Important safety information for Apple Studio Display
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injuries, or damage to your Studio Display or other property. Read all safety information below before using your Studio Display.
Handling. Set up your Studio Display on a hard, stable work surface that allows for adequate air circulation under and around it. Never push objects into the ventilation openings. Your Studio Display can be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquids, oils, and lotions. Don’t use a damaged Studio Display, such as one with a cracked screen, as it may cause injury.
Liquid exposure. Keep your Studio Display away from sources of liquid, such as drinks, oils, lotions, washbasins, bathtubs, shower stalls, and so on. Protect your Studio Display from dampness, humidity, or wet weather, such as rain, snow, and fog.
Temperature. Don’t expose Studio Display to excessive temperatures (ambient operating temperature should be 50° to 95° F or 10° to 35° C), moisture, or humidity. Studio Display is not recommended for outside use.
Ventilation. Don’t block the top or bottom ventilation openings of your Studio Display. Don’t place Studio Display where ventilation is restricted (for example, in a cabinet).
Precautions. A display may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking these precautions:
Follow the manufacturer’s instructions when using a stand or adapter to mount your Studio Display.
Always use furniture that can safely support your Studio Display.
Always ensure your Studio Display is not overhanging the edge of supporting furniture.
Always educate children about the dangers of climbing on furniture to reach your Studio Display.
Always keep hands and fingers away from the moving parts of the stand to avoid being pinched.
Always route cords and cables connected to your Studio Display so that they cannot be tripped over, pulled, or grabbed.
Always route cords and cables connected to your Studio Display in such a way that allows you to safely rotate the display.
Never place your Studio Display in an unstable location.
Never place your Studio Display on tall furniture (for example, a cupboard or bookcase) without anchoring both the furniture and Studio Display to a suitable support.
Never place your Studio Display on cloth or other materials that may be located between Studio Display and supporting furniture.
Never place items on or around your Studio Display that might tempt children to climb on top of the display or the furniture on which it’s placed.
VESA mount adapter. Read all the installation instructions and safety information that came with your VESA-compliant 100x100mm mounting solution before attaching it to the VESA mount adapter. Follow these instructions to ensure the proper setup of your Studio Display and VESA mounting solution:
Make sure the VESA mounting solution and installation method (type of bolt or bracket) are sufficient to handle the weight of the Studio Display (up to 7.5 kg/16.5 lbs).
Verify that the mounting plate thickness and screw length will enable the screw to fully fasten and clamp the mounting plate to the 8mm of available thread on the VESA mount adapter.
Select a mounting location where the Studio Display will be free from accidental impact.
Don’t mount the Studio Display so that it faces downward (for example, on the ceiling) or at more than a 5° downward or 25° upward tilt.
Important: Agency compliance information and the serial number are marked on the back of your Studio Display with built-in VESA mount adapter and may be obscured with certain stands.
Power. Unplug the power cord (by pulling the plug, not the cord) from the wall outlet and disconnect all cables if any of the following conditions exists:
The power cord or plug becomes frayed or otherwise damaged.
You spill something into the case.
Studio Display is exposed to rain or excess moisture.
Studio Display has been dropped, or the case has been damaged.
You suspect that Studio Display needs service or repair.
You want to clean the Studio Display case.
Important: The only way to turn off power completely is to unplug the power cord from the wall outlet. Make sure the power cord is within easy reach so that you can unplug your Studio Display when you need to.
Note: The power cord is not removable from the display.
Power specifications:
Voltage: 100-240 V~
Current: 2.5 A
Frequency: 50 to 60 Hz
WARNING: Your AC cord has a three-wire grounding plug (a plug that has a grounding pin). This plug fits only a grounded AC outlet. If you’re unable to insert the plug into an outlet because the outlet isn’t grounded, contact a licensed electrician to replace the outlet with a properly grounded one. Do not defeat the purpose of the grounding pin.
Repairing. Studio Display should only be serviced by a trained technician. Disassembling Studio Display may damage it or cause injury to you. If Studio Display is damaged or malfunctions, contact Apple or an Apple Authorized Service Provider for service. Repairs performed by untrained individuals or using non-genuine Apple parts may affect the safety and functionality of the device. You can find more information about repairs and service at the Apple Repair website.
Medical device interference. Studio Display contains components, including magnets, that emit electromagnetic fields. These electromagnetic fields may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your Studio Display and your medical device (more than 6 inches or 15 cm apart). If you suspect Studio Display is interfering with your medical device, stop using Studio Display and consult your physician and your medical device manufacturer.
Medical conditions. If you have a medical condition that you believe could be affected by using Studio Display (for example, seizures, blackouts, eyestrain, or headaches), consult with your physician prior to using Studio Display.
Repetitive motion. When you perform repetitive activities such as typing or playing games on Studio Display, you may experience discomfort in your hands, arms, wrists, shoulders, neck, or other parts of your body. If you experience discomfort, stop using Studio Display and consult a physician.
High-consequence activities. Studio Display is not intended for use where the failure of the display could lead to death, personal injury, or severe environmental damage.
Explosive and other atmospheric conditions. Using Studio Display in any area with a potentially explosive atmosphere may be hazardous—particularly in areas where the air contains high levels of flammable chemicals, vapors, or particles such as grain, dust, or metal powders. Exposing Studio Display to environments having high concentrations of industrial chemicals, including near evaporating liquified gasses such as helium, may damage or impair Studio Display functionality. Obey all signs and instructions.