MacBook Pro (13-inch, M1, 2020) Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
3 mm hex nut driver  | 923-02995 Adjustable torque driver (10–34 Ncm)  | 923-01322 Antenna tool  |
923-01318 Battery cover  | 076-00290 Bottom case removal kit1  | Compressed air  |
Cut-resistant gloves  | EarPods with 3.5 mm headphone plug  | ESD mat  |
ESD-safe cleaning solution  | ESD-safe tweezers  | ESD wrist strap with clip or plug  |
Ethanol wipes2  | Fireproof enclosure  | 923-02998 Gap offset kit  |
Heat-resistant gloves  | IPA wipes  | 922-1731 Kapton tape  |
923-01803 Keycap lever  | Magnetizer  | Microterry polishing cloth  |
Needle-nose pliers  | 922-5065 Nylon probe (black stick)  | 923-0731 Pentalobe screwdriver  |
Permanent marker  | 923-01800 Precut adhesive strips (1x0.5)  | 923-01801 Precut adhesive strips (1x1)  |
Safety glasses with side shields  | Sand3  | Sand container4  |
Sticky notes (3 by 3 inches)  | 922-8252 Suction cups  | 923-0448 Torque driver (blue, 0.65 kgf cm)  |
923-0247 Torx security bit  | Torx T3 screwdriver  | 923-02996 Torx T5 bit  |
Torx T5 screwdriver  | Torx T8 screwdriver  | 923-03032 Touch ID alignment kit  |
661-06670 USB-C charge cable  |
1 The bottom case removal kit includes the bottom case fixture, C-clamps, and cut-resistant gloves.
2 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
3 Clean, dry, untreated sand (8–10 cups)
4 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)