iPad Air 13-inch (M3) Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
1.5 mm slotted screwdriver  | 923-10417 13-inch display protective cover  | 661-40456 13-inch heated display pocket  |
923-10421 13-inch repair tray1  | 923-02298 Access card  | 923-10420 Adhesive activation roller  |
923-10424 Adhesive cutter  | Cut-resistant gloves  | ESD mat  |
ESD-safe cleaning solution  | ESD-safe tweezers  | ESD wrist strap with clip or plug  |
Ethanol wipes2  | Fireproof enclosure  | 661-44430 Heated display removal fixture3  |
Heat-resistant gloves  | 923-10430 iPad Air 13-inch display adhesive alignment tray  | Isopropyl alcohol (IPA) wipes  |
923-01290 Micro stix bit  | Nitrile or lint-free gloves  | 922-5065 Nylon probe (black stick)  |
Painters tape  | Safety glasses with side shields  | Sand4  |
Sand container5  | 077-00888 Suction cups (medium)  | 923-10414 Support plate  |
923-0248 Torque driver (black, 0.35 kgf cm) kit6  | 923-00105 Torque driver (green, 0.45 kgf cm)  | 923-08468 Torx Plus 3IP 44 mm half-moon bit  |
1 Each repair tray comes with two suction cups.
2 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
3 Refer to the Heated Display Removal Fixture operating manual for general use and precautions. If you purchased a new heated display removal fixture, refer to the unboxing instructions.
4 Clean, dry, untreated sand (8–10 cups)
5 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)
6 The black torque driver kit includes a black torque driver (0.35 kgf cm), Torx security bit (923-0247), and JCIS bit for crosshead screws (923-0246). The bits are also available separately.