MacBook Pro (14-inch, M5) Display Hinge Covers

Before You Begin

Warning

Read Battery Safety and follow workspace and battery handling guidelines before you begin.

Remove the following parts before you begin:

Tools

  • Adjustable torque driver (10–34 Ncm)

  • Torx Plus 5IP 50 mm bit

Refer to a full list of tools required for all repairs.

Removal

Note: If you’ve already completed the removal steps, skip to reassembly.

  1. Use the 10–34 Ncm adjustable torque driver and 5IP bit to remove the two 5IP screws (923-13442) from each display hinge cover.

  2. Remove the two display hinge covers from the top case.

Reassembly

  1. Keep the 5IP bit in the 10–34 Ncm adjustable torque driver. Set the torque value to 10 Ncm.

  2. Position the left display hinge cover in the top case.

  3. Press the display hinge cover toward the edge of the top case and hold it in place. Then use the adjustable torque driver and 5IP bit to reinstall the two 5IP screws (923-13442) into each display hinge cover.

  4. Repeat reassembly steps 2 and 3 for the right display hinge cover.

Reinstall the following parts to complete reassembly:

Published Date: