

  • Drum names are now displayed correctly in the Piano Roll when zoomed out.

  • The Event List is now updated more quickly to reflect the selection of regions in the Tracks area.

  • The Select Cable Origin command in the Environment now highlights the cable port reliably on the connected Environment object.

  • Paste at Original Position places notes at the expected position again in the Piano Roll.

  • Performing Undo after moving objects in the Environment no longer occasionally causes Smart Controls to be deleted.

  • Horizontal Auto Zoom now sets the correct zoom level reliably the first time it is used in the Piano Roll.

  • It is now possible to record past bar 2000 in the Piano Roll.

  • Logic Pro no longer displays an "Illegal Region Number" dialogue when the Step Editor is opened while an audio region is selected.

  • Scale quantise values set in the Piano Roll are no longer occasionally set to their enharmonic equivalents after the Piano Roll has been closed and then reopened.

  • It is again possible to type a plus symbol (+) and a number to increment the musical position of an event in the Event List.

  • The map in the Environment Transformer edit window is now updated reliably with all Conditions when the operation for Databyte 2 is set to Reverse

  • The Length/Info column in the Event List shows names of Meta events again.

  • Horizontal and Vertical Auto Zoom now work as expected in the Step Editor.

  • The horizontal zoom in the Step editor is now constrained to the project length.

  • MIDI regions that start within a bar are no longer occasionally extended in length unexpectedly when editing notes in the Piano Roll.

  • Right-clicking on the Catch button in the Piano Roll when another window is currently in focus now correctly adjusts the Catch setting for the Piano Roll instead of the focused window.

  • Selecting a note in the Event List no longer causes the view in an open Piano Roll to scroll to the Playhead position instead of keeping the selection in the visible area.

  • The Mapped Instrument and Touch Tracks editors maintain the correct zoom level again when closed and then reopened.

  • The channel splitter object in the Environment no longer sends an unexpected Program Change 0, MIDI CC7 value 0 and MIDI CC10 value 0 message when the channel splitter is selected and MIDI Out is active in the Environment.

  • The Piano Roll no longer continues to show Help Tags when they have been disabled in the Display preferences.

  • Disabling Help Tags in the Display preferences now also applies to Help Tags in the Piano Roll.

  • Using the Increase/Decrease Last Clicked Parameter by 10 key command now shifts the note or notes in the Event List up or down by 12 semitones instead of 10.

  • The Audio Track Editor now updates consistently to display the currently selected Take.

  • Notes in the Piano Roll now return to their original pitches correctly when the velocity has been adjusted after the Scale quantise setting has been changed, then disabled.

  • Rubber-band selecting notes in the Piano Roll with Horizontal Auto Zoom enabled no longer leads to unexpected scrolling.

  • MIDI editors now update the content of SMPTE locked regions when the tempo is changed.

  • The Piano Roll no longer switches off Drum Names display mode intermittently when cycle recording to a Drum Machine Designer track with Merge enabled.

  • The Q button in the Step Input window now lights up to indicate it is active.

  • Note Force Legato now works when the Piano Roll is in One Track view.

  • Clicking below the last line in the Step Editor with the Line tool no longer occasionally causes the region to change in length unexpectedly.

  • Option-dragging multiple selected MIDI Draw points no longer occasionally places the copied points at the wrong position.

  • The time ruler labels in the Audio File editor are now correct after switching from the Audio Track editor.

  • The Physical Input object in the Environment no longer changes in size unexpectedly when other objects are moved.

  • Auto-zoom in the Piano Roll now behaves as expected in projects that start before 1 1 1 1.

  • The Event List displays the correct contents again in the pop-up menu for the Info/Length column when Additional Info is enabled.

  • Catch is now re-enabled consistently by a Go To Beginning command issued after editing MIDI Draw in an Edit window.

General

  • Click-dragging over audio regions with the Fade tool now selects them.

  • The key command to open the Plug-in Manager now works when there is no project open.

  • Audio files dragged into the Tracks area with names that contain a combination of single and multiple digit numbers are now sorted as expected.

  • There is a progress bar again to show copying audio files when performing a Save As operation.

  • Catch Playhead now works reliably when using the Go to Beginning button when the beginning is not in the current view.

  • Key command sets created in Logic 9 work correctly again.

  • Manual vertical track zoom settings are now stored separately for automation on and off views.

  • The Hide All Empty Tracks key command no longer hides the currently selected track if it is empty.

  • When adjusting one of several selected regions in the Project Audio window, the view no longer scrolls unexpectedly to the lowest selected region.

  • The Set Optimal Region Sizes command works again on folders.

  • The Capture Last Take as Recording command now includes data from Smart Controls and the Touch Bar.

  • The Horizontal Auto Zoom command now works correctly with folders.

  • Moving a region in the topmost track at high vertical zoom levels no longer obscures the Bar Ruler.

  • When a file that is being previewed in the Media tab is dragged into the Tracks area, it now stops playing back.

  • Choosing a project from the File > Recent menu while the Startup window is open, with the option "Open Last Project" selected, no longer causes Logic Pro to load the last project in addition to the project selected from the Recent menu.

  • Activating region solo no longer occasionally causes the view to scroll unexpectedly to the beginning of the project.

  • Undo now works after performing the Colour Tracks by Region command.

  • Undo now works after performing Join per Track in cases where one of the selected tracks contains only one region.

  • Performing "Duplicate Track with Content" after performing Undo no longer changes the name of the track and channel strip unexpectedly.

  • Adjusting the left-hand border of an Alias now converts it to a real MIDI region to maintain the timing of events in the edited Alias correctly.

  • Deleting a patch from within a folder in the Patch library no longer moves the focus out of the folder.

  • The Horizontal Auto Zoom in the Tracks Area now only includes the Cycle range if the option Play from Cycle has been enabled.

  • Closing an independent Audio File Editor window no longer removes undo steps for previous audio region edits unexpectedly.

  • The scissors tool now works as expected after scrubbing with it to find the desired edit position.

  • Unpacking folders no longer creates an extra unneeded track for the first region in each folder.

  • The "Reset All Preferences except Key Commands" command now works reliably.

  • The last digit of incoming three-digit velocities is no longer cut off when the LCD has been set to Custom.

  • The Playhead now displays reliably at the correct position when Horizontal Auto Zoom has been enabled, and the window width has been changed.

  • The tab key now shifts the focus correctly from one field to the next in the My Info panel in the Preferences window.

  • It is again possible to set the Freeze mode for a track to Source Only in the Track Inspector.

  • When the down arrow is used to scroll through loops while pre-listening in the Loop Browser, the currently playing loop is now reliably in view when the down arrow has been released.

  • Optimised audio files now include the area covered by crossfades applied to the regions.

  • Printing from the Notepad now defaults to black text on a white background.

  • Moving or copying audio regions no longer occasionally shortens regions unexpectedly to the right of the moved or copied regions.

  • The Trim Region Start to Previous Region command is now available in the Edit menu and the contextual menu.

  • When the Volume Tool has been assigned as the secondary tool in a screenset, switching to another screenset and back no longer causes it to reset to the Pointer tool.

  • When a frozen Software Instrument track is selected, adding a new track no longer results in an unnecessary warning that the track has frozen.

  • It is again possible to toggle the Metronome during recording when the "Only during count-in" option has been enabled.

  • Clicking a region in the Tracks area now moves the focus to the Tracks area immediately.

  • Key commands are now passed through to an open Key Commands window when the Musical Typing window is also open.

  • Global key commands now work reliably when the Tracks area does not have focus.

  • The song length display in the LCD now displays correctly when a value over 999 bars is typed in.

  • Open plug-in windows now remain visible when Logic Pro is switched to full screen.

  • Overlapping audio regions on a track no longer occasionally play back simultaneously with certain crossfade and region gain settings.

  • Double-clicking a region with the Marquee tool and then double-clicking a second region no longer applies the second edit unexpectedly to the previously clicked region.

  • The cursor now changes to the correct tool reliably, depending on its position.

  • External MIDI tracks now follow the "Delay in milliseconds (ms)" track inspector setting accurately when it is set to values below -100ms.

  • The Apple Loops browser now has dedicated tabs for selecting the Instrument, Genre and Moods categories of keyword buttons.

  • Quick Help pop-ups can now appear directly next to areas where the pointer is located.

  • Moving or copying flexed regions on grouped tracks will no longer shorten regions following the edits in some specific scenarios.

  • In the Track Inspector, setting the "Delay in ms" parameter for an external MIDI instrument track to a value lower than -110 ms now delays the track by the amount specified.

  • The No Transpose tick box in the Track Inspector now has just two states, as it should do.

  • The quality of the graphic display of waveforms in the Tracks area is now more consistent across all zoom levels, and when using the Waveform zoom feature.

Logic Pro 10.3.1

New Features/Enhancements

  • Logic now supports the Audio Unit v3 specification for virtual MIDI ports.

Stability and reliability

  • Logic Pro no longer occasionally quits unexpectedly when:

    • The Duplicate Event command is used while a field in the Event List is highlighted.

    • The left-hand corner of an Apple Loop is adjusted on a track with Flex enabled.

    • Dragging dynamics symbols into the Score in large projects.

    • Customising the Toolbar from a Floating Transport window.

    • Changing to another scale from the East Asian scale on the Touch Bar.

    • Changing the I/O Buffer size in a project that has a Groove Track enabled.

    • Save as Default is selected in the Alchemy plug-in window.

    • Dismissing the "Do you really want to create a high-speed section?" dialogue when working with Flex inside a Take Folder.

  • The Piano Roll now displays reliably on Retina displays.

  • Tracks are no longer occasionally removed from Folder Stacks unexpectedly if Solo is used, and then the Mixer is closed and then re-opened.

Performance

  • The interface is now more responsive when time-stretching an audio region by Option-dragging its left-hand corner.

  • Disabling Region Solo with a key command while the Project Audio window is open no longer takes several seconds.

  • Performance is improved in the Project File Browser in large projects.

  • The timing of playback and the position of the playhead are now maintained consistently when trimming the length of audio regions.

  • Logic Pro remains responsive when time-stretching Apple Loops while Varispeed is enabled.

  • The first Undo performed during playback no longer causes a small hiccup in playback.

Alchemy

  • The Magnet Effect in Alchemy now reliably sounds in tune.

Plug-ins

  • Scripter instances that contain code beginning with "NeedsTimingInfo = True" command no longer cause hung notes when Cycle has been enabled in the project.

  • Plug-ins can be opened again from mixer objects in the Environment window.

  • Preset names for Audio Unit v3 plug-ins are now displayed correctly.

Automation

  • It is again possible to edit Region-based Automation on Take Folders.

Fades

  • Applying fade outs to multiple selected audio regions now works reliably.

  • Clicking on a fade with the click zone fade tool no longer occasionally changes its length unintentionally.

Flex

  • Quantising Audio Apple Loops no longer occasionally causes them to change in length.

  • Audio files with existing tempo information that are added to a project with a different tempo now follow Flex correctly.

  • Time-stretching an audio region no longer occasionally creates an unexpected fade out.

  • Audio files that have been bounced in place with the Include Audio Tail in File option enabled can again be Flexed after the Reset All Flex Edits command has been used on them.

Takes and comping

  • Selected MIDI Take Folders can be flattened again.

  • The start positions and lengths of regions in Take folders are no longer occasionally changed when the audio files are converted to a different sample rate.

  • Take folders inside Folder Stacks are no longer occasionally deleted if the Undo function has been performed after using the Unpack to New Track Alternatives command.

Touch Bar

  • The playhead now snaps to bars and beats when it is moved while in the overview mode of the Touch Bar.

  • The Touch Bar overview mode now scrolls vertically to display the currently visible regions, even when the selected tracks are no longer in view.

  • The position displayed by the Touch Bar is now correct in projects that start at positions later than 1 1 1 1.

Track Alternatives

  • Regions on the inactive Track Alternative created by a Duplicate Alternative command are now deselected to stop them being deleted unintentionally.

  • When an inactive Track Alternative is promoted to active, the pre-listen buttons on other tracks that are members of the same group are now clear as expected.

  • Deleting an inactive Track Alternative no longer causes the selected track to shift to Track 1.

  • Track Alternatives can now be created for Guitar/Bass tracks.

  • Global edits that cut or insert time are now also applied to inactive Track Alternatives.

Score

  • The standalone Score window now displays the currently selected regions reliably.

  • There is now a switch to toggle the snapping of Score objects while dragging.

  • Selecting an instrument track that is part of the current Score Set will no longer change the Score Set when Same Level link mode has been enabled.

Drummer

  • Drummer regions in Track Alternatives are no longer converted to MIDI regions when changing Drummer Characters.

Editing

  • It is now easier to drag values in the Event List.

  • Clicking a note in the Piano Roll with the Mute tool mutes the note again immediately.

  • The note length value for a Lane in the Step Editor can be edited again.

  • It is again possible to edit more than one selected event in the Event Float window.

  • The Event List displays GM instrument names again for program changes.

  • It is now easier to divide notes with the Scissors tool in the Piano Roll

  • The Operations on Selected Events map in the MIDI Transform editor again shows the result of operations on the second data byte.

  • It is again possible to edit the MIDI Controller number in the Event List.

  • Lyrics are displayed directly again in the Event List when Additional Info has been enabled.

  • Follow Playhead now works with looped MIDI regions in the Piano Roll.

Sharing

  • Tracks added using the Share to GarageBand for iOS feature now play back correctly in cases where the sample rate for the Logic Project is not 44.1 kHz.

Import

  • Take Folders on inactive Track Alternatives are now included when importing a track into a project.

  • It is now possible to import/replace a track that resides inside a Track Stack.

Inter-app operability

  • Logic Pro no longer changes ReWire bus numbers in existing projects to 60.

  • Logic Pro's playhead and locators follow the position of connected ReWire applications again.

Video

  • Changing a project’s frame rate no longer causes the SMPTE start time to shift unexpectedly.

  • Key commands now work reliably when a floating Video window is open.

Control Surfaces/MIDI Controllers

  • Sliders, pan knobs and track names are now updated reliably in Logic Remote when Logic Pro is relaunched.

  • Logic Control can be used again to shift the Cycle position.

General

  • Performing a Cut (Command-X) when there is a marquee selection now creates an Undo step as expected.

  • The New Position field in the Go To Position window shows the last entered position again when it is re-opened.

  • The Marquee tool can be used again to divide multiple regions.

  • Software Instruments output audio as expected again when Varispeed Speed Only is active and Low Latency Mode is off.

  • When Normalising parameters on MIDI regions with a negative Velocity offset, notes that have velocities smaller than the offset are no longer set unexpectedly to 127 instead of 1.

  • Dragged regions no longer move to incorrect positions in certain rare cases on macOS Sierra.

  • The end of a reversed audio region that has been shortened can be extended again.

  • Input monitoring works again when Varispeed has been engaged.

  • Names of Aliases are displayed again with an italic font.

  • The Select Unused command works again in the Project Audio window.

  • The Score parameter in the Region Inspector shows the Show or Hide status of the region again.

  • Using the close button to hide inactive Track Alternatives now creates an Undo step.

  • Sustain pedal events are now triggered correctly on looped MIDI regions.

  • The pointer becomes the Loop tool again consistently when the lower right-hand edge of a flexed region is grabbed.

  • The appearance of fonts on non-retina displays has been improved.

  • Auxes that are saved in a Track Stack as part of a Patch retain their custom-assigned colours again when the Patch has been loaded.

  • Record-enabling and disabling multiple selected audio tracks works again as expected.

Logic Pro 10.3

New features and enhancements

  • Support for the Touch Bar on MacBook Pro.

  • Track Alternatives let you create and switch between different playlists of regions and edits on a track.

  • Render any combination of effect plug-ins to a selection of audio using Selection-Based Processing.

  • Share to GarageBand option allows you to add new tracks to your Logic Pro project remotely from your iPhone or iPad via iCloud.

  • New region editing design reveals waveform for entire audio file, or unused MIDI data, while trimming.

  • True stereo panning provides more control and discrete manipulation of stereo signals.

  • Projects can now contain up to 256 buses.

  • Logic Pro now offers a 64-bit summing engine.

  • Import Music XML files.

  • Insert plug-ins as either stereo or dual mono on stereo tracks.

  • Expanded colour palette offers 24 more colours to label your regions, tracks and notes.

  • There is now a key command Create New Track with Duplicate Settings and Content. The same action can be triggered by Command-clicking the New Track with Duplicate Settings button in the track header.

  • The I/O plug-in now has a Mix control.

  • There is a new Recording page in the preferences window, which now has the settings for Overlapping recordings, recording file type and recording bit depth.

  • There are now key commands to move the locators forwards and backwards by one bar.

  • There is now a control for horizontal auto-zoom in the Main window, Piano Roll, Audio Track Editor and Step Editor.

  • There is now a key command to create a new Arrangement Marker.

  • There are now key commands to toggle the disclosure of the currently selected track stack, or all track stacks.

  • There are now key commands to create a new project alternative and to edit the current alternative.

  • There is now a preference setting to adjust the brightness of the backgrounds in the Tracks area.

  • There is now a key command to close Track Stack folders on the currently selected track.

  • There are now key and menu commands to apply the last fade edit to selected regions.

  • Key commands can now be used to apply one of up to 30 Transform User presets.

  • There is now a command Move Video Region to Playhead, available as a contextual menu item and key command.

  • It is now possible to set the sample rate when creating IRs in the Impulse Response Utility.

  • There is now a key command Repeat as Alias.

  • Disk Space management is now fully supported on macOS Sierra.

  • There is now a key command Show Video in Finder.

  • There is now a key command Diatonic Insert in the Score window.

  • There is now a key command for Apply Default Crossfades.

  • There is now an option in the Overlapping Recordings preferences to select between replacing MIDI regions, or just the content within existing regions when recording in Replace mode on MIDI tracks.

Stability and reliability

  • Logic Pro no longer occasionally quits unexpectedly when:

    • Switching between two open projects.

    • You remove all the categories from the Plug-in Manager.

    • You choose a different Apple Loop from the same loop family inside a MIDI Take folder, and then the Take folder is flattened.

    • Adding compressed audio files to tracks.

    • Closing a project while in full-screen mode.

  • Logic Pro no longer hangs if the Populate with Drummer Regions command has been performed on songs that are 30 minutes or more in length.

  • Logic Pro no longer occasionally hangs when selecting mounted drives from the Alchemy Sources > Import Audio pop-up menu.

Performance

  • There is no longer a slight lag when record-enabling a track in the Mixer.

  • Loading EXS instruments that use compressed audio files is now considerably faster.

  • Logic Pro now takes less time to quit.

  • Logic Pro now correctly sets Processing Threads to the maximum number of cores on MacBook Pro (late 2016).

  • Moving a marker while playing back no longer occasionally causes clicks in the audio output.

  • Scrolling performance in large projects with a large number of regions has been improved.

  • Selecting the previous or next track with the Up and Down arrow keys is no longer slow with Automation view enabled.

Alchemy

  • Alchemy's LFO waveshape display now updates as expected after loading an LFO preset.

  • Alchemy Modmaps with Y Snap set to 1/12 now correctly snaps nodes to 1/12 increments.

  • In Alchemy, if a sample is imported to Source A using Sample mode and then the same sample is imported to Source B, C or D using Granular mode, disabling Source A no longer leaves the other Source position stuck at 0.

  • A double-click is now required to edit the text below a Performance Control.

  • The last folder used to import audio into an Alchemy Source is now remembered after the File > Clear command has been used.

  • Right-clicking Auto-assign on an Alchemy Performance Control now reliably assigns only that control.

  • Improves the tuning of several Alchemy presets.

  • Option-clicking again on a curved ADSHR segment in Alchemy immediately affects the control segment and makes the linear decay stage audible.

  • The post-modulation feedback ring around Alchemy’s arpeggiator pattern knob now continues to update after it has been adjusted manually.

  • Assigning the modwheel to control a parameter in Alchemy no longer removes the modwheel assignment in the Performance section.

  • Alchemy’s Spectral Editor now saves a separate undo step per source, and if there is no undo step available, the Undo button is now dimmed.

  • Notes being held in Alchemy while switching VA oscillator wave shapes now continue to sound as expected.

  • Alchemy now offers Downsample as an option for Source, Master and Multimode filters.

  • Changing a point in Alchemy’s Envelope Editor now correctly updates the Partials display.

  • The Alchemy arpeggiator now offers an Input Snap setting that quantises incoming MIDI notes to the rate when Logic Pro is running.

  • When an external controller is used to adjust Alchemy’s AHDSR, the curve now updates visually immediately in the plug-in.

  • Import of MIDI files to the Alchemy arpeggiator is improved.

  • It is again possible to load Alchemy .acp files from the plug-in Load file menu.

  • It is now possible to auto-assign all ADSR Performance controls to the same envelope with one click in Alchemy.

  • Alchemy now displays values when adjusting grain size in increments smaller than one millisecond.

  • Alchemy now responds consistently to channel and polyphonic pressure.

  • Performing Undo after loading a Patch no longer causes instances of Alchemy that have been modified since the project was last saved to reset unexpectedly to the saved state, or to the default state if the project has never been saved.

  • Audio quality of Apple Loops imported into Alchemy has been improved.

  • Alchemy’s LFO selection menu now lists the LFO number and its currently configured waveform.

  • The first note played into an Alchemy instance no longer occasionally causes an unexpected spike in CPU usage.

  • Autosave now works for Alchemy.

  • A scroll bar is now shown consistently in Alchemy’s Browser preset list in Simple mode.

  • Alchemy now loads presets that use AAZ files more quickly.

  • Alchemy Mod maps assigned to controls that operate in semitone values now default to snapping to single semitone increments when adjusted.

  • Alchemy sounds with the Additive Magnetic Effect modulated by Key Follow now play reliably in tune.

  • Changing the VA waveform from the source menu now correctly resets the groups in cases where the source contains multiple groups.

  • Formant analysis now gives good results on samples at sample rates other than 44.1 kHz.

  • Quick Help now works with Alchemy.

  • Controls labelled "Add FX" or "Spec FX" in Alchemy now respond to MIDI learning in the Learn page.

Accessibility

  • Plug-ins open in Controls View by default when Voiceover is active.

  • VoiceOver now announces the position of the Playhead correctly when the timeline has been set to display Hours:Minutes:Seconds:Samples and SMPTE/EBU with Samples.

  • The Pitch Correction slider in the Audio Track Editor is now announced by VoiceOver.

  • The Audio Track Editor Quantise Strength slider is now announced by VoiceOver.

  • The Audio Track Editor Transpose Slider is now announced by VoiceOver.

  • Improved accessibility to Alchemy parameters in Controls view.

Automation

  • Region-based automation can now be written to Apple Loops.

  • SMPTE Lock now applies to region-based automation events.

  • When the Insert Silence command is used, automation to the right of the inserted area is now moved as expected even when the Move Automation preference is set to Never.

  • When joining two regions, MIDI draw nodes from the first region are no longer eliminated if the first node in the region is before the region start.

  • Deleting Pitch Bend events now also reliably deletes all associated interpolated Pitch bend events.

  • Splitting or joining regions with MIDI Draw CC nodes no longer occasionally causes unexpected extra CC events to be created.

  • Logic Pro no longer creates unneeded temporary regions if automation view is active and faders are moved while recording MIDI.

  • It is now possible to automate Send on and off.

  • The commands to create automation nodes at region borders now applies to all regions of an active track group.

  • It is now possible to rubber-band select automation across multiple tracks.

  • Track automation to bypass plug-ins now continues to work correctly after the plug-in has been moved to a different slot.

  • MIDI Draw in the Score now correctly handles regions with events on different MIDI channels.

Drummer

  • When a Track Stack contains a Drummer Track, you can now set the Follow feature so the Drummer track follows the other tracks in the stack.

  • Dragging a MIDI region onto a Drummer track and then performing Undo now recovers the deleted Drummer regions, as well as moving the MIDI region back to its original location.

  • Drummer regions that are followed by a MIDI region are now regenerated correctly when switching Drummer characters.

  • It is no longer possible to drag non-drum or percussion loops to the Drummer track.

  • The Junction tool now works with Drummer regions.

  • It is now possible to disable display of icons on Drum Machine Designer pads.

  • Adjusting the kick and snare pattern of a Drummer region no longer occasionally affects a region that is a copy of the region being edited.

  • Swing is now calculated correctly for electronic Drummers when the Half Time Kick and Snare pattern is chosen.

  • If a Producer Kit has been loaded for an acoustic Drummer track, changing Drummer characters now loads the corresponding Producer Kit for the character.

Flex

  • Flex Pitch has been improved to reduce the potential for artefacts when setting notes to perfect pitch.

  • Apple Loops in projects with sample rates higher than 44.1 kHz now play back at the correct speed when Flex is enabled on their tracks.

  • Option-clicking on the Formant Shift control in the Audio Editor with Flex Pitch enabled now sets its value correctly to 0.

  • The Flex Pitch "Set to Perfect Pitch" command now works for all selected regions.

  • Transients in Apple Loops are now calculated and displayed correctly in the Audio File Editor.

  • Undo now works correctly after editing transients in Apple Loops.

Takes and comping

  • It is now possible to glue Take folders together.

  • The Fade tool now works on regions in open Take folders.

  • Right-clicking on a Take folder that contains no comps now shows only one listing for each take in the folder.

  • All tracks in a Phase-locked edit group now follow comp edits correctly in cases where the edit spans discontinuous comp segments.

  • The regions that result from unpacking a Take folder are now named correctly.

  • It is now possible to copy and paste Take regions.

  • Capture Recording now creates Take Folders correctly when the Recording Preferences for MIDI are set to do so.

  • The Region Inspector no longer shows a non-functional Mute tick box when a take region has been selected.

  • Option-clicking a Takes region with the Marquee tool now selects it as expected.

  • Applying the key command Create New Comp during playback no longer mutes output of the track.

  • Selecting the menu item to Flatten Takes on a Take folder now performs the operation on all other selected Take folders as well.

  • Logic Pro no longer occasionally creates new tracks if the Recording > Create Takes preference enabled and MIDI is sent while recording audio.

Track Stacks

  • Duplicating a track stack that contains audio channel strips with default names no longer creates a track stack channel strip with the same default names as the originals.

  • When a selected Track Stack is Command-clicked, all tracks inside the stack will now be deselected.

  • Shift-clicking a closed Track Stack now reliably selects all the sub-tracks it contains.

Plug-ins

  • Plug-in side chain menus now display full routing information for buses, as is done on channel sends.

  • The Feedback value in the Stereo Delay is now maintained correctly if the Routing is changed from Straight to another preset and then back to Straight.

  • A plug-in’s Compare button is now activated when a parameter is changed by a MIDI hardware controller mapped to a Smart Control.

  • Changing parameters in the Exciter plug-in during playback no longer causes audio artefacts.

  • Signal passing through a Compressor side chain set to SUM is now at the correct level.

  • Audio Unit plug-in windows no longer occasionally get stuck at a certain position on the screen.

  • If a plug-in produces latency, the help tag shown when hovering over its plug-in slot shows the amount of latency the plug-in is producing.

  • External mod wheel events no longer occasionally cause unintended percussion retriggers in the Vintage Organ instrument when it is in morph mode.

  • Timing for the ProcessMIDI() function in the Scripter plug-in has been improved.

  • Multi-Output Audio Unit instruments set to output to multiple mono Auxes no longer skip output 2.

  • When a voice is dragged from the Ultrabeat import sheet to an instrument slot, the slot now shows the name of the imported voice.

  • The Peak readout in the Multimeter and Level Meter now continues to work after switching from True Peak to RMS mode.

  • The Phase knob is now dimmed as expected in mono instances of the Phaser plug-in.

  • Audio Unit software instruments that support both mono and surround can now be loaded as multi-mono instruments.

  • Multichannel Gain and BPM Counter plug-ins now have updated user interfaces.

  • The Modifier MIDI plug-in can now process Program Change messages.

  • Reordering effects in the Vintage Clav plug-in on macOS Sierra no longer occasionally leaves the effects tiles overlapping one another.

  • Deselecting the Dcy tick box for Groups in the EXS Instrument Editor now disables decay for the Group when Trigger = Key Release.

  • MIDI plug-ins can now remote control any automatable plug-in parameter on the same channel strip.

  • Scripter instances that use the Arpeggiator script now bounce in place as expected.

  • A list of up to five of the most recently used plug-ins now appears at the top of the plug-in menu.

  • The sustain pedal now works consistently when controlling the Latch button in the Arpeggiator plug-in while in Add Temporarily mode.

  • In the Arpeggiator, there is now an option to create a region from the source material rather than the arpeggiated result.

  • Loading patches that contain an instance of the Bass Amp Designer plug-in no longer occasionally causes a popping noise.

  • If a plug-in has been renamed in the Plug-in Manager, the help tag now shows the edited name of the plug-in when hovering the pointer over it.

  • The stereo version of the I/O plug-in now offers an option to send and receive mid/side signals.

  • Pitch bend range is now adjustable in the EFM1 instrument plug-in.

  • The Modulator MIDI plug-in now offers a 1/128 LFO rate.

  • Undoing the loading of a patch no longer causes samples on other Kontakt instruments to be reloaded unexpectedly.

  • Changing the sample rate no longer occasionally causes unexpected changes to the sound of the Flanger, Chorus, Vintage Clavinet, Retrosynth, and the Pedalboard Chorus and Flanger plug-ins.

  • The Plug-in Manager no longer allows duplicated custom plug-in names.

  • Changing the Software Instrument plug-in assigned to a track no longer causes controller data on the track to be deleted.

  • Space Designer can again load plug-in preset files saved to custom locations in Logic 9.

  • Plug-ins inserted while Logic Pro is recording now become functional when recording has stopped.

  • Plug-in parameters that are controlled by fader events from the Scripter plug-in now remain functional if the order of plug-ins in the channel strip is changed or new plug-ins are inserted.

  • Renaming a category in the Plug-in Manager no longer causes the category to move to the bottom of the list unexpectedly.

  • A keyboard set to Multi in the Vintage B3 Organ Split view now maintains the setting when the view is changed to Presets or Controls and then back to Split.

  • The grid in Delay Designer now remains visible when an instance of the plug-in is opened a second time.

  • Third-party Audio Unit plug-ins now display meters correctly in Controls View.

  • Typing in values to parameters in third-party Audio Unit plug-ins in Controls View now works reliably.

  • The Mic Position in Amp Designer is now easier to adjust without inadvertently closing the position display.

  • The sustain pedal now works as expected with the Vintage Clav in the Plectratone, Dulcitone and Belltone modes.

  • Adjusting the Attack, Hold or Release time with the scrubber in RetroSynth or MIDI Modulator’s ENV display now reliably updates the envelope points in the display.

  • Enabling Constant Mod in the Modulation Delay no longer causes the Delay and Modulation settings to increase.

  • Logic Pro now supports Audio Unit v3 plug-ins.

Mixer

  • The New Track with Next Channel command now retains the input setting from the currently selected track.

  • Level meters on surround channel strips in the Mixer and Track Header no longer get stuck when playing back a stereo region.

  • Creating a track stack from tracks that are routed to an Aux that has already been assigned to a track now maintains the routing to the existing Aux correctly.

  • The routings of sub-tracks in a summing stack that have outputs routed outside the stack will be duplicated correctly when copying the summing stack.

  • It is again possible to select a single Folder channel in the Mixer.

  • Tracks created inside a Summing Stack by clicking the + button in the Track Header are now routed correctly to the summing bus.

  • It is now possible to copy/paste only the plug-ins or only the sends of a channel strip.

  • Control-clicking a mixer channel strip no longer deselects multiple selected channel strips unexpectedly.

  • Buses are now listed by name rather than by number when the Send or Output slot has been clicked.

  • Bus labels in the Send and Output menus now show the assigned routing.

  • Buses used for track stack routing are now grouped in a sub-menu labelled with the name of the stack.

  • When multiple channel strips are selected, Option-clicking a fader or control on one channel will set the control to its default state on all selected channels.

  • It is now possible to create a new VCA when all tracks have already been assigned to existing VCAs.

  • In cases where multiple channel strips are selected in the Mixer, but only one is selected in the track list, adjusting controls in the Track Header or Channel Strip Inspector will only affect the selected track. Adjusting controls in the Mixer will continue to affect all channel strips selected there.

  • Creating a surround audio track while the Patch Library is open no longer creates a mono signal path.

  • It is now easier to rubber-band select the bottom of channel strips in the Mixer without inadvertently moving the faders.

  • Software instruments can now be used directly as Side Chain inputs.

  • Auxes created from a surround channel strip are now configured as surround.

  • When assigning channel strip inputs to buses, the labels for buses that have already been assigned are now displayed consistently.

Global Tracks

  • The Insert Snipped Section at Playhead command now maintains the key signature correctly after the inserted section in cases where the inserted section contains a different key signature.

  • Transients in the Beat Mapping track are now displayed in their correct positions after the anchor position in the audio file has been changed.

  • The Replace by Average command in the Tempo Track can now be assigned to a key command.

  • Tempo events with non-integer values are no longer rounded to an integer value when moved to a different time position.

  • The Glue tool now works on Arrangement Markers.

  • Editing the time signature in the LCD now changes the current time signature rather than adding a new one at the current playhead position.

  • The Beat Mapping track is now updated immediately when an audio region’s anchor position is changed.

  • Groove match tracks now maintain their quantisation reliably when an Arrangement marker is moved.

  • The Select All Following command now only selects tempo events that follow the current selection.

  • Time signature changes are now displayed correctly in the Piano Roll and Audio Track editor.

  • Markers Sets can be deleted again from the Global track Marker Sets menu.

  • In order to reduce the accidental creation of markers, the feature that enables markers to be created by dragging an active Cycle down to the lower half of the bar ruler now requires the action start from within the Cycle range.

  • It is now possible to open the Key Signature editor from the Global Signatures track at low vertical zoom levels.

  • It is again possible to rubber-band select multiple points in the Tempo track and drag or copy them to a new position.

  • Select All now includes all events in open Global Tracks.

  • Changing the Time Signature in the LCD inserts the new Time Signature again at the bar containing the current Playhead position.

Editing

  • When the Select All Following command is used in an editor, markers are no longer unexpectedly selected as well.

  • The command MIDI > Separate by Articulation ID now names the resulting tracks based on the articulation IDs if names are available for them.

  • MIDI recordings merged to an existing region using the Capture as Recording command no longer deselect the merged region.

  • It is now possible to unlock SMPTE locked events in the Piano Roll.

  • Adding MIDI Draw data in the Piano Roll no longer occasionally places the new point at the Playhead, instead of the clicked position.

  • The repeat function now works for Marquee selections, and for Time Handles in the Piano Roll.

  • If the playhead is within the bounds of a selected region, a Piano Roll area or window with Content Link mode enabled will show the area around the playhead consistently.

  • If Catch Playhead in the Piano Roll has been turned off because a region away from the Playhead was selected, it is now turned back on automatically if a region within the range of the Playhead has been selected.

  • Clicking on the Quantise Strength or Quantise Swing slider without moving it in the Piano Roll no longer causes MIDI data to jump to quantised positions.

  • Notes created with the Pencil tool in the Piano Roll now match the MIDI channel of the previously created note.

  • The Piano Roll no longer unexpectedly scrolls vertically when toggle recording in cycle mode with drum names displayed.

  • If regions from both a locked and unlocked track are visible in the Piano Roll, "This track is protected and can't be changed" no longer appears when adjusting a note from the unlocked track.

  • The Piano Roll display now behaves as expected during recording when the Link button is disabled.

  • When a Piano Roll is opened after recording, the view now positions and zooms automatically to show the recorded content.

  • It is now possible to adjust position and length by samples in the Event List when Display Time is set to SMPTE/EBU with Samples and the Event List is set to display Length and position as time.

  • Applying quantise to SMPTE locked notes in the Event List no longer causes them to shift unexpectedly in position or length.

  • Setting the start times of multiple selected regions in the Event List now sets the starting times correctly.

  • It is possible to use Shift-Option again to set multiple selected events to the same value in the Event List.

  • Editing using the + or - keys to adjust the last clicked value in the Event List now affects the correct field reliably.

  • The Event Float window now shows SMPTE time when the Event List is set to show Event position and length as time.

  • When an Event Float window is open, key commands meant for other areas now work correctly.

  • The text tool now works in Flex Pitch view in the Audio File Editor.

  • Using the disclosure triangle to close a group in the Project Audio window no longer closes the disclosure triangles for all the audio files inside the group.

  • It is now possible to start a rubber-band selection below the lowest lane in the Step Editor.

  • The counter that shows the number of selected events in the Step Editor is now updated immediately when the selection is changed.

  • Automatic Lane Sets for the Step Editor are now available in all templates.

  • The region header in the Audio Track editor now only shows regions for the selected track.

  • When choosing patches in a Multi Instrument, the patch names for the currently selected bank are now displayed correctly.

  • It is no longer possible to create objects on the Environment All Objects layer, which could lead to non-functional objects.

Export and rendering

  • When bounce in place is performed to a new track with the option to bypass plug-ins, the side chain settings for plug-ins are maintained on the new duplicate track.

  • Bouncing a multichannel software instrument now mutes all the source regions for the bounce correctly.

  • When a project is exported as a MIDI file, alias regions and loops are now included.

  • Export Selection as MIDI File now remembers the last export location used in the current session.

  • Logic Pro now exports Final Cut Pro XML version 1.5 files.

  • Logic Pro now creates 16-bit Apple Lossless files when the PCM bounce option is set to 16-bit.

  • In projects that start at a position other than 1 1 1 1, exporting a section of the project now exports the correct section.

  • Creating an Apple Loop from a region no longer disables the Normalise setting unexpectedly in the Bounce Project dialogue.

  • Includes several improvements when exporting MusicXML files.

  • Bouncing a surround mix while a stereo audio device is active now results in a surround bounce.

  • When Bouncing in Place to a new track, the newly created track now contains the same VCA assignment as the original.

  • There is now an option to export a selection as an audio file.

  • Bounces that include an area of silence no longer occasionally contain a loud click at the start of the silent portion.

  • Apple Loops can now be converted to CAF files.

  • Exporting Multi-output instruments that use Auxes no longer adds signal unexpectedly from the Auxes to the main track for the instrument.

  • Bounced regions now maintain user-created names reliably, and when added to a track, the track is named after the region, as expected.

  • When exporting tracks, regions or selections as audio files, various new options allow custom file names to be set up.

Import

  • The LCD now shows the correct time signature reliably for MIDI files that are opened directly by Logic Pro.

  • When a MIDI file is opened as a new Logic Pro project, the time signature information from the MIDI file is now included.

  • B-format surround files can now be dragged and dropped into the Impulse Response Utility.

  • Logic Pro can now import Final Cut Pro XML version 1.6 files.

  • Compressed audio files that are auto-converted to PCM are now converted to the audio file recording type.

  • Logic Pro now handles AAF or OMF files that contain tracks with special characters in their names correctly.

  • Music Memos files imported into a project at a sample rate higher than 44.1 kHz are now converted to the project sample rate.

  • Importing tracks from other projects during playback no longer causes audio tracks to stop outputting sound.

  • When importing a large FCPX XML file, Logic Pro now shows a progress bar.

  • When importing an FCPX XML file with multiple missing assets, there is now an option to Skip All Missing files.

  • Imported FCPX XML files no longer occasionally have a large number of extra unneeded tracks.

  • Improves conversion of .LSO files from previous Logic Pro versions.

  • Writing tempo information to audio files exported from Pro Tools no longer results in a burst of white noise.

Score

  • Score symbol meta events for all staves now display in Explode Polyphony view.

  • The contextual menu for assigning colours to notes in the Score now displays the actual colour as well as its name.

  • Multiple Score Sets can now be selected simultaneously.

  • It is again possible to remove an extension from a chord symbol in the Score.

  • Undo now works for chord symbol changes in the Score editor.

  • Notes inserted into the Score with the Pencil in MIDI takes now show up immediately in the Store track view.

  • Manually degenerated line breaks are now maintained when the zoom level is changed.

  • In cases where a No line break object is placed at the end of the last region in a track, Page view for the region no longer incorrectly shows unexpected extra brackets with no staff from the end of the region to the end of the project.

  • It is now possible to insert score symbols to multiple selected regions by pressing Shift while dragging.

  • When an independent or grace note is inserted at the same position as the first non-independent note after a Clef change, the independent note is now affected by the Clef.

  • The Score is now updated immediately to show changes in selection using the arrow keys.

  • Dragging the Playhead in a Score window set to linear view now snaps to the Ruler as expected.

  • There is now a guide line that appears to show when symbols being dragged into the Score are vertically aligned with existing symbols.

  • Chord grids are now shown at their correct size as they are being dragged into the Score.

  • The Score project setting Time Signatures: Hide All now works correctly to hide user-created time signatures.

  • Right-clicking on Text and Lyrics in the Score now brings up a contextual menu offering options to align the text, adjust fonts and set the text style.

  • It is now possible to drag instruments to new positions in the Score Sets window.

  • Time Signatures are no longer displayed as too large in Pager view at zoom levels above 150%.

  • The score window no longer displays unexpected duplicate key signatures in certain rare cases.

  • Courtesy Signature changes are no longer displayed occasionally to the right of the end of the staff lines.

  • Manually inserted Clef signs are no longer displayed occasionally to the right of the end of the staff lines.

Control surfaces and MIDI hardware

  • Faders and buttons on EuCon control surfaces are now updated correctly when quitting Logic Pro.

  • The Control Surface Install window now shows supported MIDI hardware controllers.

  • The Arturia KeyLab 25 is now a supported MIDI hardware device.

  • Logic Remote now includes access to several previously missing parameters in the MIDI Arpeggiator, EFM1, ES1, ES2 and EXS24 plug-ins.

  • Logic Remote now shows controls for MIDI Mono Mode and Pitch Bend Range on EFM1.

  • Logic Remote now shows controls for MIDI Mode and Filter Boost on ES1.

  • Logic Remote now shows controls for MIDI Mono Mode and Pitch Range on ES2.

  • Logic Remote now shows controls for MIDI Mono Mode, Pitch Range, LFO Triangle Shape and Prev/Next Instrument.

  • Logic Remote’s track selection arrows are now updated correctly when tracks are dragged to new positions in Logic Pro.

  • Pressing Save As on Logic Remote while Logic Pro already has an open Save dialogue no longer causes multiple unwanted Save dialogues to appear.

  • Selecting the Stereo Out channel strip in Logic Remote no longer selects an unexpected track in Logic Pro.

Video

  • It is now possibly to scale the size of a video window automatically by double-clicking its header.

  • A long click on a video thumbnail now reveals the video's position.

  • Export Audio to Video with the AAC format selected now works reliably after the first export.

  • Videos with MPEG2 or AC3 encoded audio tracks can be loaded into Logic Pro projects again.

  • Manually punching in and out in Replace Mode with Cycle on now erases the existing region as expected.

Synchronisation

  • MIDI Clock is now transmitted at the correct time when Logic Pro is in Low Latency Mode.

MIDI

  • In cases where there are more than 64 MIDI input ports on the Physical Input, MIDI coming into port 65 or higher is no longer routed incorrectly to port 1 and up.

  • The timing of MIDI tracks sending MIDI externally has been improved.

Sounds and content

  • The selection in the Sound Library no longer occasionally jumps unexpectedly when using the arrow keys to stop through sounds for Drum Machine Designer kit pieces.

General

  • If the Time Ruler has been set to show time, its format now reflects the Display > General > Show Time As preference setting.

  • It is possible to automate plug-in parameters again on tracks that are frozen in Source Only mode.

  • A right-click on a Marquee selection no longer divides the selection unexpectedly.

  • It is now possible to select multiple Alternatives in the Edit Alternatives window.

  • The Done button in the Project Audio’s Add Audio File dialogue no longer changes to Add if some files are selected and then removed from the list of files to be added.

  • The state of individual disclosure triangles in the Inspectors is now maintained if the Inspector is hidden and then shown again.

  • The SMPTE time shown in the LCD display now matches the SMPTE time shown in the Tempo Editor and Tempo Operations window.

  • The Record Ready buttons in the Tracks area now blink in sync reliably with the corresponding buttons on the Mixer.

  • The options shown when pressing the Export button in the toolbar now match those shown when choosing File > Export from the main menu.

  • A separate zoom memory is now maintained for each window in cases where multiple windows of the same type are open.

  • If a folder that contains a single track is selected in the Tracks area, editors that have content-link enabled now show the contents of the track.

  • Dragging a track to a position next to a summing stack no longer occasionally places it incorrectly inside the summing stack.

  • Packing tracks that are inside a stack into a folder no longer creates an unneeded copy of the main track of the stack inside the folder.

  • When a Main window is closed, the Snap Regions to Relative Value vs Snap Regions to Absolute Value setting is now maintained when a new Main window is opened.

  • The settings chosen in the Notes Crossing Split Point dialogue, the Paste on Multiple Tracks dialogue and the Set All Tracks to Write dialogue now persist after relaunching Logic Pro.

  • A marquee selection that starts at the left edge of a MIDI region and splits a note now correctly triggers the Notes Crossing Split Point dialogue.

  • The labels for ticks in the Time ruler now follow the Division format setting.

  • Using the Fade tool on a track assigned to a phase-locked editing group now applies the fade to all tracks in the group.

  • Capture Recording now merges correctly with existing regions when the Project Recording setting for Cycle mode is set to Merge.

  • Deleting a track no longer also deletes Auxes that were added to the project with the track as part of a patch, if the Auxes have been assigned to tracks in the project.

  • Undoing the creation of a Drum Machine Designer instance now works correctly.

  • The MIDI region transpose setting is no longer unexpectedly reset to 0 after creating an overlapping MIDI recording in Merge mode.

  • Cancelling the division of a MIDI region by Marquee selection no longer causes the region to be deleted occasionally.

  • It is again possible to toggle the Metronome click on and off during audio recording when the Metronome is in simple mode.

  • The Fade tool now works reliably to create fade-outs on grouped tracks, regardless of the zoom level.

  • The correct order of tracks is now reliably maintained when recording multiple passes of several tracks in cycle mode with the Create Tracks or Create Tracks and Mute recording option.

  • It is now possible to load an alternative or backup by double-clicking it in the Select Alternative and Backup dialogue.

  • Performing Undo after using Repeat in the Main window now maintains the region selection.

  • Values in the Region Inspector can be set to their defaults again by highlighting and deleting them, and then pressing Return.

  • Snap to zero crossings now applies when audio regions are divided by cutting with the Scissors tool, clicking on a Marquee selection, double-clicking a Marquee selection or Region trim.

  • When record-replacing audio in cycle mode, the region to the right of the cycle area is no longer selected occasionally when recording is stopped.

  • Performing undo after dragging a plug-in to a different channel strip no longer also undoes the last parameter change applied to a plug-in.

  • MIDI regions created by punching in manually on top of an existing region in replace mode now play back as expected.

  • The Apple Loop variation drop-down menu no longer occasionally shows unrelated loops with similar names.

  • Regions moved by using the Move to original record position command no longer overlap other regions occasionally if No Overlap mode is active.

  • Replace mode is now automatically deactivated if the Replace button is removed from the Control Bar.

  • It is now possible to open a Project settings window while a Preferences window is already open.

  • The key commands to zoom individual tracks now apply to all selected tracks.

  • Data is now placed at the correct position when the Paste at Original Position command is used in projects that start at positions other than 1 1 1 1.

  • It is now possible to copy/paste Group settings.

  • Undo is now possible after performing the Name Tracks by Region Name command.

  • It is no longer possible to drag the Marquee selection to a point earlier than the project start.

  • A region copied from a position earlier than 1 1 1 1 is now placed as expected at the position chosen.

  • The Remove Overlaps command no longer fails to work in certain rare cases.

  • Copying a region to the left of a Take folder no longer occasionally causes the Take folder to be deleted unexpectedly when No Overlap mode is active.

  • It is no longer possible to change the lengths of regions inside a closed Track Stack inadvertently.

  • The Project Management > Cleanup command no longer removes audio files that belong to other Project Alternatives.

  • When duplicating a track with its content, the new track now contains copies of the original regions instead of aliases.

  • The Play from Selection key command now responds to selected Flex pitched notes in an audio region.

  • Zoom to fit key commands now work correctly when used on a marquee selected area.

  • When splitting a region with Clip Length on that contains MIDI CC data that is all to the left-hand side of the split, the new region to the right of the split point now includes a MIDI CC message of the correct value to ensure it plays back the same as before the split.

  • Crossfades can now be applied to multiple selected regions by swiping from right to left.

  • Fade in and Fade outs can now be applied to multiple selected regions on the same track with the Fade Tool.

  • Undoing the creation of an Audio track no longer occasionally leads to the unexpected selection of a track inside a closed stack.

  • Using the Record repeat key command no longer occasionally causes recently recorded regions to be deleted if the track volume is adjusted during recording.

  • Dividing an audio region in which the region Anchor is not placed at the beginning no longer occasionally causes an unexpected gap between the two resulting regions.

  • It is again possible to set the audio input device to None.

  • Glueing interleaved surround regions no longer results in a mono file.

  • It is now possible to navigate the options in the Startup dialogue using the down and up arrow keys.

  • It is now possible to set a default configuration for the Track Header.

  • When Select Unused is chosen in the Audio File Browser, deleting the files only deletes files that are not being used in any other project Alternatives. Files used by an Alternative are removed from the current Alternative’s Audio File Browser, but are left on the hard drive.

  • The Option key can now be used to access the Loop tool when track automation is visible.

  • The Recent Projects list in the file selector now shows projects saved to iCloud.

  • Zoom to Fit now works correctly when track automation is visible

  • Plug-ins can now be inserted while playing when Quick Punch-In is active.

  • Automatically generated crossfades no longer disappear when adjusting the left-hand region border.

  • Pickup Clock now moves note events to the proper position after the left-hand corner of the region has been changed.

  • The Musical Typing window no longer closes when Command – W is pressed while another window has key focus.

  • Catch is now disabled when making a Marquee selection.

  • When regions are grabbed in the tracks area, the help tag now shows the number of regions selected.

  • A long click on the border of a region no longer creates an unexpected Undo step.

  • Loops played in the Loop Browser now play at their original tempos when there are no regions in the tracks area and the sequencer is stopped.

  • The Musical Typing Keyboard now works when Flex Pitch is enabled in the Audio Track Editor.

  • Pressing the Option key while using momentum scrolling no longer causes the view to zoom.

  • Help tags now display assigned key commands when hovering over control buttons.

  • Control-clicking a Solo button in the Track Header now activates Solo Safe as expected.

  • The cursor for a tool set in one window no longer persists occasionally when the focus is changed to a different window.

  • When the Drag mode is set to X-Fade, dragging regions from the Project Audio or All Files browsers now sets the X-fade as expected.

  • SMPTE-locked markers now maintain their positions reliably when the frame rate has been changed.

  • Merging looped MIDI regions no longer leads to extra MIDI notes in cases where the looped region does not end at least one clock tick before the start of the next bar.

  • Mixer height in the Main Window is now reliably saved in Screensets.

  • Tools whose key commands include the Command key modifier now switch correctly to the previous tool when the key command combination is released.

  • The contextual menu item Remove Fades now removes fades of the same type correctly from all selected regions.

  • The Toggle Zoom to fit selection or All Contents key command now works as expected with selected Track Stack containers.

  • Auto-zoomed tracks no longer grow in size after automation view has been enabled and then disabled.

  • The Solo tool now works correctly with Force Touch trackpads.

  • The effect of changes made to the region gain while in play will now be heard without having to start and stop playback

  • Looped regions can now be dragged by long-clicking on either the region or one of the loops.

Learn more

Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Contact the vendor for additional information.

Published Date: