iPhone 17 Pro Max Top Speaker

Before You Begin

Warning

Read Battery Safety and follow workspace and battery handling guidelines before you begin.

Remove the following parts before you begin:

Tools

  • Adjustable torque driver (10–34 Ncm)

  • Crosshead 44 mm half-moon bit

  • Crosshead 50 mm bit

  • ESD-safe tweezers

  • Nitrile or lint-free gloves

  • Nylon probe (black stick)

  • Torque driver (orange, 0.85 kgf cm)

Refer to a full list of tools required for all repairs.

Removal

Note: If you’ve already completed the removal steps, skip to reassembly.

  1. Use the adjustable torque driver and crosshead bit to remove three crosshead screws from the top speaker.

  2. Lift the top speaker out of the enclosure.

Reassembly

Screw Diagram

  1. Position the top speaker in the enclosure at an angle as shown. Then lower it into the enclosure.

    • Caution: Ensure that the speaker gasket is fully aligned with the indentation in the enclosure.

  2. Set the torque value on the 10–34 Ncm adjustable torque driver to 13 Ncm. Use the adjustable torque driver and crosshead bit to install two new crosshead screws (923-13956) into the top speaker.

  3. Use the orange torque driver and crosshead bit to install one new crosshead screw (923-13949) into the top speaker.

Reinstall the following parts to complete reassembly:

Published Date: