MacBook Pro (PROLED XDR, M5 Pro or M5 Max) Tools
Tool images, descriptions, and part numbers.
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
923-07179 4 mm hex nut driver Note: For 16-inch model only  | 923-13515 Adhesive activation roller1  | 923-02995 Adjustable torque driver (10–34 Ncm)  |
923-0735 Adjustable torque driver (0.3–1.2 Nm)  | 923-01322 Antenna tool  | 970-02492 Battery press plate alignment pin Note: For 14- and 16-inch models  |
077-01092 Battery cover Note: For 14-inch model only  | 077-01093 Battery cover Note: For 16-inch model only  | 970-02490 Battery press plate Note: For 14-inch model only  |
970-02491 Battery press plate Note: For 16-inch model only  | 923-03045 Cleaning putty  | Compressed air  |
Cut-resistant gloves  | EarPods with 3.5 mm headphone plug  | ESD mat  |
ESD-safe cleaning solution  | ESD-safe tweezers (round-tipped)  | ESD wrist strap with clip or plug  |
Ethanol wipes2  | Fireproof enclosure  | 923-02998 Gap offset kit  |
Heat-resistant gloves  | IPA wipes  | 922-1731 Kapton tape  |
970-02568 Kevlar thread guide tool  | 970-02508 Kevlar thread (36 inches) Note: Included with replacement speakers  | 970-02507 Kevlar thread handle  |
077-01087 Keyboard backlight alignment pin Note: For 14- and 16-inch models | 923-01803 Keycap lever  | Magnetizer  |
Nitrile gloves  | 922-5065 Nylon probe (black stick)  | 922-8263 Microterry polishing cloth  |
Needle-nose pliers  | 923-0247 Pentalobe PL1.1 44 mm half-moon bit  | 923-0731 Pentalobe screwdriver  |
Permanent marker  | Phillips #00 screwdriver  | 923-01800 Precut adhesive strips (1x0.5)  |
923-01801 Precut adhesive strips (1x1)  | Safety glasses with side shields  | Sand3  |
Sand container4  | 970-02506 Single-use battery cover Note: For 14-inch model only  | 970-02517 Single-use battery cover Note: For 16-inch model only  |
970-02502 Speaker installer cap (right) Note: For 14-inch model only  | 970-02503 Speaker installer cap (left) Note: For 14-inch model only  | 970-02504 Speaker installer cap (right) Note: For 16-inch model only  |
970-02505 Speaker installer cap (left) Note: For 16-inch model only  | Sticky notes (3 by 3 inches)  | 922-8252 Suction cup  |
923-0448 Torque driver (blue, 0.65 kgf cm)  | 923-08468 Torx Plus 3IP 44 mm half-moon bit  | 923-08470 Torx Plus 2IP 25 mm bit  |
923-07620 Torx Plus 1IP 44 mm half-moon bit  | 923-07593 Torx Plus 3IP 25 mm bit Note: For 16-inch model only  | 923-14662 Torx Plus 5IP 44 mm half-moon bit  |
923-08673 Torx Plus 5IP 50 mm bit  | 923-07595 Torx Plus 8IP 25 mm bit  | 923-00304 Torx T6 25 mm security bit  |
923-03032 Touch ID alignment kit  | 661-06670 USB-C charge cable  | 661-23656 USB-C to MagSafe 3 cable  |
1 Refer to the Adhesive Activation Roller Operating Manual for general use.
2 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
3 Clean, dry, untreated sand (8–10 cups).
4 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid).