MacBook Neo Tools
Tools with part numbers are available for purchase from the Self Service Repair Store. Tools without part numbers can be purchased from electronics supply retailers.
2 mm hex driver  | 923-02995 Adjustable torque driver (10–34 Ncm)  | 923-0735 Adjustable torque driver (0.3–1.2 Nm)  |
923-01322 Antenna tool  | 923-14408 Battery cover  | Compressed air  |
Cut-resistant gloves  | ESD mat  | ESD-safe cleaning solution  |
ESD-safe tweezers  | ESD wrist strap with clip or plug  | Ethanol wipes1  |
Fireproof enclosure  | 923-029982 Gap offset kit  | Heat-resistant gloves  |
IPA wipes  | 922-1731 Kapton tape  | 923-01803 Keycap lever  |
Magnetizer  | Needle-nose pliers  | 922-5065 Nylon probe (black stick)  |
923-0731 Pentalobe screwdriver  | Permanent marker  | 923-01800 Precut adhesive stripes (1x0.5)  |
923-01801 Precut adhesive strips (1x1)  | Safety glasses with side shields  | Sand3  |
Sand container4  | Sticky notes (3 by 3 inches)  | 923-0448 Torque driver (blue, 0.65 kgf cm)  |
923-07620 Torx Plus 1IP 44 mm half-moon bit  | 923-08468 Torx Plus 3IP 44 mm half-moon bit  | 923-08673 Torx Plus 5IP 50 mm bit  |
923-07595 Torx Plus 8IP 25 mm bit  | Touch ID alignment kit5  | 661-06670 USB-C charge cable  |
1 Ethanol wipes must contain at least 90% ethanol and no additives except isopropyl alcohol.
2 A gap offset kit is included with a replacement top case and trackpad.
3 Clean, dry, untreated sand (8–10 cups)
4 Sand container (wide-mouthed, quick pour, nonbreakable plastic container with a flip-top lid)
5 A Touch ID alignment kit is included with a replacement top case and Touch ID board.