iPad mini (A17 Pro) Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
1.5 mm slotted screwdriver  | 923-10415 8.3-inch display protective cover  | 661-28153 8.3-inch heated display pocket  |
923-07622 8.3-inch repair tray1  | 922-7172 Access card  | 923-13515 Adhesive activation roller2  |
923-10424 Adhesive cutter  | Cut-resistant gloves  | ESD mat  |
ESD-safe cleaning solution  | ESD-safe tweezers  | ESD wrist strap with clip or plug  |
Ethanol wipes3  | Fireproof enclosure  | 661-52833 Heated display removal fixture4  |
Heat-resistant gloves  | 077-00827 iPad mini (A17 Pro) display adhesive alignment tray  | Isopropyl alcohol (IPA) wipes  |
Trilobe 44 mm half-moon bit  | Nitrile or lint-free gloves  | 922-5065 Nylon probe (black stick)  |
Painters tape  | Safety glasses with side shields  | Sand5  |
Sand container6  | 923-10414 Support plate  | 923-0248 Torque driver (black, 0.35 kgf cm) kit7  |
923-00105 Torque driver (green, 0.45 kgf cm)  |
1 Each repair tray comes with two suction cups.
2 Refer to the Adhesive Activation Roller Operating Manual for general use.
3 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
4 Refer to the Heated Display Removal Fixture operating manual for general use and precautions. If you purchased a new heated display removal fixture, refer to the unboxing instructions.
5 Clean, dry, untreated sand (8–10 cups)
6 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)
7 The black torque driver kit includes a black torque driver (0.35 kgf cm), Torx security bit (923-0247), and JCIS bit for crosshead screws (923-0246). The bits are also available separately.