iPhone 14 Pro Max Top Speaker

Before You Begin

 Warning

Read Battery Safety and follow workspace and battery handling guidelines before you begin.

Remove the following part before you begin:

Tools

  • 6.7-inch repair tray

  • ESD-safe tweezers

  • JCIS bit

  • Nitrile or lint-free gloves

  • Nylon probe (black stick)

  • Torque driver (gray, 0.55 kgf cm)

 Caution

  • To avoid damaging the lenses, don’t touch the TrueDepth camera assembly or nearby parts.

  • Avoid the grounding spring on the camera cowling.

Removal

  1. Place the enclosure in the repair tray with the Lightning connector facing the cutout.

  2. Put on the gloves to prevent contamination of the camera lenses.

  3. Use a torque driver and the JCIS bit to remove the two crosshead screws from the top speaker. Set aside the screws.

  4. Use the flat end of the black stick to tilt up the top speaker (1). Then remove the top speaker from the enclosure (2).

Reassembly

  1. Position the top speaker in the enclosure.

  2. Use the gray torque driver and JCIS bit to install two new crosshead screws (923-08159) into the top speaker.

Reinstall the following part to complete reassembly:

Published Date: