This article has been archived and is no longer updated by Apple.

Logic Pro X 10.1 Release Notes

Learn about Logic Pro X 10.1 updates.

Also see the Logic Pro X 10.0 Release Notes and Logic Pro X 10.2 Release Notes.

Logic Pro X 10.1.1 update

Stability and performance

  • Logic no longer sometimes stops responding when you open it with Euphonix control surfaces installed

  • Resolves an issue that could cause the Download Manager to appear empty

  • Logic no longer sometimes quits unexpectedly when you use Izotope RX4 as external audio editor

Main window

  • Disabling Automation view in the Main window no longer causes region-based automation that has been switched off to playback unexpectedly

  • Click-holding a region now immediately brings up the Region Info window

  • It is again possible to split a take region with the Scissors tool

  • Editing automation during playback now works properly in projects that start before 1 1 1 1

  • Writing automation for send mutes now works as expected

  • The cursor keys on control surfaces no longer sometimes trigger unexpected key commands

  • Region based automation for all Smart Control parameters now displays reliably

  • Logic now displays the tempo correctly when the Display Tempo As preference is set to "Frames Per Click with Decimals," or "Frames Per Click with Eighths," and the frame rate is 50, 59.94, or 60 fps

  • Audio tracks edited with Melodyne in songs that originated in Logic Pro 9 now play back in sync

  • Logic Screensets that include only plug-in windows work as expected again

  • MIDI regions recorded in Cycle mode no longer sometimes have a measure before the start position of the recording when the first note is performed within the Cycle Pre-processing time before the downbeat

  • The "Beats from Region" function works as expected again

  • Logic no longer outputs an audio pop when switching between certain patches

Editors

  • Deleting fader events for region based automation in the Event List editor now properly removes the interpolation events between them

  • Clicking the plus button in the Sysex Fader editor again adds events as expected

  • All audio take regions now reliably display in the Track Editor

  • The Brush Tool no longer gets stuck in fixed pitch mode when selected after using the Pencil Tool

  • While using the Brush tool, pressing Shift while pressing the mouse button no longer erases the recently brushed notes

  • There is now an option "Snap MIDI Draw and Automation” in the Piano Roll Snap menu

  • Auto Set Locators no longer improperly follows note selections inside of regions

  • The Toggle Loop trigger setting in Touch Tracks again works as expected

  • The Piano Roll now reliably opens with the visible area showing the notes contained in the selected region

  • Undo now reliably works after moving events in the Piano Roll

  • Looping regions with Show Drum Names enabled in the Piano Roll no longer causes notes to transpose unexpectedly

  • Muted notes in the Piano Roll no longer play when clicked

  • Scale Quantize no longer sometimes moves notes that are already in the selected key

  • Touching the Ruler in the Piano Roll with a rubber band selection no longer causes visible Time Frame handles to move to the wrong position

  • MIDI events clicked in the Piano Roll now output on their set MIDI channel as expected

  • The “Delete and Select Next Event” key command now works properly in the Piano Roll

  • Using the right/left arrow keys now reliably triggers notes in the Piano Roll when a different track is selected in the Main window

  • On/Off buttons in the Environment again operate correctly with a short mouse click

  • Environment cabling is now reliably maintained when importing Environment layers not a project

  • The Note Head menu in the Environment Mapped Instrument editor is no longer empty

  • MIDI Draw automation points now follow the mouse as expected when editing in an independent Piano Roll window

Mixer

  • Pre-fader sends are no longer affected by VCA fader changes

  • Replacing Drum Kit Designer with Drum Machine Designer on a Drummer track channel strip no longer converts the track to a Software Instrument track

  • Audio Device controls no longer sometimes display non-functional buttons for the attached audio interface

  • Undoing the deletion of a channel strip in the Mixer no longer leaves the channel strip in a non-functional state

Plug-ins

  • Changing the Knee value in the Platinum Compressor no longer causes unexpected changes in sound and metering when switching to the Classic VCA Compressor model

  • Multimeter plug-in instances saved in previous versions of Logic now load with the correct settings

  • Logic Remote and Controls view in Logic Pro no longer show the RMS/Peak controls for the Compressor models that do not support RMS/Peak

  • Songs using Lexicon PCM Native bundle plug-ins no longer exhibit audio artifacts when played back

Accessibility

VoiceOver can once again access audio channels as well as the track header volume and pan controls

Control Surfaces

  • Channel names now update correctly on control surfaces when opening or clos track stacks in Logic

  • Logic Remote again reliably connects to Logic Pro X at launch when you set the Startup Action to “Ask" in Logic Pro

  • EuCon Artist control surfaces can again control a channel’s send level in Logic

Logic Pro X 10.1 update

New Features

  • 10 new Drummers that produce beats in a variety of electronic and hip hop styles including Techno, House, Trap, Dubstep and more

  • Drummer provides specialized sound and performance controls for dialing in electronic or hip hop drum grooves

  • New Drum Machine Designer plug-in for customizing electronic drum kits

  • Redesigned Compressor plug-in features scalable, Retina-ready interface and 7 models including the new Classic VCA

  • Retro Synth can now create wavetables from imported audio and is able to stack up to 8 voices

  • Note Repeat and Spot Erase modes allow classic drum machine style techniques for creating beats in realtime

  • Automation can now be part of a region, not just the track

  • Relative and Trim Automation modes extend the options for fine-tuning existing automation

  • Manage large-scale mixes more easily with the addition of console-style VCA faders in the mixer

  • Mixer now allows remote control of microphone and other input settings for compatible audio interfaces

  • Realtime rendering of fades allow them to work with Flex Pitch and speeds up project load times

  • The Plug-in Manager now allows you to customize the organization of your menu

  • Support for Mail Drop and AirDrop in OS X Yosemite makes it even easier to share your Logic projects

  • Expanded sound library includes over 200 new synth patches and 10 Mellotron instruments

  • The Piano Roll editor now features a Brush tool for creating or deleting a sequence of notes with single mouse gestures

  • Smart Quantize proportionally corrects the timing and length of notes to preserve the musicality of your original performance

  • Track Stacks can now be disclosed/undisclosed directly in the Mixer independently of the Tracks area

  • New Collapse view option in the Piano Roll Editor lets you see more notes in less vertical space

  • It's now possible to create more than one Drummer track per song

  • It's now possible to copy and paste voices between different instances of Ultrabeat

  • There's a new option in the Drummer Editor action menu that allows you to change the drummer without also changing the drum kit

  • Alternatives can now be exported as fully independent projects

  • There's now a button in the Main window to automatically set the vertical zoom to the optimal resolution to maximize track height while keeping all tracks visible

  • A new Region parameter allows the playback speed of Apple Loops to be altered from ⅛ to 8x the original speed

  • Command-clicking an enabled mute or solo button un-mutes or un-solos all channels if no track is muted or soloed, and command-clicking a mute or solo button mutes or solos all tracks

  • There's now a Kill/Recall Solo button in the track header area that toggles the solo state of all currently soloed tracks

  • The Reset Channel Strip command now works for multiple selected channel strips in the Mixer

  • Logic now supports the Bravura score font

  • There's a new key command for enabling/disabling the Flex or Follow Tempo Region parameter

  • Logic can now import multichannel interleaved audio files and convert them to individual mono files

  • When bouncing a project, the default name for the bounced file is now the project name

  • The Piano Roll now includes an option to display drum names instead of note names when working with Drummer tracks, EXS drum kits or Ultrabeat tracks

  • Time Handles in the Piano Roll allow time stretching/compression on selected notes

  • It's now possible to adjust the position and borders of regions in the Piano Roll time line

  • Undo is now available in the Notepad

  • Undo is now available for Score Set edits

  • A single click now inserts an EQ into the EQ slot of a channel strip

  • Logic now supports 50, 5994d, 5994, 60 d and 60 fps frame rates

  • There's now a Track Protect button for the Movie track

  • The Repeat Regions/Events key command now duplicates the currently selected region or event without opening a dialog window (the previous behavior for this command is accessed with the new key command Repeat Regions/Events Multiple Times)

  • Smart Controls mapped to plug-in parameters are now dimmed when the plug-in is bypassed

  • User created Groove Templates are now available from the Time Quantize menu in the Piano Roll

  • When dragging objects, the Tooltip now shows both the bar/beat and time position

  • The Beat Mapping track now offers a Protect Flex Markers option in the Beat Mapping drop-down menu

  • The Copy command now copies selected markers in the Marker List window as text

  • When multiple closed Track Stack regions are glued together, Logic now maintains the individual tracks within the stack

  • The Convert to New Sampler Track sheet includes a new option for creating ‘1 Shot’ Zones

  • Auto backups of Logic projects are now directly accessible from the Quick Looks view

  • It's now possible to specify up to 100 automatic backups per alternative in a project

  • Dragging a movie in the Movie Track now moves in increments of one frame and the Option key can be used to position it in smaller increments

  • When Logic extracts audio from a movie file, it now creates a time-stamped Broadcast Wave file

  • When a movie is added that is longer than the current project, the project is now automatically lengthened to accommodate it

  • A region with movie audio sync can now be defined for a movie file

  • When exporting audio to a movie, Logic now uses the project sample rate

  • When exporting audio to a movie, the length of the selected regions now determines the overall length of the newly created movie

  • The contents of the Bounces folder is now excluded when Cleanup Project is used on a folder project

  • The Clean Up Project dialog now shows the dates previous operations were performed

Stability

  • Logic Pro X 10.1 includes improvements to stability including, but not limited to fixes for:

  • Quitting unexpectedly when analyzing 192 kHz audio files for flex editing

  • Quitting unexpectedly when the Mix > Create Automation > Fade-Out command is used

  • Quitting unexpectedly when adjusting the start time of a region by samples in the Event List

  • Quitting unexpectedly when editing MIDI events in a song created in Mobile GarageBand

  • Quitting unexpectedly when importing a MIDI file that contains no note events

  • Quitting unexpectedly when adding a Text object to the Environment

  • Quitting unexpectedly after performing multiple velocity edits in the EXS24 Instrument Editor

Performance

  • Transient detection for Beat mapping is performed faster in cases where the audio file has been divided into multiple smaller regions

  • Responsiveness when rubber-band selecting a large number of regions is improved

  • Improves the performance of the realtime waveform while recording audio

  • The movie now responds more accurately when scrubbing by frames with the Playhead

  • Logic no longer shows a spinning wait cursor for several seconds when recording is started on certain computers

  • Logic now uses less CPU when idle on Macs running on battery power

Main Window

  • When an Apple Loop is added to a new track, the channel strip volume is now set to match the pre-listen volume in the Loop Browser

  • There is now an option that allows the looped portion of looped regions to have a darker shade than the parent region

  • The cycle locators in the LCD now reliably show the cycle state in projects originally created by earlier versions of Logic

  • The "Slice at Transient Markers" command now works on regions up to 256 bars in length

  • Tracks set to follow a Drummer track that is enabled as the Groove track now update as expected when changing the Swing parameter in the Drummer editor

  • Dragging the Zoom tool over the lower half of a track no longer sets the visible area to include the track below

  • Global edit operations, such as the “Insert Silence between Locators” command, now are applied to hidden tracks

  • Long regions with fades applied now resume playback as expected when overlapped by a shorter region

  • Logic now automatically applies crossfades when cycling to reduce clicks in audio regions at cycle start and end points

  • The Patch Library can now be used to browse and assign patches to the right-hand channel strip in the Tracks area Inspector when it's selected

  • Replace mode recording onto a Take Lane of a group track that is clutched no longer removes that track from the group (this allows group comping to work as expected once the group is reactivated)

  • Dragging the right edge of a region to the right in songs that start before 1111 no longer results in unexpected jumps in the region border

  • The Zoom to Fit Selection command now includes the looped portions of looped regions

  • Logic no longer fails to record when the SMPTE start time is 00:00:00:0000 and there is a Record pre-roll

  • Creating a MIDI track with a device configured in Audio MIDI Setup now behaves as expected

  • Option-clicking on Inspector parameters such as Transpose or Velocity again resets them to default values

  • Changes made to fade values in the Region Inspector by scrolling are now updated immediately during scrolling

  • Performing Undo after creating a Track Stack no longer removes plug-in settings from the tracks used in the Track Stack

  • When a Take Folder is disclosed, other non-disclosed Take Folders no longer show empty outlines in the Take Lanes

  • Logic again presents a dialog asking if a time signature change should be added after using the Cut Section between Locators command for a section whose borders do not both fall on the start of a bar

  • Bounce Track in Place now includes all regions on a MIDI track that contains MIDI takes

  • Using the Split by Playhead command no longer causes a looped region earlier in the same track to unexpectedly extend to the beginning of the split region

  • Deleting a Track Stack summing Aux no longer deletes tracks that had originally been part of the stack, but were subsequently moved out of it

  • Adjusting the anchor position on an audio region no longer causes the length to change slightly

  • Enabling automation view no longer causes an auto-zoomed track’s vertical zoom to increase

  • Clicking Learn to learn controller assignments in the Toolbar no longer causes all buttons in the Toolbar to dim

  • The overview on a closed Track Stack is now shown correctly in projects whose start time isn't 1 1 1 1

  • Reorganizing the order of tracks within a Summing Track Stack no longer causes some the tracks to route to the wrong bus or output

  • When recording MIDI, Logic now captures notes played up to 1 bar before the first downbeat

  • Logic no longer shows a File Not Found error when renaming an audio file that's stored outside the project folder in the Project Audio window

  • When the locators are set to start at 1 1 1 1, the Insert Silence at Locators command no longer adds an unneeded 4/4 time signature and changes the LCD display to -9 1 1 1

  • The "Split by Playhead" command no longer moves SMPTE locked regions when performed at high zoom levels

  • Maximizing a floating Transport no longer causes it to stretch to the full width of the screen

  • Creating a new Software Instrument track no longer causes Logic’s global tuning to reset to A440 if it's been changed

  • Catch Playhead Position is again properly disabled when a Marquee selection is made

  • Command-clicking the lower half of the timeline again toggles Auto Punch

  • It's again possible to delete the right portion of a region divided by using Marquee selection

  • Logic’s real time waveforms are now accurately positioned when audio recording is started after playback has begun

  • Logic now reliably uses the selected instrument when using the Drum Replacement feature

  • Audio added to the Project Audio window is now reliably shown in its correct position, as determined by the sort method selected in the window

  • Record enabling a track no longer opens the Bounce window if an Output track is selected

  • Regions created by performing Strip Silence now retain any Region Gain setting applied to the original region

  • The "Project Cleanup" command now preserves assets used by other projects in the same project folder

  • Smart Snap now works correctly with /8 based signatures and at high zoom levels

  • Settings for the Metronome are now saved as expected in Templates

  • Join Regions per Tracks again works properly when some of the regions in the selection do not require merging

  • Selection of regions via Shift-click and Command-click now works reliably in projects that contain track stacks

  • Custom graphs and ranges set up for Smart Controls are now retained when the Smart Control is copied

  • When an Alternative is created after a project has been edited, Logic now shows a dialog offering to save the current Alternative

  • When Catch mode is enabled in the Marker List, double-clicking a marker now properly opens that marker instead of the one currently under the Playhead

  • Changing a project’s frame rate no longer causes SMPTE-locked regions to change positions

  • When a project is saved with a movie open in full screen mode on a second display, the movie now displays in full screen mode when the project is opened

  • Prelisten of audio files in the All Files browser now continues when using the arrow keys to navigate between files

  • Clicking on the Piano Roll tab in the Main window now properly sets the focus to the Piano Roll editor

  • A single audio track packed into a folder and then moved to to a different audio track, now plays on the new audio track as expected

  • Logic Control control surfaces are more reliably detected at launch

  • Logic now reliably retains audio recordings that are part of a project but not currently used in a take when the project is saved for the first time

  • The "Join with Select Regions" recording option now works as expected when dropping into recording while playing

Editors

  • The Option key can now be used with the Scissors tool to divide a long note into a set of equal length shorter notes

  • The Event list now immediately updates to show notes copied into the Score or Piano Roll editors

  • Edits to notes performed in the Event List are now immediately reflected in the Piano Roll

  • Deleting an event definition in the Step Editor now selects the next event definition

  • It's now possible to select a group of events in the Step Editor by Shift-dragging over them with the pointer

  • The Finger tool can now be used to move events in the Step Editor

  • When a region is moved in the Tracks area, its position in the Step Editor bar ruler is now immediately updated

  • The MIDI In and MIDI Out buttons in the Event List and Piano Roll now synchronize between the two editors as expected

  • The timeline in the Step Editor now updates immediately when the Division format is changed in the LCD

  • Right-clicking in the MIDI Draw area of the Piano Roll no longer causes selected regions to be de-selected

  • MIDI Draw in the Piano Roll now reliably shows labels for all MIDI controller types

  • The Paste command is again available in the Piano Roll contextual menu

  • When multiple regions are selected, double-clicking a note in the Piano Roll again restricts the view to only the region containing the note, and a double-click on the Piano Roll background restores the previous view

  • When Step Input is active for an editor, key presses on the computer keyboard no longer lead to unexpected note entry when the Musical Typing Keyboard isn't open

  • Pressing Control-Shift while dragging notes in the Piano Roll now allows movement in increments of single ticks

  • Simultaneously editing values on multiple selected Staff Styles now reliably maintains the relative values

  • Edits are now performed at the correct Playhead position when the "Split by Playhead" command is used in the Piano Roll on a region whose left border has been changed

  • The position of cuts for regions divided with the Scissors tool at high zoom levels is now consistently accurate

  • Undo now works as expected after editing time and key signatures

  • A Piano Roll with Link mode turned off no longer loses focus when a region at a different position is selected

  • Sharp notes now properly retain their pitch when pressing Enter to confirm an edit in the Event List

  • Notes on the Piano Roll now continue to display if the Global Track header or an item in a Global Track is selected

  • Pasting events whose type is filtered in the Event List now works correctly

  • Double-clicking a note in the Event List editor no longer causes the pitch to change

Automation

  • Changing the automation mode for a group of Aux channels selected in the Track Mixer now works reliably when some of them are assigned to tracks in the Tracks Area

  • Changes made simultaneously to the automation display of multiple tracks are now immediately visible in the Tracks area

  • A tooltip showing position information is again shown when moving an automation or a MIDI Draw point in the Tracks area

  • In Write mode, automation is no longer written for MIDI plug-ins when plug-in automation is disabled in automation preferences

  • A long click on a horizontal MIDI Draw automation line no longer unexpectedly changes it to a vertical line

  • When a region is copied at the same position from one track to another using the same channel strip, Logic no longer asks whether automation should be copied

  • When adjusting velocity in MIDI Draw, the velocity now displays as expected in the Tooltip

  • Engaging the mute switch on one automation lane no longer mutes automation on other lanes

  • Undo now works correctly when used after opening Automation lanes

  • It's now possible to use the up and down arrow keys to navigate the track list when Automation lanes are disclosed on some tracks

  • Setting an automation mode for an Aux in the main window Channel Strip Inspector now creates a track for the Aux in the Tracks area

  • A single click in MIDI Draw no longer creates multiple automation points

  • It's no longer possible to place two automation points for the same parameter in a track on the same clock tick

  • When automation is enabled for the first time in a project, the power buttons for track automation now default to On for each track

Flex

  • Flex pitch now works in areas of audio regions where fades have been applied

  • When the flex mode is changed on a track, flex is no longer enabled on regions where flex had been disabled

  • When the delete key is used to remove a flex marker in one track of an editing group, the corresponding flex markers in other tracks in the group are now reliably deleted as well

  • Edits applied to split stereo audio files no longer remove or corrupt existing flex edits on those files

  • Resetting manual flex pitch edits no longer causes all flex pitch values to disappear in the Tracks window

  • Double-clicking a flex pitched note in the Tracks area now resets its pitch as expected

  • When a flex pitch edit is applied to a note in a Take, the pitch values displayed for other notes in the Take are no longer incorrectly displayed as having the same value

  • The Create MIDI Track from Flex Pitch Data command now works reliably on the first try

  • Undo after gluing two flex pitched notes together now works as expected

  • Flex pitched notes now continue to display reliably after the region containing them is divided

  • Key signature changes no longer cause unexpected transposition of flex pitched audio tracks

Fades

  • Edits applied to fades are now audible during playback

  • Flex edits applied to regions with fades are now audible during playback

  • When switching Project Alternatives, Logic no longer plays fades incorrectly

  • It's now possible to change the Fade type in the Region Inspector when multiple regions with fades of different lengths are selected

Drummer

  • The Follow option in the Drummer editor now works as expected when the track followed contains take regions

  • Extending a looped Drummer region to the right over another region no longer removes the beginning of the second region – instead, the loop ends at the start of the new region

  • Transform is now available on Drummer regions converted to MIDI on the Drummer track

  • New Drummer channel strips set to Surround no longer default to “No Output”

  • It's again possible to open a Drummer track that has been converted to audio with the "Bounce > And Replace all Tracks" command in the Audio Editor

Global Tracks

  • Highlighted text fields in Global Tracks pop-up windows now maintain proper alignment when the window is resized

  • Beat Mapping using “Tolerate missing or additional events” now works with time signatures of 3/4, 5/4, and 6/4 as well as 4/4

  • Deleting beat markers on the Beat Mapping track now reliably deletes the corresponding tempo events

  • The Eraser tool now works reliably when deleting beat markers in the Beat Mapping track

  • The beat mapping track now always shows a handle at the beginning and end of a region, whether or not there is a detected transient at those positions

  • Markers are now displayed in the timeline when the Global Marker track is not visible

  • When the starting time code for a project has been changed from the default, copying an Arrangement Marker no longer resets the project’s starting timecode to 00:00:00:0000

  • If the Marker track is hidden, renaming an Arrangement marker no longer causes it to be shown

  • The Marker Track now maintains its set height when a screen set is recalled

  • Tooltips are again displayed when moving or copying Markers and Arrangement Markers

  • It's now possible to show/hide individual global tracks after adding a movie to a project

  • Switching from one Tempo Set to another while pressing Option now copies the first Tempo Set

Import

  • When importing tracks from another project, the import sheet now shows individual tracks within Track Stacks by default

  • Importing an XML file with a different frame rate into Logic Pro no longer causes an unexpected SMPTE offset

  • Lyrics with non-standard ASCII characters in MIDI files now import correctly

  • When importing long MP3 files, Logic no longer creates AIFF files that are larger than necessary

  • It is again possible to drag and drop a movie from the Finder to the Movie track

Export/Sharing

  • Logic now remembers the last settings used to export audio to a movie

  • Improves reliability when exporting Music XML for songs with a large number of tracks

  • Regions that start after 1 1 1 1 are now handled properly when exported to Music XML

  • Logic now retains chapter markers from imported movies after audio has been exported to the movie

  • It's again possible to share to iTunes directly from the Bounce window

  • Logic now creates properly configured key signatures in exported MIDI files

  • Settings made in the Bounce window are now retained the next time Bounce is used

Score

  • Duration bars are now available for independent notes in the Score window

  • Step Input now creates whole notes of the correct length

  • Tied notes shorter than a dotted 32nd tied to a tuplet can again be displayed

  • The staff shown in the Staff Styles window now reflects the key signature that results from changes to the Transpose setting

  • Independent notes are now displayed correctly on drum tracks

  • In the Score it is no longer possible to create a beat grouping whose sum exceeds the total number of beats in the time signature

  • The cursor for the alternate (Command key) tool in the Score now reliably shows the tool when the Command key is pressed

  • If Interpretation is enabled and a note of shorter duration than the current display quantize setting is dragged to the staff, interpretation is automatically defeated for the dragged note, so that it displays as intended

  • The Undo Quantization key command and menu item again works in the Score

  • Adding a new Drum Group assignment again works as expected in the Score window

  • The Staff Style editor now immediately updates to show newly added staves

  • Undo now works as expected after editing brackets and lines in the Staff Style window

  • The Fix Displayed Note Positions & Durations command no longer causes notes to shift position

  • It is now possible to use Command or Shift to select multiple markings in the Chord Grid Editor

  • Clicking in the background of the Score with the Zoom tool after zooming now reliably returns to the previous zoom setting

  • The Camera tool in the Score now properly captures lines and ties

  • The Sonata score font now works as expected with Logic Pro X on OS X Yosemite

  • The edit handles for slurs and crescendos are now easier to click

  • Double-clicking a chord extension now opens the Chord Symbol dialog

Key Commands

  • When editing key commands, Logic now correctly warns for all conflicts with an entered key command

  • The Hide Selected Track key command now affects all selected tracks

  • The various windows key command “Mute Notes/Regions/Folders” now works in the Step Editor

  • The key commands to move and adjust Marquee selections now behave correctly when used on Take regions

  • The key command to toggle the Loop Browser now works correctly when the bottom portion of the Loop Browser has focus

  • Unused audio files are now properly highlighted when the Select Unused key command is used

  • The key commands for Set Quantize Parameter to Next/Previous Value now work as expected in the Piano Roll editor

  • The key commands for FWD by Transient and RWD by Transient are now assigned by default to Control + and Control - respectively

  • There's now a key command to toggle the Musical Grid between bars and beats, and SMPTE time

Plug-Ins

  • Notes in high octaves now loop reliably in all EXS instruments

  • When in MIDI Mono Mode, EXS24 now responds to channel pressure independently per MIDI channel

  • The Recall Default plug-in setting now works with the Delay Designer plug-in

  • It's now possible to dynamically hide or show parameters in the Scripter plug-in

  • The Arpeggiator plug-in’s Pattern name now instantly updates when changes are made to the selected pattern name, or a pattern is loaded or deleted

  • The Power button in a MIDI plug-in window can now be mapped to a Smart Control

  • Audio Unit MIDI plug-ins now play back at the correct tempo when the project sample rate is set to something other than 441 kHz

  • Scrolling numerical values with the mouse in the Channel EQ again works as expected

  • Ultrabeat and EXS24 now remain in sync when the project tempo is changed during playback

  • When Logic’s playhead is moved while playback is stopped, the playhead in an inserted Melodyne plug-in now updates to show the correct position

  • The Gain plug-in no longer introduces clicks when switching between mono and stereo, or swapping L and R

  • The text showing the db value for the Output Gain slider on Amp Designer displays as expected

  • In the Pitch Shifter plug-in, changing the Stereo Link from Inverse to Normal no longer causes some of the unprocessed signal to sound when the Mix setting is 100%

  • The Ensemble plug-in now outputs audio to the left channel in single voice mode

  • Removing a multi-output Software Instrument track now also removes its associated Aux channels from the Mixer

  • The text for the Show/Hide all Plug-in Windows menu now correctly matches the current state of the plug-in windows

  • Custom I/O labels now show up correctly with the External Instrument and I/O plug-ins

Synchronization

  • Logic now properly distinguishes between and supports 24 fps and 23976 fps time code

Accessibility

  • Voiceover now works when the Tab key is used to jump to the Smart Controls Editor

  • Plug-in slots on channel strips are now accessible with VoiceOver

  • Edits to region names, looping and region borders are again possible using VoiceOver

Published Date: