iPhone Air Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
923-13307 6.5-inch back protective cover  | 923-13306 6.5-inch display protective cover  | 923-12847 6.5-inch repair tray with platypus icon  |
923-10726 9-volt battery clips  | 923-01092 Adhesive cutter  | 923-10723 Adhesive de-bond charge plate  |
661-42688 Adhesive de-bond fixture  | 923-10722 Adhesive de-bond fixture cable  | 923-09176 Adhesive removal tool  |
661-52832 Adjustable heated display pocket  | 923-02995 Adjustable torque driver (10–34 Ncm)  | 923-13934 Back glass sanding cover  |
923-02657 Battery press  | 923-12840 Camera cap  | 923-13308 Camera protective cover  |
923-0246 Crosshead 44 mm half-moon bit  | 923-09177 Crosshead 50 mm bit  | 923-10727 Crosshead 100 mm half-moon bit  |
Cut-resistant gloves  | 661-08916 Display press  | 923-11174 Display removal wedges  |
ESD mat  | ESD-safe cleaning solution  | ESD-safe tweezers  |
ESD wrist strap with clip or plug  | Ethanol wipes1  | 923-13516 Half-moon bit adapter  |
661-44430 Heated display removal fixture2  | Heat-resistant gloves  | 923-12843 Interposer plate  |
IPA wipes  | 922-1731 Kapton tape  | 923-13470 Logic board dock  |
923-13466 Logic board dock insert with platypus icon  | Melamine sponge  | Nitrile or lint-free gloves  |
922-5065 Nylon probe (black stick)  | 923-0247 Pentalobe PL1.1 44 mm half-moon bit  | Safety glasses with side shields  |
Sand3  | Sand container4  | Sanding block  |
923-02066 Super screw 44 mm half-moon bit  | 923-09962 Super screw 50 mm bit  | 923-0248 Torque driver (black, 0.35 kgf cm) kit5  |
923-0448 Torque driver (blue, 0.65 kgf cm)  | 923-00738 Torque driver (gray, 0.55 kgf cm)  | 923-00105 Torque driver (green, 0.45 kgf cm)  |
923-08131 Torque driver (orange, 0.85 kgf cm)  | 923-08085 Torque driver (teal, 0.75 kgf cm)  | 923-01290 Trilobe 44 mm half-moon bit  |
USB-C charge cable  |
1 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
2 Refer to Heated Display Removal Fixture Operating Manual. If you purchased a new heated display removal Fixture, refer to the unboxing instructions.
3 Clean, dry, untreated sand (8–10 cups)
4 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)
5 The black torque driver kit includes a black torque driver (0.35 kgf cm), crosshead 44 mm half-moon bit (923-0246), and pentalobe PL1.1 44 mm half-moon bit (923-0247). The bits are also available separately.