Mac Studio (2022) Antenna 3

Before You Begin

Removal

1. Position the computer as shown.

   

2. Use the antenna tool to lift the end of the antenna coaxial cable off the connector.

   

3. Lift the antenna coaxial cable out of the antenna coaxial cable grounding clips in the housing.

   

4. Use the T5 screwdriver to remove the two T5 screws (923-07101) from antenna 3.

   

5. Lift antenna 3 out of the housing.

   

Reassembly

1. Position antenna 3 in the housing.

   

2. Insert the Torx T5 bit into the 10–34 Ncm adjustable torque driver. Set the torque value to 11.5 Ncm.

3. Use the adjustable torque driver and Torx T5 bit to reinstall the two T5 screws (923-07101) into antenna 3.

   

4. Use the black stick to press the antenna coaxial cable into the antenna coaxial cable grounding clips in the housing.

   

5. Use the blunt end of the antenna tool to press the end of the antenna coaxial cable to the connector.

   

Reinstall the following parts to complete reassembly:

• Internal frame

• Power supply

• Bottom cover