iPhone 13 Pro Max Bottom Speaker

Before You Begin

Warning

Read Battery Safety and follow workspace and battery handling guidelines before you begin.

Remove the following part before you begin:

Tools

  • 6.7-inch repair tray

  • ESD-safe tweezers

  • JCIS bit

  • Nylon probe (black stick)

  • Torque driver (blue, 0.65 kgf cm)

  • Torque driver (gray, 0.55 kgf cm)

Caution

Avoid touching the grounding springs on the bottom speaker.

Removal

  1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.

  2. Use a torque driver and the JCIS bit to remove the four crosshead screws from the bottom speaker. Set aside the screws.

  3. Use ESD-safe tweezers to grasp the lower left screw hole and peel the bottom speaker away from the battery shim. Then remove the bottom speaker from the enclosure.

Reassembly

  1. Rotate the repair tray. Ensure that the rubber gasket is positioned as shown. If the gasket is out of position, use ESD-safe tweezers to reposition it.

  2. Rotate the repair tray. Then position the bottom speaker in the enclosure.

  3. Use the gray torque driver and JCIS bit to install three new crosshead screws (923-06276) into the bottom speaker as shown. Press the bottom speaker down while you install the screws.

    • Caution: Don’t damage the grounding springs on the bottom speaker.

  4. Use the blue torque driver and JCIS bit to install one new crosshead screw (923-05106) into the bottom speaker.

Reinstall the following part to complete reassembly:

Published Date: