MacBook Pro (13-inch, M2, 2022) Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
3 mm hex nut driver  | 923-02995 Adjustable torque driver (10–34 Ncm)  | 923-0735 Adjustable torque driver (0.3–1.2 Nm)  |
923-01322 Antenna tool  | 923-01318 Battery cover  | 076-00290 Bottom case removal kit1  |
Compressed air  | Cut-resistant gloves  | EarPods with 3.5 mm headphone plug  |
ESD mat  | ESD-safe cleaning solution  | ESD-safe tweezers  |
ESD wrist strap with clip or plug  | Ethanol wipes2  | Fireproof enclosure  |
923-02998 Gap offset kit  | Heat-resistant gloves  | IPA wipes  |
922-1731 Kapton tape  | 923-01803 Keycap lever  | Magnetizer  |
Microterry polishing cloth  | Needle-nose pliers  | 922-5065 Nylon probe (black stick)  |
923-0731 Pentalobe screwdriver  | Permanent marker  | 923-01800 Precut adhesive strips (1x0.5)  |
923-01801 Precut adhesive strips (1x1)  | Safety glasses with side shields  | Sand3  |
Sand container4  | Sticky notes (3 by 3 inches)  | 922-8252 Suction cups  |
923-0448 Torque driver (blue, 0.65 kgf cm)  | 923-00738 Torque driver (gray, 0.55 kgf cm)  | 923-0247 Torx security bit  |
923-07593 Torx Plus 3IP bit  | 923-07060 Torx T3 half-moon bit  | Torx T3 screwdriver  |
923-02996 Torx T5 bit  | Torx T5 screwdriver  | 923-0734 Torx T8 bit  |
Torx T8 screwdriver | 923-03032 Touch ID alignment kit  | USB-C charge cable  |
1 The bottom case removal kit includes the bottom case fixture, C-clamps, and cut-resistant gloves.
2 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
3 Clean, dry, untreated sand (8–10 cups)
4 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)