MP3 settings in Compressor
The built-in MP3 File and MP3 for Audio Podcasting settings in Compressor use the MP3 transcoding format. This format encodes MP3 files, which are often used for digital audio players. You can also create custom settings that use the MP3 transcoding format.
Note: You can also create custom settings that use the MP3 transcoding format. However, the built-in MP3 settings (in the Settings pane) analyze your source media and assign optimal properties to ensure the best possible transcoding results.
The properties of built-in and custom settings that use this transcoding format are located in the General inspector and Audio inspector (described below).
Displays the setting name and transcoding format used by Compressor, as well as an estimated output file size. When you add a setting to a job or change the setting’s properties, this summary is automatically updated.
Name: Displays the name of the setting.
Description: Displays the description of the setting.
Extension: Displays the extension of the output file (.mp3).
Allow job segmenting: This checkbox is dimmed because job segmenting is not available for settings that output only an audio file.
Default location: Select an item from the pop-up menu to set the default save location for transcoded files.
Sets the processing algorithm used to adjust the frame rate during transcoding. Select one of the following options:
Set to percent of source using: Modifies the output clip’s speed by a percentage of the source clip’s speed. Enter a value in the percentage field or choose a preset value from the adjacent pop-up menu (with a down arrow).
Set to: Sets the duration of the clip. Enter a timecode duration in the field or click the arrows to increase or decrease the time.
So source frames play at [frame rate] fps: Nondestructively changes the playback speed of the clip without discarding frames or creating new frames. This property has no effect unless the “Frame rate” value in the Video inspector is different from the source file’s frame rate. For example, if you add a 10-second source file with a frame rate of 24 fps to Compressor, set the “Frame rate” property in the Video inspector to 25 fps, and then select “So source frames play at 25 fps” in the General inspector, the resulting duration of the transcoded clip (at 25 fps) will be 9 seconds and 15 frames.
For more information, see Retime video and audio using Compressor.
Sample rate: Use this pop-up menu to set the number of times per second that music waveforms (samples) are captured digitally. The higher the sample rate, the higher the audio quality and the larger the file size.
Data rate: Use the slider to set the number of kilobits per second (kbps) required to deliver your audio file. Using a higher rate will produce a higher-quality audio file.
Use variable bit rate encoding: Select the checkbox to vary the number of bits used to store the music depending on the complexity of the music. Variable bit rate encoding can reduce the size of the output file.
Joint stereo: Select the checkbox to have one channel carry the information that’s identical on both channels, and another channel carry unique information. At bit rates of 160 kbps and below, this setting can improve the sound quality of your converted audio.
Smart encoding adjustments: Select the checkbox to have Compressor analyze the source file and the setting’s encoding properties to maximize the quality of the output file.
Filter frequencies below 10 Hz: Select the checkbox to have Compressor remove inaudible frequencies from the source file and output a smaller and more efficient file without perceptible loss of quality.
For a list of available audio effects in Compressor, and instructions on how to add an audio effect to a setting, see Add and remove effects in Compressor.
Download this guide: PDF