Mac Studio (2022) Housing

Before You Begin

Note: You can remove the logic board with antenna 1, fan, battery, and SSD modules installed.

Removal

  1. Stand the housing on its back side as shown.

  2. Use the T7 screwdriver to remove the two T7 standoff screws (923-07110) from the housing.

The housing includes the following parts:

  • Power button (1)

  • Status indicator light (2)

Note: The power button can be replaced separately.

Reassembly

  1. Use the T7 screwdriver to install the two T7 standoff screws (923-07110) into the housing.

  2. Reinstall the following parts to complete reassembly:

Published Date: