Publicly trusted Transport Layer Security (TLS) server authentication certificates must meet Apple's Certificate Transparency (CT) policy to be evaluated as trusted on Apple platforms.
Certificates that fail to comply with our policy will result in a failed TLS connection, which can break an app’s connection to Internet services or Safari’s ability to seamlessly connect.
Apple's policy requires at least two Signed Certificate Timestamps (SCT) issued from a CT log – once-approved1 or currently approved2 at the time of check – and either:
- At least two SCTs from currently approved CT logs with one SCT presented via TLS extension or OCSP Stapling; or
- At least one embedded SCT from a currently approved log and at least the number of SCTs from once or currently approved logs, based on validity period as detailed in the table below.
For certificates with a notBefore value greater than or equal to 21 April 2021 (2021-04-21T00:00:00Z), the Number of embedded SCTs based on certificate lifetime3:
|Certificate lifetime||No. of SCTs from separate logs||Maximum no. of SCTs per log operator which count towards the SCT requirement|
|180 days or less||2||1|
|181 to 398 days||3||2|
For certificates with a notBefore value less than 21 April 2021 (2021-04-21T00:00:00Z), the Number of embedded SCTs based on certificate lifetime:
|Certificate lifetime||No. of SCTs from separate logs|
|Less than 15 months||2|
|15 to 27 months||3|
|27 to 39 months||4|
|More than 39 months||5|
For certificates with a notBefore value equal to or greater than 20210421T00:00:00Z, log operators MAY reject leaf certificates which don’t contain the serverAuth EKU.
Log operators MUST provide a minimum of 45 days’ advance written notice to certificate-transparency- firstname.lastname@example.org of any changes to the accepted set of leaf certificates their log(s) accepts.
1. To be considered "once-approved", the timestamp in the SCT must have been issued from a CT log with a "Qualified" or "Usable" status at the time of the SCT issuance.
2. For CT log status definitions, please refer to Apple’s Certificate Transparency log program: https://support.apple.com/en-gb/HT209255
3. A certificate's validity period (or lifetime) is defined in line with RFC 5280, Section 126.96.36.199, as "the period of time from notBefore to notAfter, inclusive".
a. Validity period is measured with a day being equal to 86,400 seconds. Any time greater than this indicates an additional day of validity.